spx hydraulic pump manual manufacturer

The Power Team P-Series hand pumps come in a variety of configurations to meet the requirements of your application.  Along with various oil capacities and flow rates, you can choose from the following options:

Compact design ensures that the Power Team PA6 series pump is lightweight and portable. The PA6 series consists of single-speed pumps designed to drive single-acting cylinders. The power unit of choice for major manufacturers of auto body, frame straighteners and other equipment. Operates at 40-100 psi (3-8 bar) shop air pressure at the pump, dBA 85 at 10,000 psi (700 bar). Serviceable pump motor is not a “throwaway”, providing economical repair. Permanently vented reservoir cap. Internal relief valve protects circuit components, air inlet filter protects motor.

Compact, lightweight and portable the Power Team PA6D series pumps are single-speed pumps for driving double-acting cylinders. The PA6D series pumps operate at 40-100 psi (3-8 bar) shop air pressure at the pump. Designed with longevity in-mind the PA6D series feature internal relief valve protects circuit components, air inlet filter protects motor. Serviceable pump motor is not a “throw away”, providing economical repair. Permanently vented reservoir cap. dBA 85 at 10,000 psi (700 bar) for all PA6 pump.

Ideal for powering single-acting cylinders and portable hydraulic tools, the Power Team PA9 series pumps are easier to operate than a hand pump, designed for efficiency. Built to be economical in service; the PA9 series is not a “throwaway” unit. Unique bladder design for all-position operation and storage. Operates on 40-120 psi (3-8 bar) shop air, at 20 cfm (570 l). Hard-coat anodized aluminum housing. Oil filler with integral safety relief minimizes chance of damage to reservoir bladder if overfilling occurs.

A two-speed pump, the Power Team PA60 series pumps are designed for rapid oil delivery at low pressure to quickly advance cylinder or tool. Equipped with air pressure regulator, air filter and lubricator. Serviceable air motor for economical repair. Internal relief valve protects circuit components. Permanently vented reservoir cap.

Focused on single-speed and low pressure the Power Team PA50 series pump outputs 3,200 PSI / 220 BAR, fitting serviceable requirements for air motor for economical repair. Integrated air inlet filter protects motor. The PA50 series also features a filter in outlet port protects against contaminated systems Assorted reservoirs to suit your application"s requirements.

Rotary-Style Air Motor.  Use where air is the preferred source of energy.  3 hp motor starting under full load.  Two-speed operation for rapid cylinder advance.  Models available with full remote control over advance and return, except PA554.  Tandem center valve holds the load when pump is shut-off.

Compact, Portable, Cordless Hydraulic Pump for MRO Applications.  Compact, Li-ion 18VDC, 9.0 Ah battery-powered pump provides extended run-time.  Two-stage, high-pressure hydraulic pump offers quick tool advancement in the first stage.  Extremely compact, lightweight with an ergonomic handle grip and transport strap to ease portability.  Self-contained, rubber bladder reservoir allows pump usage in most positions with an impressive capacity of 70 cu. in. usable.  Quiet, smooth-running, serviceable brushed 18VDC motor.  High-impact, fiberglass reinforced shroud protects your investment in the most demanding and harsh applications.  Interchangeable valve configuration accommodates a vast array of applications.  CSA rated for intermittent duty, CE compliant.

The 10 series Power Team hydraulic pumps are designed to have a maximum of 690 bar (10,000 psi) at a flow rate of 164 cc/min (10 cu. in/min). All Power Team pumps come fully assembled, and each with the ability to be valved for either single- or double acting cylinders. Designed to be compact can easily mobile, the power team 10 series includes a portable power source is included for hydraulic cylinders, and tools. The permanent magnet motor is strategically constructed to easily start under load, even with reduced voltage conditions. Battery-operated models have 8 foot (2,4 m) power cord with alligator clips to connect to any 12 volt battery, optional rechargeable battery pack with shoulder strap are alternatives for maximum portability. The Power Team 10 series pump typically delivers 15 minutes of continuous operation at 10,000 psi (700 bar) on a single battery. Built to withstand High-impact, shielded with a flame retardant construction.

