starter solenoid for hydraulic pump quotation

Dump Trailer KTI Solenoid for Hydraulic Pump SKU# KTI -12V-391-40We stock Official Diamond C trailer parts. This KTI solenoid with magnets included is designed to fit Diamond C Pumps.Brand New In Stock and ready to ship. It never hurts to have a backup just in case. Order Yours Today.

【High Quality】Intermittent Duty Solenoid is made of tough plastic and durable copper, Coil Roll is using 180℃ copper wire, which allows it to be used in the harshest environmental conditions, protects against dust and water jets, dust& liquid resistant, anti-rust and corrosion. 100% OEM Match and Replacement.

【OEM Parts Number】Solenoid Switch Replaces Part Number: Prestolite SAZ-4201GJ 7522 SAZ-4201ER Monarch/Bucher 07522 IRON BULL Dump Trailer Solenoid Also suitable for pj dump trailer with KTI system OEM Part# 190107;for Dump Pump Part# 070009 Dump Traile.

【Application】This 4 terminal solenoid is commonly used by hydraulic dump trailer manufacturers (eg Load Trail, Parker Performance). It works on power up / power down dump trailers.It can also replace the solenoid valve of the hydraulic leveling jack on the motorhome. Also common on many other brand dump trailers.

【replacement】 Dump trailer solenoid Genuine CASE, CAT, PRESTOLITE replacement part for small gasoline engines. This OEM part ensures proper fit and performance to maintain the life of your CASE, CAT, PRESTOLITE engine.

According to the different requirements of customers, our DC motors have been broadly used in the fork-lift, container van tail-board, van door system, jumping car, snow-sweeper, etc.

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to HEWITT lifts, docks, and canopies.

HEWITT Machine and Manufacturing, Inc. warrants all HEWITT-built docks and accessories purchased new by original owner to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer’s warranty, wherein that warranty will apply). Aluminum decking is separately warranted for a period of five years. Warranty is void when misuse or neglect is the cause. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection, they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by other manufacturers: Flotation tanks carry a manufacturer’s 12 year warranty.

We at HEWITT would like to thank you for your interest in our products. We are confident that you will find the service, quality, workmanship, and design of all HEWITT products to be the industry’s finest. For over 40 years, boat and watercraft owners have trusted the safety and longevity of their investments to Hewitt lifts, docks, and canopies.

HEWITT Machine and Manufacturing, Inc. further warrants all other parts used on HEWITT-built lifts and accessories, purchased new by original owner, to be free from defects in the material and workmanship under normal use for a period of 24 months from the date of purchase (excluding components and options which carry their own manufacturer’s warranty, wherein that warranty will apply.) Warranty is void when misuse or neglect is the cause. Specifications are subject to change without notice. THIS WARRANTY IS VALID ONLY IN THE UNITED STATES AND CANADA FOR PRODUCTS USED FOR FRESH WATER. CHECK ON REQUIREMENTS FOR USE IN SALTWATER.

No other express warranty or guaranty, except as mentioned above, given by any person or entity with respect to HEWITT products shall bind HEWITT Machine and Manufacturing, Inc. This warranty supersedes all other warranties expressed or implied. NO IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLY TO HEWITT PRODUCTS AND ARE HEREBY DISCLAIMED.

In the event of a possible warranty claim, the defective products must be returned to HEWITT Machine and Manufacturing, Inc. If proven to be defective upon inspection they will be exchanged for new or comparable rebuilt products, as determined by HEWITT Machine and Manufacturing, Inc. and shipped back to the original purchaser. All shipping costs are the responsibility of the customer. Warranty replacement shall not extend the original warranty period of the defective HEWITT products. HEWITT Machine and Manufacturing, Inc. must be notified in writing within one month of the expiration of the applicable period of the express limited warranty stated above for an item to be evaluated for warranty.

The customer’s remedies with respect to defective HEWITT products shall be exclusively limited to the repair or replacement remedy as above provided and in no event shall HEWITT Machine and Manufacturing, Inc. be liable for loss of profits, revenues, savings, inconvenience, associated costs, expense for equipment or service, use of capital, facilities, services, storage charges, damage to property, or any other special, incidental or consequential damages caused by the use or misuse of, or inability to use, the HEWITT product, regardless of the legal theory on which the claim is based, and even if HEWITT Machine and Manufacturing, Inc. has been advised of such damages. In no event shall recovery of any kind against HEWITT Machine and Manufacturing, Inc. be greater in amount than the purchase price of the HEWITT product sold by HEWITT Machine and Manufacturing, Inc. and causing the alleged damage. Without limiting the foregoing, the purchaser assumes all risk and liability for loss, damage or injury to persons, animals or property arising out of use or misuse of, or inability to use, the HEWITT product. HEWITT Machine and Manufacturing, Inc. is not liable for third party claims. This limited warranty shall not extend to anyone other than the original purchaser of the HEWITT product, or the person for whom it was purchased as a gift, and states your exclusive remedy. In no event shall HEWITT Machine and Manufacturing, Inc. be liable for incidental or consequential damages to the full extent such may be disclaimed by law.

