truck craft hydraulic pump manufacturer

TruckCraft was the first with an all aluminum pickup dump insert, the TC-120 ULTRA. We continue to innovate with our steel TC-101 MAGNUM. Boasting a 6,200 pound true lift capacity, the unit uses a front telescopic cylinder to get your load down low in your pickup bed for a safer center of gravity. The MAGNUM’s all 6061 T6 aluminum subframe cuts weight and never needs paint maintenance.

A new productivity tool from TruckCraft makes your pickup truck a working dump truck. If you’re scratching your head and wondering what the real differences in pickup dump inserts are, you should check out the features of TruckCraft’s TC-101 MAGNUM.

The big question – how much can it dump? Let’s face it, if it dumps wimpy it’s because it’s designed wimpy. The dump capacity of MAGNUM is 6,200 Lbs, and it is backed with a three year limited warranty, including the MONARCH power unit, to give you confidence it will dump 6,200 Lbs everyday, period. The muscle doing the heavy lifting is the U.S.A.- made three stage telescopic cylinder. It has premium chromed rod sections and aluminum glands with internal wear bands, premium components to be sure, and though you don’t see them, they are just two of the many designed-in reasons for long life and excellent performance of TruckCraft dump inserts.

On to the paint job; as you probably already know, preparation is everything in powder coating. That’s why we first grit-blast the tub and tailgate to clean and mechanically etch the steel for good primer adhesion. After that, they’re coated with zinc-rich primer prior to powder-coating. Then comes the final baked-on powder coat application. The result is a durable, long-lasting finish that looks good and protects your investment. Chemical dipping or solvent-wiping are common powder coat prep processes, but only grit-blast prep earns the right to wear the TruckCraft logo.

The MAGNUM’s weight-saving aluminum subframe is another reason why TruckCraft inserts are a cut above other dump inserts on the market today. The extruded T6 alloy subframe has TruckCraft’s standard two-bolt installation system built in so there are no extra mounting clamps or holes in your truck bed required for mounting. Advantages of T6 are that it has the same tensile strength as steel, so it is half steel’s weight, but equal in strength, and is rust-free with no maintenance required. The T6 subframe is just one of the weight-saving components resulting in MAGNUM’s best-in-class 600 Lb. weight.

MAGNUM is designed to be virtually maintenance-free.  All five pivot points (two dump hinges and three cylinder pivots) have premium lubed-for-life bushings installed so there is no “grease” maintenance needed. In fact, an occasional washing, checking the hydraulic fluid level twice a year, and inspecting daily for debris or damage is all the maintenance MAGNUM ever needs to be dependable and well-groomed.

3-Stage Telescopic Lift and Cab Protector - The ULTRA hoist system utilizes a heavy duty, three stage, telescopic cylinder with chromed rod sections. The hoist has been custom designed by TruckCraft to lift 7,000 lbs. to a 47 degree dump angle in just 18 seconds. The aerodynamic cab protector (shown) provides low wind resistance and great visiblity. The cab protector and a full tarp system are options that can be easily added to the TC-120 at any time.

Power Unit and Standard Remote Dump Control - A compact, one-piece power unit is mounted directly behind the cab in close proximity to the hoist. The remote control buttons activate the motor/hydraulic pump from within the cab or up to 12" away from the cab. One 12 volt battery cable is the only electrical connection required.

If you’re scratching your head and wondering what the real differences in pickup dump inserts are, you should check out the features of TruckCraft’s...more

The body and frame are designed and constructed entirely of aluminum and stainless steel to provide durability and resistance to rust and corrosion. TruckCraft’s innovative...more

TC-160 LIGHTNING 12V ELECTRIC UNDER TAILGATE SPREADER. All TruckCraft spreaders carry a two year limited factory warranty. Made of tough, corrosion resistant 6061 T6 Aluminum alloy and stainless steel you get the best of both worlds, weight savings and extreme durability in high-salt conditions....more

TruckCraft’s TC-140 D-ICER PLUS tailgate replacement spreader for one-tons requires no hydraulic system and is easy to install.Handles any free-flowing material up to 3/4″ diameter

TruckCraft’s TC-131 D-ICER is a premier spreader made entirely of aluminum and stainless steel. The system is designed to fit our TC-121 Ultra Aluminum Pickup Dump Inserts . The TC-131 is made of marine grade* aluminum and stainless steel, so is non-rusting and provides low maintenance and...more

We specialize in work truck parts and accessories. We stock parts for many of the major manufacturers of work truck equipment including cranes, winches, lubrication systems, hydraulic systems, valves, pumps, electrical parts and switches, cable, rigging, and more. We sell and install PTO"s from Chelsea and Muncie. We source parts from many manufacturers and distributors. Let our experienced staff find you that hard to find part.