The Power Team 17 series pump is delibertly designed for maintenance and construction applications up to 55 Ton. For use with single-acting or double-acting cylinders at operating pressures to 10,000 psi (700 bar). For intermittent duty; starts under full load. Equipped with 1⁄2 hp (0,37 kW), 3,450 rpm, single-phase, thermal protected induction motor; 10 ft. remote control cord (PE172S has 25 ft. (7,6 m) cord) Low amperage draw; small generators and low amperage circuits can be used as power source. Extremely quiet noise level (67-81 dBA).

Vanguard Jr. + Power Team 18 series pumps provide two-speed high performance in a light-weight, compact package. Designed to provide a gauge port and metal reservoir on all pump models. Equipped with a 1⁄2 hp (0,37 kW), 115 volt, 60/50 Hz single phase motor that starts under load, even at reduced voltage. Low amperage draw permits use with smaller generators and low amperage circuits. All pumps have a 10 foot (3 m) remote control. CSA rated for intermittent duty. Noise level of 85-90 dBA. For operating hydraulic crimping, cutting or other tools: No. PE184C - Allows you to alternately operate a spring-return cutting and/or crimping tool without disconnecting either tool. Select a port connection with a manual 4-way valve, start the pump with a remote control hand switch and extend the connected tool. When the hand switch is switched to off, the pump stops and the automatic valve opens, allowing the tool to return. In the center (neutral) position, a manual control valve holds the tool in position at the time valve is shifted.

The 21 series Power Team pump and RD5513 cylinder used in a special press that produces pharmaceutical-grade extracts for herbal medicines. Totally enclosed, fan cooled induction motor: 1 hp (0,75 kW), 1,725 rpm, 60 Hz, single phase. Designed intentional for thermal overload protection. Remote control, with 10 foot (3,1 m) cord is standard on pumps with solenoid valves. Manual valve pumps have “Stop”, “Start” and “Run/Off/Pulse” switches. Pump controls are moisture and dust resistant. Motor drip cover with carrying handles and lifting lug. Low noise level of 70 dBA@ 10,000 psi (700 bar). In the event of electrical interruption, pump shuts off and will not start up until operator presses the pump start button. 24 volt control circuits on units with remote controls provide additional user/operator safety.

Ideal for running multiple tools or cylinders from one power unit. Recommended for cylinders up to 75 tons. Two-speed pumps have the same low pressure and high pressure flows from both valves. Flows and pressures of each pump are independent. Delivers 300 cu. in./min. of oil at 100 psi (4,8 liter/min of oil at 7 bar) and 25 cu. in./min. at 10,000 psi (0,4 liter/min at 700 bar) from each pump. 1 1/2 hp, 110/115 volt, 60 Hz (1,12 kW, 220 volt, 50 Hz) induction motor, 10 foot (3,1 meter) remote control and 5 gallon (19 liter) steel reservoir. Models available for operating single-acting or double-acting cylinders. Each power unit contains two separate pumps and two separate valves allowing operator to control multiple processes with one power unit. Both pumps on each power unit are equipped with an externally adjustable pressure relief valve. Not recommended for frequent starting and stopping.

The Power Team 30 series pump is intently ideal for maintenance and construction applications.  Operating both single-acting or double-acting cylinders. A dynamically built, Integral roll cage protects the 30 series pump from many forms of damage. 1 hp (0,75 kW), single phase, permanent magnet motor. High performance to weight ratio. Starts under full load even when voltage is reduced to 50% of nominal rating. Quit operations: 82 dBA @ 10,000 psi (700 bar) and 87 dBA @ 0 psi (0 bar). CSA rated for intermittent duty. Remote controls and/or solenoid valves feature 24 volt controls.

The Power Team 46 series is best suited for under the roof maintenance and production applications. Equipped with two-speed high-performance pump, for use with single- or double-acting cylinders at operating pressures to 10,000 psi (700 bar) the 46 series pump is versitile. With a 1 1⁄2 hp (1.12 kW), 3,450 (2,875) rpm single-phase, 60 (50) Hz thermal protected induction motor that starts under full load. Noise level of 77-81 dBA. All equipped with a 10 foot (3,1 m) remote control except PE462S which has a 25 foot (7,6 m) remote control. 24 volt control circuit on all units with remote control. CSA rated for intermittent duty.

A powerful multifaceted pump, the Power Team 55 pump excels at multiple applications. From heavy construction to concrete stressing this pump series is designed for intensity. With low voltage starting possible,  the 50/60 Hz universal motor; draws 25 amps at full load, and can start at reduced voltage. CSA rated for intermittent duty. 10 foot (3,1 m) remote motor control (except PE552S which has a 25 foot (7,6 m) remote motor and valve control). True unloading valve achieves greater pump efficiency, allowing higher flows at maximum pressure. Reservoirs available in sizes up to 10 gallons (38 liter). Lightweight and portable. Best weight-to-performance ratio of all Power Team pumps. “Assemble to Order” System: There are times when a custom pump is required. Power Team’s “Assemble to Order” system allows you to choose from a wide range of pre-engineered, off-the shelf components to build a customized pump to fit specific requirements. By selecting standard components you get a “customized” pump without “customized” prices. All pumps come fully assembled, add oil and ready for work.

A compact lightweight pump, the Power Team 60 series is designed for rugged applications and low voltage starting. Experiencing a long, trouble-free life in the most demanding work environments, the 60 series is durable.. Powered by 1 1⁄8 hp, 115 volt, 60/50 Hz (0,84 kW, 220 volt, 60/50 Hz) single phase motor. Starts under load, even at the reduced voltages at construction sites. Optional fan-driven external oil cooler includes rollover guard. Insulated carrying handle. Integral 4" (102 mm) diameter fluid-filled pressure gauge with steel bezel complies with ASME B40.1 Grade A. 0 to 10,000 psi (0 to 700 bar) pressure range in 100 psi (7 bar) increments. Sealed 3⁄4 gallon (4,34 liter (usable) reservoir. Reservoir drain port is standard. Standard oil level sight gauge for accurate oil level monitoring. External spin-on filter removes contaminants from circulating oil to maximize pump, valve and cylinder/tool life.

The Power Team PQ60 series pumps are designed specifically for heavy-duty, extended cycle operation. Integrating single- or double-acting cylinders the PQ60 series is versatile. Constructed for longevity by employing a metal shroud keeps dirt and moisture out of motor and electrical components. An electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption. Internal relief valve limits pressure to 10,000 psi (700 bar). External relief valve is adjustable from 1,000 to 10,000 psi (70 to 700 bar). The Power Team PQ60 pumps operate below maximum OSHA noise limitation (74-76 dBA). Start and operate under full load, even with voltage reduced by 10%.

The Power Team 120 series pump is exactingly designed for heavy duty, extended cycle operation up to 400 Ton. Built in grit, the series 120 pump can start and operate under full load, even with voltage reduced 10%. An electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption. Internal relief valve limits pressure to 10,000 psi (700 bar) and an external relief valve is adjustable from 1,000 to 10,000 psi (70 to 700 bar). Pump prewired at factory with a 3 hp, 460 volt, 60 Hz (2,24 kW, 380 volt, 50 Hz), 3 Phase motor. Other electrical configurations are available. 24 volt control circuits on units with remote controls for added user/operator safety. 3 hp (2,24 kW) 3 phase motor with thermal overload protection. Motor starter and heater element supplied as standard equipment; with an intentionally designed metal shroud to keep dirt and moisture out of motor and electrical components. Pumps operate below maximum OSHA noise limitation.

With high tonnage double-acting cylinders, the Power Team 400 series offers both single or multiple cylinder applications. Two-speed high output pump delivers up to 5 gpm (16 liter/min) of oil, with a low noise level of 73-80 dBA. Integral electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption. Over-current protection prevents damage to motor as a result of overheating. “Stop” and “Start” control buttons are 24 volt. PE4004 has a 4-way/3-position manual valve. The PE4004S has a 4- way/3-position solenoid valve with a 24 volt remote hand switch. External pressure relief valve is adjustable from 1,500 to 10,000 psi (100 to 700 bar). Heavy duty 4" (50,8 mm) diameter casters assure easy maneuvering. 20 gallon (3,927 cu. in. usable) / 75,7 liter (62,8 liter usable) reservoir has a low oil level sight gauge. Powered by a dual voltage 10 hp (7,46 kW), 3 phase, 1,725 (1,437) rpm motor. 3 phase motor has all the electrical components necessary to operate the pump.The customer has no hidden charges when making purchase. Deliver 1,200 cu. in./min. (16 liter/min) of oil @ 200 psi (15 bar), 420 cu. in./min. (5,6 liter/min) of oil @ 10,000 psi (700 bar).