Non HEWITT Machine and Manufacturing, Inc. manufactured products are sold “as is”, without warranty of any kind by HEWITT Machine and Manufacturing, Inc., including an implied warranty regarding MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, and all such warranties are disclaimed. The sole warranty, if any, with respect to such non HEWITT Machine and Manufacturing, Inc. manufactured products is given by the manufacturer or producer thereof. Based upon HEWITT Machine and Manufacturing, Inc.’s knowledge the following warranties are provided by other manufacturers: Hydraulic pumps and hoses carry a manufacturer’s 2-year warranty. Hydraulic cylinders carry a manufacturer’s 1-year warranty. BoatPort controller carries a manufacturer’s 1-year warranty.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

However, large currents need a large switch, and the ignition switch (or starter switch) is too small to handle this. That’s where starter solenoids come in.

In this article, we’ll explore starter solenoids and how it functions with the starter motor. We’ll also cover some solenoid related FAQs, including signs of a solenoid going bad.

The starter solenoid is a powerful electromagnet switch, which is why it’s sometimes called a solenoid switch. It activates the starter motor of an internal combustion engine.

You might also hear it referred to as a starter relay. However, most modern car models have that title reserved for a separate relay in the starter solenoid’s control circuit these days.

The small terminals are for the ignition coil and starter control wire that connects to the ignition or starter switch. One large terminal is for the battery cable from the positive battery terminal. And the other large terminal is for the wire that sends voltage to the starter motor itself.

The starter circuit connects the battery to the starter motor. The solenoidacts as the on/off switch for the starter motor circuit — controlling the burst of electrical current from the battery.

When you activate the ignition switch, the car battery energizes the control circuit. A small current flows from the battery to the starter solenoid, creating a magnetic field around the solenoid coils.

The magnetic field draws a plunger down the center of the coils, pushing the starter solenoid contacts together. This bridges the gap between the battery and the starter motor, allowing voltage to reach the starter motor.

As the solenoid coils pull in the plunger, a lever fork attached to the end of the plunger pushes out the starter gear or pinion gear. This movement meshes the small pinion gear with the larger engine flywheel ring gear.

The electrical current flows through a shunt to the holding windings only — saving some power, delivering more to the starter motor, and reducing heat buildup.

When the ignition switch is released, the magnetic force is reduced, and the holding coil releases the plunger. The starter solenoid contacts open, cutting battery power from the starter motor.

The starter solenoid receives a small current from the 12 Volt battery. It engages the starter pinion gear with the flywheel ring gear and closes the starter motor circuit — sending battery voltage to the starter motor.

With battery power available, the starter motor armature rotates the starter drive shaft and the pinion gear attached to its end. The pinion spins the flywheel, cranking the engine.

As the flywheel speed picks up, the engine starts, and the pinion gear disengages. The pinion usually has a one-way sprag clutch that allows it to spin independently of the starter drive shaft once the flywheel moves faster, preventing backdrive.

If you pop open your engine compartment, you can follow the positive battery cable to the starter motor. The starter motor is often bolted to the engine or transmission, and the solenoid is almost always attached to it.

Starter motorspins without fully engaging the flywheel: This is usually because of a weak solenoid that doesn’t engage the starter gear (pinion gear).

Enginecranks slowly: High resistance in your solenoid burns out the solenoid contacts, creating excessive resistance in the starter motor, and causing slow cranking.

Note:A repetitive clicking noise coming from the engine compartment during startup, instead of a single one, can indicate a dead battery or electrical system problem. It’s unlikely to be a starter problem.

Some symptoms from other issues can mimic those of a bad starter solenoid. If there’s no problem with the solenoid, you could be looking at these problems instead:

Place the metal blade of the insulated screwdriver across both metal terminals. Doing this bypasses the solenoid, creating a direct connection between the ignition switch and the starter motor.

If there’s steady humming, the motor is fine, and the solenoid is likely defective. If the motor doesn’t start or sounds choppy, then the motor likely has problems.

To get your solenoid fixed and ensure your starting system is healthy, it’s always best to let a professional deal with it. A mobile mechanic is an even better option as they can come to you.

The starter solenoid is a small but powerful relay switch that’s essential to your vehicle’s startup. It delivers up to 200A (and sometimes even more!) each time the ignition is turned on.

RepairSmith is readily available to help you deal with any solenoid and starter motor problems. Just contact us, and our expert mechanics will be at your driveway in no time!

I found this on the Surplus Center website, https://www.surpluscenter.com/. I thought you might be interested in seeing it for yourself. Please click on the following link to view the page: