submerged hydraulic pump brands

This submersible centrifugal design requires no priming and can run dry all day without damage. Direct drive requires no maintenance as all moving parts are self lubricated with passing hydraulic fluid. A semi closed designed stainless steel impeller will not corrode and will draw down water to a depth of only 1 inch.

Pump can handle the removal of water containing solids up to 30%. It is perfect in the pumping sites of water, sand slurries, gravel and sludge on job sites.

The SP30 is fitted with flush face coupler that threads directly into SAE ports, No Npt hydraulic joints to weep. The SP30 Water Pump comes with a 3” male NPT output port fitted with a 3” Cam Loc fitting standard.

Hydraulic motor must return into a open / non-pressurized reservoir open circuit. Back pressure on the discharge / return side of the hydraulic will damage shaft seal. Skid steer need to be aware of this.

Since 1978, contractors have recognized Holland Pump as the premier choice for ruggedly designed and dependable portable submersible pumps. Engineered to pump continuously 24 hours a day under harsh conditions, Holland Submersible Pumps are ideal for high volume, low head applications such as lake dewatering, gravel pits, quarries, control boxes, and various open ditch applications. The power unit is designed to be placed in high locations up to 300 feet away from the pump head.

Submersible pumps do not require priming because the pump is submersed in the water. 90% of problems with suction pumps are in reliable priming with suction heads over 10 feet.

The SM50 water pump is fitted with dripless flat-faced HTMA quick couplers for easy connecting and disconnecting of the pump and hydraulic system. The water outlet is a 3-inch pipe thread fitted with a 3-inch groove fitting to which can be connected a cam hose end fitting. Access to the pumping chamber for cleaning requires the removal of only two cap screws. The motor with the impeller attached is then easily removed from the pump casing. The SM50 can draw down water to a depth of 3.5 inches. Putting the SM50 in a sump will allow it to pump all but 3.5 inches of water remaining in the sump. The integral screen effectively keeps solids larger than 3/8 of an inch out of the pump. The pump will handle clear water and water containing up to 10% solids.

Manufacturer of standard and custom high temperature transfer and circulation pumps for molten metal processing application. Graphite, ceramic and stainless steel materials used. Available in flow rate up to 20,000 lbs/minute circulation and 12,000 lbs/minute low head aluminum transfer. Maximum temperature ranges up to 1400 degrees F. Features include air-powered, corrosion resistance, non-pulsating and non-clog. Capabilities include CAD, CNC machining, design, emergency repair, fabrication, integration, simulation, post-sales service and support, preventative maintenance and repair and rebuild. Secondary services such as application engineering, engineering support and field service provided. Prototype and low to medium volume production runs offered. Serves the alternative energy, transportation, automotive, construction, chemical, defense, department of energy (DOE), laboratory, pump and research industries.

Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.

The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.

When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.

First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.

Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.

Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.

All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.

Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.

To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.

When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.

Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.

Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.

Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.

Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.

External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.

Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.

Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.

Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.

Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.

Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.

Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.

Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.

Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.

Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.

Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.

To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.

To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).

Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.

The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.

Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.

Since 1935, Muncie® Power Products has been a leading source of mobile power components to the truck equipment industry. In addition to Power Take-Offs and hydraulic motors, Muncie offers directional, pressure and flow control valves as well as system design capabilities. Call us today or visit our website for more information.

FluiDyne is an ISO certified manufacturer of hydraulic pumps, motors & valves. Our promise is to serve and respect the rebuilders and resellers of North America and the global market with high quality new and remanufactured pumps, motors, valves, filters and filter elements.

Having innovative solutions for mission-critical applications makes Hydraulics Technology the preferred. For over 25 years, our impressive list of hydraulic pumps has met the needs of various applications. In assuring the highest quality products to our customers and meeting their expectations, Hydraulics Technology maintains ISO Certification. HTI is ISO 9001:2008 Certified.

Industrial Flow Solutions is a trusted manufacturer of hydraulic pumps and centrifugal pumps. We pride ourselves on our high-quality products and personalized customer service. Various industries we serve include industrial, food & beverage, and medical. All of our products are tested to ensure quality and durability.

AeroControlex began manufacturing pumps in Cleveland, Ohio in 1945. Over the years, AeroControlex has established itself as an industry leader in the production of hydraulic, fuel, lube and scavenge, centrifugal and coolant pumps. Our worldwide customer base demands the highest quality, cost effective products for the most demanding commercial and military applications.

