sunfab hydraulic pump parts pricelist

Sunfab is a world leader in hydraulics. Technologically advanced hydraulic pumps, motors and, in particular, the first mobile lifting crane all originated from technology used by Eric Sundin for ski production in Hudiksvall. Ever since its foundation in 1925, Sunfab has been a family company characterised by innovation, skills and visions of the future.

Our head office is located in Hudiksvall, Sweden, where Sunfab´s products are manufactured in the company´s own factory.Our subsidiary companies can be found in Germany, France, UK, Spain, USA and Malaysia. We also sell our products via distributors and direct to customers all over the world.

The company Sunfab can trace its roots back to Sundins Fabriker, a family company that was established as long ago as 1925 and, for many years, was a successful manufacturer of skis. The first crane was built in 1947 by HIAB, a separate company. As time went on, demands increased for greater capacity, and in 1954, a hydraulic pump was developed that laid the foundation for the future successes of the new company, Sunfab.

These days, Sunfab Hydraulics AB supplies companies with some of the world’s most sophisticated products in its niche market. Products that meet stringent quality, environmental and safety requirements and offer functional solutions.

Our hydraulic Pumps and Motors undergo stringent testing in our own lab and test rigs during production to ensure unsurpassed reliability in the field. Our state-of-the-art production facility employs only the most experienced NC operators and Service Technicians.

Environment and Quality Assurance 5 Pumps fixed single flow 8 Pumps fixed dual flow 22 Pumps variable flow 30 THE SOURCE OF HYDRAULIC POWER have only just started Sunfab develops, produces and sells piston pumps and motors for operating demanding hydraulic equipment in mobile applications. The company Sunfab can trace its roots back to Sundins Fabriker, a family company that was established as long ago as 1925 and, for many years, was a successful manufacturer of skis. A fleet of vehicles ensured reliable transportation of raw materials to the factory. Heavy, irrational loading and...

Our knowledge gives power to hydraulics A series of factors have accounted for Sunfab’s success in the market. Creative and innovative development and long-term work have been combined with stringent demands on environmental accountability, function, quality and components. Our ability to listen to the real needs of our customers provides the essential impulses for driving developments forward and creating new, improved products. The commitment, sense of responsibility and creativity of our employees are other key factors. We strive to make continual improvements in all areas of our...

Sunfab is your supplier of a wide range of hydraulic pumps. The pumps are optimised for all kinds of applications. We offer 12 different sizes in the range of 12-130 cm3 with pressure up to 400 bar. The range of fixed displacement dual flow pumps SCPD and SLPD comprises 9 different sizes from 20/20 cm3 up to 53/53 cm3. The SCP dual flow pumps are of bent-axis design, the SLPD pumps are of inline design with swash plate. Pumps fixed dual flow Pumps variable flow We offer variable pumps with a displacement of 62, 92, 112 and 130 cm3. An operating pressure of up to 450 bar, different kinds of...

SCP 012-108 DIN is a series of piston pumps with a fixed displacement for demanding mobile hydraulics. SCP 012-108 DIN covers the entire displacement range 12-108 cm3 ⁄rev. at a maximum operating pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. It is either mounted directly on the power take-off, or on a frame bracket via an intermediate shaft. Other advantages: High maximum speed while maintaining low noise levels Smooth operation over the entire speed range Long life due to...

SAP 040-064 DIN covers the displacement range 40-64 cm3 ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. The pump is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. Other advantages: Light weight metal casing design Smooth operation over the entire speed range Long life due to high demands on material selection, such as bearings, seals, etc Corrosian free light metal-housing Less heat generation due to better...

Nominal oil ow at pump speed SCP DIN Optimised is a series of piston pumps with a fixed displacement for demanding mobile hydraulics. Displacement Max pump speed: continuous intermittent Max operating pressure continuous intermittent Weight Tare-weight torque (M) Direction of rotation SCP 084, 108 DIN Optimised covers the displacement range 84 and 108 cm3 ⁄rev. at a maximum pressure of 400 bar. It is a modern, compact pump which meets the market’s high demands on flow performance, pressure, efficiency and small installation dimensions. It is either mounted directly on the power take-off or...

SCPT 090, 130 DIN is an addition to the SCP series that supports larger flows and pressure up to 300 bar. SCPT 090, 130 DIN are ideal for applications that require both a high flow and a high operating pressure in combination with demands on small installation measurements. The pumps are either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. Nominal oilspeed Max pump ow at pump speed continuous continuous Weight limited Max operating pressure continuous intermittent High maximum speed while maintaining low noise levels Smooth operation over the entire...

Pumps fixed single flow SCP DIN Optimised for Injector SCP DIN Optimised for Injector is an externally drained variant of the SCP series, which offers a very high oil flow in combination with the Sunfab injector K-Jet 2. SCP 084, 108 DIN Optimised for Injector is suitable for hydraulic motor operations in closed hydraulic systems with injector K-Jet 2 for pressurisation of the suction side. This gives excellent speed characteristics and high flows. The pump’s front shaft seals are manufactured from fluor rubber to withstand the higher temperatures involved with engine mounting. It is a...

The pump is either mounted directly on the power take-off or on a frame bracket via an intermediate shaft. The stop shoulder on the angular housing allows the pump’s direction of rotation to be changed without the risk of altering the gear meshing. Other advantages: High maximum speed while maintaining low noise levels Smooth operation over the entire speed range Long life due to high demands on material selection, such as bearings, seals, etc O-rings on all contact surfaces as well as double shaft seals eliminate oil leakage from the pump and power take-off For more information, technical...

SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cm3 ⁄rev. at a maximum pressure of 400 bar. The pump’s well dimensioned, double tapered roller bearings permit high shaft loads and lead to excellent speed characteristics. The pump is drained externally. It is speed-optimised and therefore supplied for either left (L) or right (R) rotation direction. Other advantages: High maximum speed while maintaining low noise levels Smooth operation over the entire speed range Long life...

• Sealing kit and hollow screw included in the scope of delivery. SunFab bypass is a relief valve to the SC pump for remote switching between idle and operation.

It is often used on vehicles equipped with hydraulic equipment that can be used during the journey, for example vehicles for road construction, concrete mixers, refuse vehicles, etc. the bypass valve is controlled from the driver"s cab and allows oil to be pumped to the vehicle"s hydraulic equipment if necessary.

The valve opens a connection between the pressure line and the suction line directly at the pump, so that the pump is relieved. Only a small amount of oil circulates through the existing system to cool the pump.

Trustworth Infracore Private Limited,establishes in the year of 2013in Bengaluru, Karnataka, (India) are the leading eading Wholesale Trader and Exporter of Hydraulic Pumps, Concrete Pump Spare Parts, Excavator Spare Parts, Hydraulic Pump Spares, Soil Compactor Spares and many more. We are also a Service Provider of Pump Repair Service. The main motive of our company is to provide goods of superior quality at affordable prices. In very mean time, we become pioneer in this domain among other which is only possible by our strong workers efforts. This ground requires technical innovative things which is essential for the firm to maintain in this place last long. Corporation has an ultra and high tech infrastructure which is placed in departments and units who help in producing goods in stipulated time and in huge to fulfill the demands. Many new tools are engaged in the sections for good flow of transitions without any type of hindrances and same is kept in the warehouse in customized way to protect from uncertainties. All the time there is the keeper to look after the products. With the high tech technologies and inventive thoughts, everything is done in appropriate way. Association laid necessary improvements for the sake of the consumers. In order to supply most adorable commodities many changes are made like the packaging quality is modify just for attracting more buyers and for safely delivery of them in mean time frame. Different modes of payments are held for their conveyance while they ordered them.

The company Sunfab can trace its roots back to Sundins Fabriker, a family company that was established as long ago as 1925 and, for many years, was a successful manufacturer of skis. The first crane was built in 1947 by HIAB, a separate company. As time went on, demands increased for greater capacity, and in 1954, a hydraulic pump was developed that laid the foundation for the future successes of the new company, Sunfab.

These days, Sunfab Hydraulics AB supplies companies with some of the world’s most sophisticated products in its niche market. Products that meet stringent quality, environmental and safety requirements and offer functional solutions.

Our hydraulic Pumps and Motors undergo stringent testing in our own lab and test rigs during production to ensure unsurpassed reliability in the field. Our state-of-the-art production facility employs only the most experienced NC operators and Service Technicians.

Rexroth, Commercial, Parker Denison, Sundstrand, Kawasaki, Staffa, Sauer Danfoss, Linde and Vickers are all registered trademarks. DOSCO Precision Hydraulics is not a licensee or affiliate of any of these corporations.

CHS - Centrum Hydrauliki Silowej in Tychy, is a completely new combined head office of leading companies in the field of hydraulics, belonging to the forefront of this branch in Europe.

With the combination of our common purposes and efforts, we have created perhaps the biggest in Poland and certainly belongs to the top in Europe distribution network of spare parts and components of hydraulics in one place. We focused in one place almost all of the leading manufacturers in this branch, and certainly all known and reputable manufacturers in the world.

We are german-polish trading and production company, some of the specializations that we offer are quality components of hydraulic pumps and motors for construction heavy equipments, marine and industrial applications. The spare parts to hydraulic pumps, motors, hydraulic transmissions, hydraulic hammers, gear boxes, transmissions and axles.

Some of the things that we can offer to you are spare parts and hydraulics units from the producers such as: REXROTH ( Bosch-Rexroth, Brueninghaus Hydromatik, Mannesmann Rexroth, Uchida Rexroth, Hydro-Gigant, Hägglunds ), MOOG, BOSCH, KAWASAKI, NACHI, VICKERS, EATON, CHAR-LYNN, SAUER - DANFOSS, SUNDSTRAND, DAIKIN, SAUER-BIBUS, LIEBHERR, PARKER, COMMERCIAL, DENISON, SALAMI, CASAPPA, POCLAIN, KAYABA, DAVID BROWN, HITACHI, O&K, BOMAG, MECALAC, NEW HOLLAND, DOOSAN, KUBOTA, HYUNDAI, KOBELCO, FURUKAWA, HALLA, JCB, VOLVO, CATERPILLAR – CAT, KOMATSU, TOSHIBA, SHIBAURA, SHW-TROCHOCENTRIC, BEINLICH, BUCHER, HAWE, SUNFAB, VELJAN, METARIS, HYDRAUT, TDZ, RSV ROTATOR, WEPUKO PAHNKE, THUMM, ROQUET, KRACHT, RAUH, ECKERLE, SCHWING, BREVINI, SAM, SAI, BONDIOLI PAVESI, HYDROCAR, OILGEAR, BONFIGLIOLI, MATBRO, HALDEX, COMER and others …

Transmissions, Gearboxes, Axles parts: LINDE, VOITH, DANA-CLARK, DANA-HURTH, ALLISON, CARRARO, KESSLER, ZF - ZAHNRAD FABRIK PASSAU and FRIEDRICHSHAFEN.

Besides of that, in our offer you will find spare parts for building machines (construction vehicles) such as: ATLAS, TEREX, LIEBHERR, HANOMAG, O&K, BOMAG.

Please remember, if you ask about spare parts please let us know always the type and series ( fabric) numbers- it means all data from the identification plate (name plate) of pumps, motors, transmissions, axles, gear boxes, hydraulic hammer or the catalogue numbers if you have them. It is necessary to avoid making any mistakes and to guarantee our professional service.