smg hydraulic pump e46 m3 supplier

Renew your worn or burn"t out SMG pump with our remanufactured units! Our remanufactured pumps are disassembled, thoroughly cleaned and reassembled with all new components.

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.

Pentosin CHF 11S is a synthetic high performance hydraulic fluid for life-time application in modern vehicle aggregates. Pentosin CHF 11S is especially designed for hydraulics in the automotive industry with the highest technical requirements such as in: power steering, level control, shock absorber, hydro-pneumatic suspension, stability and traction control, hydraulics for convertible tops, central lock systems, etc.

This part is listed by BMW as BMW part number 21532229715 (21-53-2-229-715) and is described as SMG Hydraulic Pump with Pressure Accumulator - E46 M3.

The SMG pump on the SMG (sequential manual gearbox) equipped E46 M3 is a very well known failure point. It"s really not a question of IF your SMG pump will suffer a failure, but when. Typically, the SMG pump lasts somewhere in the neighborhood of 100k miles, but they have been known to fail with much less miles.

If your E46 M3 has suffered the dreaded SMG pump failure, you need a new SMG pump. And BimmerWorld has the best price available to assist in getting your E46 M3 back on the road.

This part is listed by BMW as BMW part number 21532229715 (21-53-2-229-715) and is described as a rebuilt SMG Hydraulic Pump with Pressure Accumulator for E46 M3.

The SMG pump on the SMG (sequential manual gearbox) equipped E46 M3 is a very well known failure point. It"s really not a question of IF your SMG pump will suffer a failure, but when. Typically, the SMG pump lasts somewhere in the neighborhood of 100k miles, but they have been known to fail with much less miles.

This is a rebuilt SMG pump with a new electric motor. The assembly has been rebuilt MLR Engineering - experts in SMG and hydraulic pumps with over 30 years of experience and their own tried and proven solutions to SMG problems.

In most cases the reason for this is because of worn electric motor, which drives the hydraulic pump in the hydraulic unit. In addition, the gap losses in the hydraulic system increase enormously at high temperatures. If many hydraulic consumers are now active (clutch slave cylinder and transmission actuator), the hydraulic unit can no longer keep up with the pressure build-up. We have ours for that Burkhart Engineering High performance hydraulic oil developed. The required system pressure we up to 25% faster built up than is the case with the normal pentosine CHF 11s.

The worn original engine can "Plug & Play" exchanged for our repair engine. The replacement engine is equipped with the required pins and seals and can be pinned directly into the original BMW wiring harness. It is a replacement part OEM quality. The alternative to avoid having to buy a new hydraulic unit.

BBA-Reman can repair your BMW SMG Pump. This is far more than just a motor replacement and involves the re manufacture and testing of the entire unit. For M5 and M6 SMG units we are able to offer a repair service, whereas for the more common M3 SMG units we also offer an exchange service for those wanting to get their E46 SMG’s back on the road with little to no delay. We also offer a repair service for the rare BMW SSG pumps.

The BMW M3 SMG pump is a self-contained unit with a motor, pump, solenoids and pressure accumulator. The M5 and M6 Getrag units are a similar setup, albeit in two units, linked hydraulically.