All World Machinery Supply offers high-quality, affordable pumps, motors, and power units from reputable brands like Daikin, Nachi, Eaton, Tokimec, NOP, Grundfos, Yuken, and Fuji . Our team of representatives and engineers can find or cross any pump/mortor to what you are looking for. We can even help you design a custom application suited to your fit your needs.

American Eagle Accessories Group is a manufacturer of truck equipment accessories. These products include: hydraulic-driven air compressors, drawer systems (tool storage), bolt bins (fastener and fitting storage), lube skids, lube trailers, fuel trailers, and utility construction trailers. All of our products are designed and manufactured in the U.S.A.

Founded in 1991, AZ Hydraulic Engineering manufactures high quality air-operated hydraulic pumps serving a broad clientele. We offer hydraulic piston pumps, power units, tank pumps and more with 25 different pressure ranges up to 50,000PSI and a proven track record for reliability and easy, low cost maintenance. AZ Hydraulics is the source for quality hydraulic pumps and friendly customer service.

Barbee Engineered Testing Systems is a manufacturer of hydraulic power units, hydraulic valve testers, air-driven hydraulic piston pumps, high pressure pumps, hydraulic power systems, high pressure systems and more. Our hydraulic pumps are available with up to 30,000 PSI. Check out our website.

Berendsen Fluid Power is one of the largest distributors of pneumatic and hydraulic products in North America. We distribute from quality manufacturers products such as hydraulic pumps, hydraulic motors, hydraulic gear pumps, mixer pumps and more. Visit our website for more information.

Bosch Rexroth is a global leader in manufacturing industrial hydraulics, including proportional and servo valves. Directional control, high response, flow control, pressure relief, pressure reducing, and servo valves name some of our products. Our rugged valves are a perfect fit your electrohydraulic control applications. A variety of models are available for your viewing on our website.

Brand Hydraulics is a leading designer and manufacturer of high-quality hydraulic valves including hydraulic directional control valves, hydraulic flow control valves, hydraulic relief valves, hydraulic selector valves, shuttle valves, pilot check valves, flow dividers and more. Brand also has a line of quality hand-operated hydraulic pumps. Premium hydraulics since 1956.

For 40 years, Bucher Hydraulics, Inc. has specialized in hydraulic systems, including products such as hydraulic motors and hydraulic power units. Applications include concrete pumps, forage wagons, harvesters, lifting devices, recycling machines, door openers, log splitters and many others.

A Cascon hydraulic pump is used in a wide range of OEM equipment market applications. Whether you"re in the aircraft & aerospace, chemical, gas turbine or industrial or mobile markets, our hydraulic pumps and specialty pumps will meet your requirements and provide solutions that an off-the-shelf pump cannot. Contact Cascon, Inc. today for more information!

CAT PUMPS specializes in high pressure pumps, reciprocating pumps, positive displacement pumps, plunger-piston pumps and we also manufacture hydraulic pumps and hydraulic power units. We are an industry-leader in customer service and quality triplex pump design and products.

CLYDEUNION Pumps is one of the world"s leading pump companies - a centre of excellence in Pump Technology, Hydraulic Design and Engineering. We are structured to provide a specific focus on each of our customer"s key markets as well as providing full global aftermarket support. CLYDEUNION Pumps incorporates an accumulation of over 300 years of engineering expertise.

We have over 55 years of experience in manufacturing hydraulic components. CROSS Manufacturing, Inc. distributes hydraulic filters, hydraulic cylinders, hydraulic gear pumps and hydraulic systems worldwide. Our hydraulic systems are used for automotive, agricultural, mining and construction purposes.

D&D Machine & Hydraulics Inc, located in Fort Myers, Florida, is a manufacturer of hydraulically driven, submersible pumping systems that serves the Agricultural, Construction, Industrial, Mining, Petroleum and Municipal markets worldwide. More than 45 years ago, D&D realized the unlimited potential of hydraulics. Since then, D&D has revolutionized the dewatering industry with a series of hydraulically driven pumps that provide the most technologically advanced and precisely engineered features available today. Specifically, D&D builds electric or diesel-driven Power Units and Axial Flow, Trash, Sludge, Slurry/Digester and Mixed Flow pump heads. The flow capacity of these pump heads range from 450gpm to 55,000gpm and heads of 250 feet are attainable. If a standard pump will not meet the performance needed for a special application, D&D’s wide range of specialty pumps can meet your individual requirement.