Power team synchronized lifting and lowering system, the MCS ( motion controller system ) series can be used in many hydraulic applications where load position is critical, requiring cylinder synchronization. Whether it is a bridge, a building or any kind of heavy load, with the SPX FLOW power team motion control system, lifting, lowering, pushing, pulling, tilting or positioning loads can be carried out automatically with a high degree of accuracy. The PLC-controlled system is a combination of digital actuation and digital control providing significant advantages such as time savings, repeatability, and extremely low internal stress in the object one is moving. The system also provides documentation for the movement performed.

Extremely durable yet lightweight and operable under low-line voltage conditions, the Power Team PE-NUT series pumps are constructed for challenging conditions. A 115V 5/8 hp (0,46 kW) universal electric motor (50/60 cycle), employing a two-stage pump for efficiency and designed for use with spring-returned remote tools. The PE-NUT series pumps also feature high-pressure safety relief valve, remote hand control with 10-foot (3,1 meter) cord, and a pressure matched quick-coupler supplied. The PE-NUT series uniquely utilizes intermittent duty, piston-type high-pressure pump supercharged by a low-pressure pump. CAUTION: DESIGNED FOR CRIMPING APPLICATION ONLY! This system should not be used for lifting.

Gasoline power ideal for remote locations.  A logical choice at work sites where electricity or compressed air are unavailable. For single or double-acting cylinders at operating pressures up to 10,000 psi.  All gasoline engine/hydraulic pumps feature Posi-Check® valve to guard against pressure loss when valve is shifted from “advance” to “hold.”

PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line which allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in “return” position.

PG1200 Series pumps powered by a Honda 4-cycle, 5.5 hp engine with automatic decompression and electronic ignition. Deliver over 0.5 gallon (130 cu. in.) of oil per minute at 10,000 psi.

Rubber anti-skid insulation on bottom of reservoir resists skidding and dampens vibration. PG1200M-4 and PG1200M-4D include a pump cart with 12” wheels.

The Power Team HB series is purposefully constructed to convert low-pressure portable hydraulic pumps or on-board hydraulic systems, into high pressure power sources. HB series applications include utilities, railroads, construction, riggers and others. This product operates single or double-acting cylinders, jacks, and tools such as crimpers, spreaders, cable cutters, or tire tools. Version for use with double-acting torque wrenches available. May be used to operate two separate, single-acting tools (with integral valves) independently, without need for additional manifold. Control valve included. Other Power Team valves available as an option to suit your specific application, if needed; consult factory. Compact and rugged for use inside a utility vehicle aerial bucket or stowing in a vehicle. No reservoir level to maintain; uses low pressure system as oil supply. Has 3⁄8" NPTF ports; compatible with standard fittings for low and high pressure systems.

Portable two-speed pump operated in any position (open or closed-center) providing pressures up to 10,000 psi for the operation of high-pressure tools.

These compact, lightweight boosters do not have reservoirs. The units can be operated in any position on either open- or closed-center (accumulator) hydraulic systems.

“Assemble to Order” means you can choose a basic pump with gas, air or electric motor. Then select the proper valve, gauge, pressure control, motor control and reservoir. You get a two-stage pump that gives high oil volume for fast cylinder approach (and return with double-acting cylinders) in the first stage and high pressure in the second stage.

3 HP Jet Motor, Three-Phase.  Gives low noise level and long life due to its moderate operating speed. Ideal for fixed installations. Consists of basic 10,000 psi pump, jet pump motor: 3 hp, 3,450 rpm, 230/460VAC, 60 or 50 cycle (specify). AC three-phase, with thermal overload switch. Equipped with internal and external relief valve. Will start under load.

or cannot be used. The 5,000 or 10,000 psi pump has a 3 hp air-driven motor at 3,000 rpm (optimum performance based on 80 psi air pressure and 50 cfm at the pump). You can drive single or double-acting cylinders with the correct valve.  NOTE: 80 psi air supply required to start under full load.

unavailable. It is capable of continuous operation at full pressure. Consists of basic 10,000 psi pump, 4-cycle Briggs & Stratton “Diamond Edge” gasoline engine, developing 6 hp. As with all these pumps, this unit can be valved for use with either single or double-acting cylinders.

SPX FLOW brand Power Team specializes in high-pressure hydraulic technology. Through a broad range of leading-edge component parts, accessories and tools, Power Team enables the creation and upkeep of concentrated force delivery solutions that can meet any application criteria. These cover lifting, lowering, pushing, pulling, clamping, spreading and torquing activities. The Power Team portfolio features hydraulic pumps covering a wide variety of flow stage configurations and reservoir capacities, compact yet powerful jacks, cylinders (single and double action) and valves (load-lowering, shut-off, pressure-reducing, sequence, metering, etc.). In addition, Power Team supplies nut splitters, in-line drives, spreaders, bridge lifts, shop presses, mobile floor cranes and torque wrenches. Through this comprehensive portfolio, Power Team attends to the needs of the construction, automotive assembly, mining, shipbuilding, manufacturing and industrial processing sectors. Thanks to rugged design plus advanced protective coatings, Power Team equipment is able to cope with deployment in the most uncompromising of applications. It thereby delivers ongoing functional reliability under a range of stresses to an extent. As well as providing repair and maintenance services, Power Team also offers on-site safety training so customers can support the wellbeing of their workforce in potentially hazardous environments.

Hand pumps are mechanical devices used to move liquid or air from one position to another. In their simplest form, hydraulic hand pumps use cylinder actuators to convert mechanical force into hydraulic energy. These pumps are operated by hand and are designed forlow pressureapplications.

The average human cannot manageconsistentpressure of more than a tenth of 1 horsepower for more than a minute. For this reason, most hand pumps are slow and are mostly used as an auxiliary hydraulic power source. Even though, hand pumps can generatepressureof more than 10,000 psi.

Hand pumps come in many shapes and sizes. And their applications are just as extensive. You can find hand pumps being used around the home, on various implements on farms, in light industrial settings, and even in large plants and factories.

A simple demonstration of the differences in size and scope of application for the technology behind hand pumps is a comparison between a bicycle tire pressure pump and a borehole pump. Both are hand pumps but are wildly different in their design, size, and application.

In industrial applications, the most common hand pump is the hydraulic version, which is used for dispensing lubricants that power all manner of hydraulic tools including:

Because of their relatively compact size, these pumps are also ideal for use in remote applications and on mobile equipment and machines with a variety of hydraulic tools.

There are also hand pumps designed for multi-purpose use. Such pumps can be used to transfer fluids as well as air. All it takes is a change of the nozzle and you can be using the same pump you were using to empty a drum of oil to inflate a tire.

While hand pumps are mostly employed to transfer air and fluids for powering hydraulic equipment as well as lubrication and fueling processes, there are also hand pumps used for instrument calibration purposes. These high precision hand pumps ensure measuring instruments are operating to their specifications.

For this application, hand pumps provide a cost effective way of testing the accuracy of pressure instruments. The risks for inaccurate measurements for most industrial applications are usually quite severe.

A basic hand pump design features a reciprocating piston and two check valves on the entry and exit ports, which operate in alternation. At the base of the technology is the ability of the hand pump to use the air vacuum created by the piston on the inlet port to draw, or suck, and lift media from the reservoir and then, using the piston’s return force, transfer or discharge it to where it is desired.

A hand pump’s ability to displace a fluid is determined by the distance between the pump itself and both the source of the media to be pumped and the point to where it will be pumped. Just as critical is the size of the pump’s cylinder and the amount of power the person operating the pump is able to exert on the pump.

The total tonnage specified for the tool the hand pump is powering also determines if the hand pump will be suitable for the application. Just as well, the diameter of the pipe through which it is pumped also dictates just how much power you will need to putbehindthe pump to displace the fluid.

There are two basic types of hand pumps - single and double acting hand pumps. The two are separated by the speed at which they transfer the lubricant fluid and generate the power necessary for each application.

● Single acting hand pumps rely on a spring to move the hand pump piston back when it retracts to suck in more fluid. The working fluid works only on one side of the cylinder.

● Double acting pumps on the other hand, instead of springs, uses fluid pressure that is pushed in and out of the cylinder, to move the piston. These pumps have two ports for the fluid inlet and outlet.

Due to their popularity, hand pumps have become utility items in most industrial settings. As a result, these pumps must meet the most stringent requirements for strength and function.

The best hand pumps are designed to be easy to operate, maintain, and repair. Of course, the best hand pumps are those that require the leastmaintenance,or make such maintenance as cost effective as possible.

The construction of these pumps has to be robust as some will likely be used in tough and demanding applications. Others will be subjected to extreme heat, wet, or cold conditions, where corrosion and other risks should be expected. There is even the likelihood that the pump will be subjected to a large volume of work, which speeds the wear and tear.

For all these reasons, hand pumps from the leading manufacturers have bodies made fromhigh gradesteel and rubber for the handles. The parts that are most susceptible to friction, and the subsequent wear and tear, are also made from hardened steel, which is stronger and guarantee years of repeated use.

The goal with every hand pump design should always be high output fromlowoperating force. This translates to a hand pump that is both easy and cheap to operate.

For something that is also made to be mobile, in most cases, hand pumps should be a compact and lightweight build for greater portability. This is why some hand pump models have bodies madefromaluminum as opposed to steel.

The result is a hand pump that weighs, in some cases, half the weight of a hand pump featuring a steel body. Lightweight pumps are handy for applications where the operator has to constantly lift and move the pump around.

Needless to mention, a well-designed hand pump, that is made from the best materials will also be reliable and won’t break down on you while you are out in the field.

Hand powered pumps have been used since the middle ages, mainly to draw water from wells. Since the industrial revolution, their areas of application have multiplied exponentially. This is despite the fact there is now a wider choice of alternative energy sources for powering them, like electric motors.

This is an obvious one. Hand pumps do not need any power source, other than the operator’s physical force. For a motor powered pump, there would need to be an electricity port to plug the pump into. This presents a major cost saving, especially for pumps that have to be used frequently.

Hand pumps feature a simple design and are made to be easy to operate. They don’t require any special knowledge to operate. Even for servicing, hand pumps are fairly easy to maintain and service.

The first benefit of using hand pumps we cited is their relative cost and energy efficiency. But the fact that these pumps don’t need to be hooked up to a power source to be operated also makes them highly mobile.

You can take your hand oil pump anywhere, which allows you to oil and power your important tools and equipment from the field. This has tremendous advantages for saw mill rigs and other light sawing equipment for which you will need an auxiliary power source, and which you have to tow to remote locations where you don’t have access to electricity.

The hand pump you select should be the result of a careful assessment of your particular application. For hand pumps, the good news is you don’t need to worry about the source of power for your pump.

● Know the required operating force needed to power the hydraulic tool you will use the hand pump with. Most hand pumps indicate their maximum pressure output.

● Your application is also a guide for the displacement or how much oil the hand pump must dispense per stroke. This informs whether you need a one ortwo speedpump.Two speedpumps dispense a higher volume of oil at low pressure for faster pistonmovement,and then shift to higher pressure while still under load.

● This last factor is also directly related to a pump’s oil reservoir capacity. A larger reservoir capacity means your hand pump can power a wider range of tools and cylinders. Such a hand pump will be more expensive. But the benefit is you will only need to buy just one hand pump, which you will use for a myriad of applications as opposed to having several sized hand pumps for different applications.

● The hand pump’s weight is also a critical measureforits suitability for your particular application. If you are going to be working out in the field where you will need to move the hand pump around, it is common sense that the pump will need to be light enough to carry. This is when an aluminum body is a better choice over a heavier steel body hand pump, even though it is more expensive.

Like all other tools, your hydraulic hand pumps will benefit from generous care and maintenance. When properly cared for, your hand pump can serve you for many years and repay your investment many times over. Here are a few hand pump use and maintenance tips to remember:

There are many manufacturers of hand pumps. All the different hand pumps from these manufacturers may look different but the technology they use is essentially the same. That said, the quality of construction, including the materials used, separates the good from the bad quality hand pumps.

Power Team and Hytec are two of the leading hydraulic hand pump brands. Their hand pumps are marked by their strong build quality, reliability, serviceability, as well as ease of repair.

