speeco hydraulic pump 11 gpm quotation

We are not responsible and will not warranty customer cross threading  hydraulic fittings or stripping out threads into this pump, if you are not familiar with tightening or installing pipe threads into aluminum then you will need to have someone familiar with doing so.

Do you have enough hp to bump up the pump size? The high flow hp demand can be handled by just lowering the unloading pressure setting, where it kicks to slow speed. But the small gear set (low flow high pressure) can only reduce the engine hp demand if you lower the relief valve maximum setting. That reduces your final maximum force at the cylinder/wedge.

Are you sure the old pump is dead? They don"t usually fail suddenly unless a drive coupling shears, the internal key shears inside the gear, or the check valve or unloading valve sticks open. I"d tear it down first.

Replacement Log Splitter Pump Kit: This replacement log splitter hydraulic pump kit consists of high-quality parts with high strength and hardness, which is capable of good wear resistance, durable in use and is replaceable and compatible with OEMs like Speeco, Huskee, and Champion, etc.

Powerful Hydraulic Pump: This powerful pump is a 2-stage 16GPM hydraulic pump offer you the fastest possible cycle times, which ensures a fast start and long using period for each time. It dramatically reduces the labor intensity, improves work efficiency.

Excellent Performance: Equipped with other hydraulic tools like jaw coupler and pump bracket, it can carry out lifting, pressure type, elbow, bending row, straightening, cutting, assembly, demolition and many other works with a hydraulic log splitter.

Multiple Model Combinations: As this log splitter pump kit is designed for meeting the replacement of a variety brand, the parts of this kit have a standard specification that is suited for your multiple combinations for your demands.

Wide Application: Used in applications where extending a hydraulic cylinder is needed, truck tailgate lift, scissor lift, dump trailer, lift truck, snowplow, aerial platform, road signs, material handling, wheelchair lifts, etc.

The 257-011, by MTE, is manufactured in the USA. It is commonly used by individuals building their own log splitter. It may also be used as a replacement pump for major log splitter manufacturers like MTD, Timberwolf, Champion, Ariens, and Swisher.

This 2-Stage pump fits a wide variety of log splitters and outdoor power equipment and works in both horizontal and vertical orientations. The included inlet nipple requires a 1" inner diameter suction hose.

Rated for up to 3,000 PSI at 3,600 RPM, this pump can power log splitters from 5 to 35 tons, depending on the inner diameter of the hydraulic cylinder. It features a fast cycle time by moving quickly when unloaded. It automatically shifts to low-flow/high-pressure mode at 500 PSI.

Be sure to use AW-32 10-Weight (ISO 32) or AW-46 20-Weight (ISO 46) light hydraulic fluid or Dexron III automatic transmission fluid. This pump is not designed for use with “universal” or "tractor" transmission oil, such as "303". The use of incorrect fluid may damage the pump and void the warranty.

Make sure the hydraulic fluid reservoir is not below the pump to ensure a sufficient flow of fluid to the pump. Suction-side filtration should be no finer than 150 microns. The use of a 10-25 micron filter on the suction side of the pump is too restrictive and will cause failure.

We recommend using an L-style jaw coupling to connect the pump to an engine. Couplings and mounting brackets are available. You should use at least a 5hp 163cc engine to maintain 3,600 RPM under load.