When the owners acquired D&D, it was a four-employee, custom machine shop that repaired pumps used by local farmers. Shortly thereafter, D&D began to manufacture hydraulic pumps for a local sales and rental company. In the 1980s, as the business grew, D&D began to sell to other customers throughout the country, eventually achieving global recognition.

Danfoss will drive your vehicle transmission to a new level of performance with our Danfoss piston pumps and motors. Designed for intelligent vehicle management systems, our range brings you closer to your goals for reduced fuel consumption and high operator comfort. We deliver components and systems for machine from 15 to 2500 horsepower.

We create hydraulic pumps that can be utilized for standard and specialized purposes. Our high pressure pumps can handle pressures from 3,000 to 15,000 psi with flows of 200 gpm. Our systems can also perform with various fluids including mineral-oils, low-lubricity fire-resistant fluids. We are dedicated to developing the most reliable hydraulic pumps!

Eaton Hydraulics designs, manufactures and markets a comprehensive line of reliable, efficient hydraulic systems and components including hydraulic motors, hydraulic power units and other hydraulic systems. We serve various markets and applications with our quality systems and accessories.

We offer and repair hydraulic pumps and hydraulic motors. As one of the biggest suppliers of hydraulic power units (original or replacement) and a worldwide distributor, we can ship anywhere in the world immediately. Our inventory of motors is immense and our sales staff has years of experience.

Welcome to the Florida Hydraulic Industrial web site. Browse our categories for hydraulic pumps, hydraulic cylinders, hydraulic and industrial hose, including a wide variety of pressure washer hose, all common hydraulic hose fittings.

Flowserve® is the world leading manufacturer of quality hydraulic pumps — air piston pumps, hydraulic water pumps, vane pumps, entire hydraulic systems, plus valve repair. Our products are used by many industries — chemical; hydrocarbon processing; oil and gas; power; water resources.

Fluid Power International provides expertise in hydraulic pump repair & replacement. We specialize in repairing & replacing metric pumps & motors for Japanese and German heavy machinery as well as hydraulic components for excavators. We will tear down and inspect your part with no obligation.

Established in 1978, Gator Pump manufactures high volume pumps for irrigation, flood control, liquid waste pumping and many other applications. Steel fabricated hydraulic pumps are offered in several different sizes and configurations including vertical pumps, floating pumps and trailer pumps as well as custom pumps operated on electric, diesel or hydraulics to suit clients" needs. Call us today!

We provide a number of different styles of air driven high pressure hydraulic pumps ranging from 100 PSI to 60,000 PSI. Here at High Pressure Technologies, LLC we take customer satisfaction very seriously which is why we can customize our products to match your requirements. It is our goal to exceed your expectations. Please visit our website or give us a call today to learn more information!

We started developing hydraulic drive submersible pumps in 1977. We can provide you with a hydraulic pump, hydraulic gear pump and hydraulic power unit to match. If a standard system doesn"t meet your needs, we can custom design one for you. We make our models in a variety of materials.

Since our beginning in 1947, Hydraulic Supply Company (HSC) has been dedicated to fulfilling customers’ needs. We are a full service distributor of fluid power products and services. We carry a selection of over 20,000 hydraulic, pneumatic and industrial products in stock from the most recognized brands in the industry. Our goal is to provide customers with a large selection of hydraulic, pneumatic and industrial products with the best professional services, right when you need them.

Made-to-order & made-to-last custom hydraulic pumps faster than you can expect from other companies. The widest selection of hydraulic gear pumps & piston pumps, plus stock replacement pumps ready for immediate shipment. Brands: Webster, Danfoss, Barnes, Haldex, Cessna, Eaton, Vickers, etc. Hydraulic.Net’s specialization is in short run special application gear pumps with little tooling expense.

Hydraulics International, Inc. (HII), headquartered in Chatsworth, California, U.S.A., is a leading manufacturer and supplier of integrated products, services and support to military forces, aviation and commercial industries, government agencies and prime contractors worldwide. Focused on defense and commercial technology, HII develops manufactures and supports a broad range of products and systems for over a hundred industries as well as mission critical and military sustainment requirements worldwide. HII is also recognized as a leading manufacturer and supplier of air, electric, hydraulic, & manual driven high-pressure products to Automotive, Airline & Aerospace, Cannabis, CNG, Defense, Fire-Health & Safety, Fluid Power, Fuel Cell Hydrogen, General Manufacturing, Laboratory, University & Research, Mining, Oil & Gas, Paintball, Plastics, Power & Energy, Recreational Sports Diving, Electronics and other industries. We produce 85% of our products internally, thus eliminating our dependency upon outside sources for quality, reliability, and expediency. Because of our self-sufficiency, we are able to maintain key competitive advantages that include faster response to engineering and design problems, and reliability of components critical to functionality.

Here at Hydreco we manufacture hydraulic solutions for a number of markets including: agricultural, municipal, construction, mining and transportation. Our company has an extensive history of engineering success. If you are unsure what hydraulic products are best for your task then just let one of our representatives know your application and we can handle the rest!

Over 50 years, Hydro Leduc has developed more than 100 patents because of our passion for innovation in the hydraulics field. We find solutions to our customers’ most complex and demanding applications for piston pumps, hydraulic motors, hydro-pneumatic accumulators and custom hydraulic components.

HYTORC developed the jet series pumps which are portable, heavy duty, light weight, high flow to withstand harsh environments. These air or electric driven Hydraulic Pumps are engineered for continuous, non-stop use in harsh environments. If used on Torque Tools, Jacks, Cutters, Presses or Bending equipment, their reliability is unmatched by any other Hydraulic Power Pack.

We are a distributor of hydraulic and pneumatic products such as hydraulic pumps, filters, motors, valves and more. Our manufacturers make hydraulic gear pumps, piston pumps and hydraulic pumps with aluminum or cast iron casings. We have been in business for 30 years and service all of our products.

Founded in 1971, Interface Devices is a world-class designer and manufacturer of air driven fluid pumps, hydraulic valves and custom engineered fluid power products. IDI proudly designs and manufactures all our products at our Milford, CT facility. As we continue to grow and develop it is our principle aim to provide quality in our designs and manufacturing while responding to customer needs.

Jones Hydraulic Service is a company dedicated to solving the needs of our customers. Jones Hydraulic Service is a leading supplier / vendor too many large and small corporations, and many independent contractors. Our customer service is a top priority. Whether customers are looking to Purchase, Rent or Repair hydraulic tooling or keep their workers safe with High Visibility Apparel or Mosquito Repellent we get the job done. Jones Hydraulic Service is proud to be serving the energy, marine, petrochemical, railroad, construction, foundation repair, pipeline and shipyard industries since 1977. Jones Hydraulic represents some of the world’s leading Hydraulic Tool & Equipment manufacturers that include SPX Power Team, SafeWay Hydraulics, Pell Hydrashear, TORC LLC, Eagle Pro, and more. Offering Hydraulic Tool & Equipment Sales, Service and Repair for 40 years.

Jones Hydraulic listened to its customers needs for industrial supplies and now stocks LED Work Lights, Safety Mats, Hand Held Power Tools, LED Flood Head Lamp, Spill Clean Up Supplies, Water Dams and more. Jones Hydraulic represents the leading industrial supply companies including PowerSmith, Genesis, Spill Tackle, Quick Dams Nite Ize and more.

Jones Hydraulic helps their customer create a safe and healthy work environment by providing safety products that include Personal Protective Equipment, Hi-Vis Clothing, First Aid Supplies, Mosquito and Insect Repellents, Eye Protection and Outdoor Protective Equipment. Jones Hydraulic represents some of the leading safety product manufacturers such as SAS Safety, GSS Safety, Sawyer, Southern Glove and more.

We recently opened a Safety Equipment & Hydraulic Tool Showroom. We welcome you to stop by and see some of the latest product offerings. Our Showroom is located at 5955 Armour Drive, Houston, TX 77020. We are proud of our 40 year history and look forward to serving our customers for many more years to come.

At Linde Hydraulics, we pride ourselves on our designing/manufacturing of high pressure pumps and the Linde Hydraulic Valve. Our hydraulic pumps have been a mainstay since 1970. Our pumps are used in agriculture and defense. A complete hydraulic system can be offered, along with motors that deliver reliable performance.

Our Maximator® air-driven hydraulic pumps deliver from 60 to 60,000 PSI and cycle automatically. The Maximator® pumps are used in our hydraulic power units. We can provide you with standard or customized high pressure pump power systems. Repair and refurnishing services also available.

Since 1941, Metro Hydraulic Jack Co. has been your single source for all your hydraulic needs. We represent a wide variety of material lift and equipment manufacturers and we sell only the best. Our products are designed to help improve the safety of your work environment and increase your productivity. We are proud to provide a wide selection of high-quality hydraulic lifting products to our customers. As a third-generation family-owned business, all of us at Metro Hydraulic Jack Co. pride ourselves on delivering the same high-quality hydraulic products and top-notch customer service as we have always been. Our knowledgeable sales staff are experts at specifying the right equipment to meet our customers’ requirements and needs. Our extensive list of hydraulic lifting products includes aerial lifts , dock lifts , pallet lifts, platform lifts , rotary lifts, scissor lifts, small hydraulic lifts, and hydraulic lift systems. Additionally, we supply cylinders, pumps, valves, hydraulic and air jacks, pullers, punches, lubrication equipment, and more. The manufacturers we represent, including Autoquip, ECOA, Lift Products, Inc., and Lift-rite, are the best in the industry and we are proud to offer their products.

Our engineering services include custom hydraulic and lube system design to meet our customers’ specifications, as well as other specialized services. We are a supplier to numerous industries, including automotive, construction, industrial, material handling, mobile, and railroad. You can find an impressive list of our customers on our website. Call or email us today to learn how we can service your hydraulic needs.

Our Hydraulics Division, headquartered in Greenwood Indiana, is a world-class manufacturer of pumps, valves, flow controls, hydraulic power units and other products. We are known not only for our product excellence but for our competitive pricing and the ready availability of our products when customers need them.

Sales, service and rental for all major brands of hydraulic pumps and other air, electric and hydraulic equipment. Hydraulic pump offerings include hand pumps, air pumps, electric pumps, gas pumps and intensifiers. Highly skilled at matching tool to application for hydraulic pumps and more.

Oilgear heavy-duty axial piston hydraulic pumps are built. Engineered with Oilgear’s advanced “hard-on-hard” rotating group and hydrodynamic bearing support on the cylinder barrel, our pumps provide longer operational life and optimal resistance to contamination. Available in a variety of frame sizes and control options, Oilgear offers just the right pump to fit your demanding needs.

Founded nearly 25 years ago, Panagon Systems has remained a trusted company producing hydraulic parts on demand for a number of shops, manufacturers and industries. The company, located in Macomb, Michigan, is the largest aftermarket hydraulic piston pump and parts manufacturer in North America, providing a vast variety of current and obsolete components. Panagon has the ability to produce a product from raw materials to a finished pump, assembled, tested, painted and shipped from our facility. Due to the phasing out of old products, customers usually find that the parts they need are no longer available, or that the delivery time is too long or the cost is too high. Panagon Systems attempts to fill the void OEM’s create by manufacturing the phased out, expensive, unavailable pumps, motors and transmissions, from companies like Vickers, Denison and Rexroth.

We manufacture hydraulic pumps, motors and parts for a variety of industrial and mobile applications. Our replacements are equivalent to the Eaton/Vickers line of PVH, PVQ, PVB, PVM, PVE, PFB, MFB, MFE, TA19, TA1919, TDV10 and TDV20 series units and Rexroth A10V series units.

In addition to supplying complete replacement piston pumps, Panagon also offers all replacement parts for all series units such as Rotating Groups, Shafts, Compensators, Yokes, Valve Blocks, Housings, Bearings, Seal Kits, Cylinder Blocks, Shoe Plates, Swash Plates, Piston Kits, Wafer Plates, Control Pistons, Control Rods, Bias Pistons, Bias Rods, Spacer Kits, Saddle Bearings, and more.

Parker"s Hydraulic Pump and Power Systems Division provides a broad selection of piston pumps, hydraulic motors and power units that help our customers meet their industrial and mobile application needs.

The Parker Pump & Motor Division specializes in gear pumps and motors used in a myriad of industries. With decades of experience, PMD provides the best products in the market, supplemented by best-in-class customer service, and the deepest knowledge in the industry.

Perfection Hydraulics manufactures, distributes, and services hydraulic cylinders, hydraulic pumps, hydraulic valves, hydraulic gear pumps, and other hydraulic components for heavy equipment. Our products provide you with the best value available for today’s dynamic industry. With our reputation for quality and reliability, you can rely on us for your heavy duty hydraulics needs.

Pierce Sales is a manufacturer and distributor of 12-volt hydraulic pumps, hydraulic hoses, hydraulic fittings, tie-rod cylinders and many more products. We offer professional installation services. We also have spare parts and provide repair services to get your equipment running as soon as possible.