Power Team is a hydraulic tools brand owned by the SPX Flow Company. These hand pumps are sold and used in different applications all over the world. The brand markets one and two-speed hand pumps for use with hydraulic cylinders and tools. Thetwo speedhand pumps are marked by a higher oil volume, which enables faster piston reciprocation for faster fluid transfer.

Hytec, also owned by SPX Flow, is a leading, Italian-made hydraulic tools and equipment brand that produces both single and double acting hydraulic hand pumps. Their hand pumps generate up to 350barof pressure and are specified for use in many different industrial applications.

Actuator - Is a hydraulic system component, like the cylinder, that provides the hydraulic power hand pumps use to produce the mechanical energy needed to power different tools and equipment.

Auxiliary power - Is an alternative power source, like hydraulic pressure provided by hand pumps used in areas where grid electricity is not accessible or feasible to use with some tools.

Pressure relief valve - Is a valve that relieves excess load pressure to ensure a hand pump is protected from damage by load weights that exceed the maximum allowed for it.

Single acting cylinder pump - Is a hand pump with a cylinder that can only apply pressure through an adjustment nob that controls flow in one direction only.

For Sales, Rental and Service, please contact a Jones Hydraulic Service SPX Power Team Hydraulics Specialist at 713-674-9571 or fill out the form at the bottom the page.

Extremely durable yet lightweight and operable under low-line voltage conditions, the SPX Power Team PE-NUT series pumps are constructed for challenging conditions. A 115V 5/8 hp (0.46 kW) universal electric motor (50/60 cycle), employing a two-stage pump for efficiency and designed for use with spring-returned remote tools.

The PE-NUT series pumps also feature a high-pressure safety relief valve, remote hand control with 10-foot (3.1 meter) cord, and a pressure matched quick-coupler supplied. The PE-NUT series uniquely utilizes intermittent duty, piston-type high-pressure pump supercharged by a low-pressure pump. Includes case.

Power Team hand pumps, with the angled fill port, have a built in “relief valve” protection system. This system is designed to protect over-pressurization of the reservoir from sudden back pressure. This system also works as a seal to prevent oil leaks.

We try to keep a supply of these pumps in stock for single piece or small quantity orders. Large quantity and OEM orders can be fulfilled quickly via drop ship directly from the factory. Drop shipments are generally dispatched within 2-3 days from the date of purchase. For large quantity orders, please feel free to contact us for availability.

... pneumatic or electric operation for both single acting and double acting cylinders. A wide range of accessories is also available. Electric and Air Hydraulic Pumps.

A powerful multifaceted pump, the Power Team 55 pump excels at multiple applications. From heavy construction to concrete stressing this pump series is designed for intensity. With low ...

Compact, lightweight and portable the Power Team PA6D series pumps are single-speed pumps for driving double-acting cylinders. The PA6D series pumps operate at 40-100 ...

Compact, Portable, Cordless Hydraulic Pump for MRO Applications. Compact, Li-ion 18VDC, 9.0 Ah battery-powered pump provides extended run-time. Two-stage, ...

Like all the pumps of the HP Series, it is suitable for any hydraulic application which require very high hydraulic output pressures and a moderate and controllable oil flow, to ensure ...

... 1000bar. The HP-REMOTE pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and controllable oil flow. ...

... complete with hydraulic hose and fittings, always ready to use, this pump is suitable for small hydraulic punching machines, cutting equipments, punching machines.

... battery powered hydraulic pump is designed for operator convenience in terms of handling and power supply. Driven by a powerful 14.4V long life battery the unit takes away the physical ...

... lightweight and portable hydraulic hand pump, specifically designed for high pressure applications. A fine adjust allows precise control of pressure, while a vent valve ...

Battery-operated hydraulic pump ANP450 is designed for connection with cutting, crimping and punching heads; useable as mobile, cordless hydraulic assembly pump ...

The HTL Worldwide Power-Pro Hydraulic Torque Pump is available with a multi-tool manifold (as pictured) allowing up to four tools to be used simultaneously ensuring equal, parallel closure of flanges; ...

Enables rapid extension of a cylinder. As soon as the cylinder makes contact with a load, the pump is automatically switched on to raise the load in the high pressure stage.