Precision Fluid Power is a distributor of hydraulic pumps, including hydraulic vane pumps, hydraulic piston pumps and hydraulic gear pumps. We provide new hydraulic motors or we rebuild them, as well as hydraulic valves and hydraulic cylinders. We also offer hydraulic pump repair. Call us today.

Robeck Fluid Power is a leading manufacturer of hydraulic pumps and an assortment of lubrication equipment. Our products include aluminum structural framing, automation equipment, electronics, fluid conveyance equipment, hydraulic pumps, lubrication systems, and pneumatic products. We are a fully authorized distributor of Eaton, Charlynn, Hydro-line, Aeroquip, and Vickers products. Visit our website to learn more about our manufacturers or to speak with a sales representative.

Since 1978, we have been offering hydraulic pumps, motors, valves and cylinders with 100 years combined experience. We distribute hydraulic systems, and also do on-site machine shop repair services and rebuilding. Our quality hydraulic power units can be ordered around the clock for your convenience.

SC Hydraulic Engineering has been a leader in the design & manufacture of various air-powered hydraulic pumps, hydraulic piston pumps, hydraulic power units and systems plus hydraulic valves—relief, inline check, high pressure. We also have the ability to customize our products to fit your needs. In business since 1953, we work worldwide through distributors and manufacturers.

Since 1899, SIMPLEX products have been used by industries that need hydraulic and mechanical equipment and solutions. Our continuous duty hydraulic pumps are equipped for up to 5HP, as are our gas, air & electric hydraulic pumps for heavy-duty tooling applications. Our positioning and lifting products turn challenges into progress.

Established in 1979, Southwest Seal and Supply has grown to become one of the most predominant distributors of sealing, hydraulic hoses, fittings, couplings/connectors, gasketing and fluid control products in the Southwest. We offer a wide range of products including the best in selection, quality, and value-added services.

POWER TEAM is a world leader in hydraulic special service tools and equipment for motor vehicle and industrial markets, manufacturingprecision quality high-pressure hydraulic products, which include pumps,cylinders, valves, clamping components, related hydraulic accessoriesand special tools and equipment.

Stone Hydraulic Systems manufactures AC and DC hydraulic power units for a broad range of OEM applications such as auto hoists, dock levelers, hose crimpers, lift tables and compactors to name a few. Stone"s products provide a wide power range up to 5.5 horsepower.

SRS Crisafulli hydraulic-powered pumps handle industrial-strength pumping jobs: trash, mud, waste, raw sewage, sludge. Discharge sizes 2" to 24" and flows to 18,000 GPM. Standard Power Unit models in electric, diesel or gas, 32 to 180 horsepower, outputs from 18 to 119 GPM or custom built to your spec.

Sunfab was founded by Eric Sundin in the year of 1925. Sunfab develops, produces and sells components to operate hydraulic equipment within the area of mobile vehicles. After more than 90 years, the third generation of the Sundins are still running the company in the spirit of Eric Sundin, with a family atmosphere, flexibility and innovative solutions.

TK Trailer Parts is a dedicated manufacturer of high quality products. We are a turnkey supplier of hydraulic cylinders, hydraulic pumps, hydraulic valves, and much more. If you need assistance with find the right solution for you then feel free to reach out to one of our representatives.

Serving customers worldwide since 1911 with our innovative positive displacement pumping solutions, including custom designs. For even the toughest industrial, OEM & sanitary applications, we manufacture Vane Pumps, Internal & External Gear Pumps & more.

Willman Industries is a large, independent, jobbing foundry, located in Cedar Grove, Wisconsin. We produce all types of gray iron and ductile iron components, ranging from ounces to 40,000 lbs. Thin-walled exhaust manifolds, heavy-section hydraulic pumps, valves, housings, flywheels, clutch plates, machine tools, power generating equipment are typical of our product mix.

Zinko Hydraulic Jack is a leading manufacturer of high-quality hydraulic products. In addition to our namesake hydraulic jacks, we provide scissor jacks and aluminum jacks as well as hydraulic cylinders, lifts and other material handling equipment. At Zinko, your needs are met with a diverse inventory of quality hydraulic pumps including air pumps, hand pumps, electric hydraulic pumps and more.

Stanley hydraulic pumps exemplify the pure power of hydraulic tools. Our SM50 pump discharges an impressive 500 gallons per minute (1890 lpm) while it"s small size allows it to fit in a box 11 inches deep by 10 inches square (26.7 cm x 25.4 cm).

Rental Tools Online offers many types and sizes of portable hydraulic pumps from different manufacturers. If you are not sure which type of pump you need or what specifications are important, this may help.

Urethane bowls are very lightweight and can do a good job with clean, clear water. It is not recommended for water that has a lot of abrasives in it as these will eventually deteriorate the tolerances between the impeller and volute causing a reduction in performance. They are not as long lasting if used for pumps with potential solids, like trash or sewer pumps.

Iron has been used for pumps for well over 100 years. It is tough and unlikely to distort under different temperature and pressure conditions. It is also very abrasion and impact resistant and is ideal for sandy environments.

Similar to the volute, there are different materials employed for the impeller. In a centrifugal pump (which all these are) the impeller is the part of the pump that spins around inside the pump body, flinging the liquid from the center, outward towards the discharge port. It is important to select the right impeller material for the type of job at hand.

Urethaneimpellers are very good for the same types of conditions as urethane bowls: cool, clean, clear water. The water should be less than 100 degrees or so to avoid distoring the shape of the impeller. It is not recommended for pumping solds as these can cause the plastic to crack or break.

Stainless Steelis the ideal choice for salt water or other corrosive liquids. It is very stable under different temperatures and pressures, and will usually be unaffected by pumping smaller solids.

Some manufacturers claim to get much higher flow rates and head pressures from the same hydraulic oil input flow rates and pressures as other manufacturers. The equations are complex, but the idea is simple. It takes a certain amount of energy to move a volume of water to a particular height; it just does. The power going in to the pump has to be somewhat higher than that to compensate for friction loss, heat, and so on. There may be some efficiency improvements gained by impeller or volute design, but these are not normally as significant as some manufacturers claim. Beware of numbers that are too good to be true!

Let’s assume that you(or a client) is assigned to a task where you need to cut or drill through a pipe in a small and tight area with limited ability to operate. A usual task could be renovation of sewers or relining of a pipe. Specifically, for those kind of tasks the operator finds himself in a manhole where a sewage pump is needed to get rid of wastewater. It could also be after a floor grinding job, where there’s often created lot’s of slurry.

You’ll need an efficient submersible pump, which has the capacity to redirect slurry and wastewater, as well as being capable of handling solids such as rocks in order to keep the workplace clear. This might become a problem if the sieve inside the pump is not wide enough to transport the rocks. If that’s the case there will be complications, or worst case the pump will stop working, as solids get stuck inside.

The filter in Hycon’s Sewage pumps are built to handle solids that vary from ø38-74, so before choosing a pump you’ll have to consider the size of the solids in the area where you intent to use it. If you are already aware of the size of solids in your area, it should be straightforward to find a pump that suits your needs.

Moreover, you should also consider how much water you expect to move – our submersible pumps are able to transport between 35 m³/h and 120.000 m³/h pr. hour, which is more than enough for most applications.

Another great feature exclusive to hydraulic sewage pumps is the ability to automatically shut off when there is no water to redirect. Usually this is a much-appreciated feature when working in the city, near a highway or when a lot of tools are running simultaneously. You simply don’t have to keep an eye on the pump or worry about turning it off. Also referred to as priming. A hydraulic sewage pump like Hycon’s, does NOT need manual priming.

The HYCON HFD Oil Flow Divider replace the need for power packs and is perfect to drive all HYCON tools on worksites where there already is an hydraulic machine like a backhoe, skidsteer or mini excavator in place.

Simply connect the preset HFD to the Hydraulic Power Take Out (PTO) and you are assured correct flow, pressure and rotation on saws, pumps and other tools needed on the jobsite.

SONHO Pump is a professional pump manufacturer established in 1995. It is engaged in research and development of all kinds of submerged pumps, including submersible pump, stainless steel pump for sus316, high flow low head axial flow, slurry pump, aquaculture submersible pump, chemical sewage wastewater pump, animal husbandry sewage pump, large-caliber wastewater discharge station pump and a wide range of submersible pumps, and to promote around the world and passed ISO9001 certification, CNS Engineering With submersible pump qualified factory, TAF pump test water laboratory, pump quality reputation, be sure to welcome all inquiries.

Explore a wide variety of hydraulic pump underwater on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These hydraulic pump underwater are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these hydraulic pump underwater is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right hydraulic pump underwater for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of hydraulic pump underwater to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.