We are an authorized distributor for Gates hoses and couplings. We stock the most common hoses couplings for truck hydraulic systems and we can order or make most hoses. Bring in your hose or dimensions and we will make one up in a timely manner.

We also sell many types of truck accessories. Our diverse product line includes truck boxes, LED strobes, beacons, cabinet and work lights, shelving, tool drawer sets, bolt bins, racks, tanks, reels, hoses, vices, and much more to best set up your truck or fleet for ergonomics, efficiency, and safety.

TruckCraft was the first with an all aluminum pickup dump insert, the TC-120 ULTRA. We were first to offer a three-year warranty and first with a 150 amp resettable circuit breaker standard in every wiring harness. There are no grease points on any of our dumpers because they are designed to use no-lube nylon bearings at every pivot point. We continue to innovate with our steel TC-101 MAGNUM, Providing a 6,200 pound true lift capacity. The unit uses a 3-stage front telescopic cylinder to get your load down low in your pickup bed for a safer center of gravity. The MAGNUM’s all 6061 T6 aluminum subframe cuts weight and never needs paint maintenance.

TruckCraft’s D-ICER product line offers quick install 12-volt electric spreaders made entirely of aluminum and stainless steel to fit your application, from pickup truck dumpers to 19,500 pound capacity chassis one-tons with dumping capability. With no expensive clutch or PTO pumps to install, D-ICERs connect right to your truck battery with no modifications. All D-ICERs come complete with a heavy wiring harness, U.S.A. made in-cab digital control, all mounting hardware, backed by a two-year factory warranty.

TruckCraft’s TC-131 D-ICER is a premier spreader made entirely of aluminum and stainless steel. The system is designed to fit our TC-121 Ultra Aluminum Pickup Dump Inserts and, with adapters, can fit any brand of pickup dumper. The TC-131 is made of marine grade* aluminum and stainless steel, so is non-rusting and provides low maintenance and operational costs. *All aluminum used by TruckCraft is 6061 T6 or 5052- H32, classed as grade A or B by the Aluminum Association Standard. Grades A and B are recommended for use unprotected in industrial or seacoast structures.

TC-160 LIGHTNING 12V ELECTRIC UNDERTAILGATE SPREADER. All TruckCraft spreaders carry a two year factory warranty. Made of tough, corrosion resistant, 6061 T6 Aluminum alloy and stainless steel, you get the best of both worlds, weight savings and extreme durability in high-salt conditions. Check out innovative designs by TruckCraft, such as the completely enclosed 90 degree-angled gear reducer on the SPINNER DRIVE. It not only provides maximum road clearance by positioning the motor up, horizontally, but the 2:1 gear reduction doubles torque, allowing you to slow the spinner down without sacrificing torque. Heavy, factory assembled wiring harnesses carry power from the USA-made Electronic Control Unit to the enclosed, LEESON Wash-Down-Grade motors, made with type 304 stainless shafts, double seals, epoxy coating, and sealed housings. It doesn’t get any beefier than this.

TruckCraft’s new LANCER is a green-focused aluminum service body available for Single or Dual wheel pickup chassis that will save fuel every driven mile while providing years of secure storage. The deck floor and understructure are made from custom-designed aluminum alloy extrusion with tensile strength equivalent to steel for real durability, but weighing in at only 640 lbs(SRW), 840 lbs(DRW). That’s about what your pickup box weighs now. Combine classy powder-coated cabinet doors, the near-zero maintenance of aluminum, stainless steel hardware and you get TruckCraft’s great fuel saving service body that can be moved on to your next truck.

The details of the Single or Dual wheel LANCER are where the value of this new TruckCraft-designed body really shines through. Compare the welded double panel door construction, stainless steel door hinges, the black and chrome twist lock T handles, bright diamond plate cabinet tops and adjustable cabinet shelving, and we believe you’ll see greater value than in any other comparably priced service body. How about these additional features – single handle top-drop/slam-shut tailgate, gas springs on vertical doors, rubber mounted LED lights with factory wiring harness, D-bulb style rubber door weatherseal, and a five year factory warranty. Mounting hardware is included for certain box-delete single rear wheel pickups. *NOW AVAILABLE WITH REMOTE KEYLESS ENTRY & INTERNAL LIGHTING!

Never sandblast or re-paint your one-ton steel dump body again to try to get another few years out of it. The new ZEUS will stay looking sharp with little maintenance, and you will be able to move it to a new chassis someday without having it crumble apart because of all-too-familiar cancer rust. Saltwater boats, aircraft and automotive applications have demonstrated time and again that if selected properly, aluminum will withstand saltwater and moisture corrosion much better than steel without costly paint maintenance. According to The Aluminum Association’s website, www.aluminum.org , “Automotive and light truck applications accounted for almost 6 billion pounds of aluminum shipments in 2006.” That’s a lot of rolling aluminum, and TruckCraft knows how to design and build rugged and durable products using aluminum!

If clean design and well executed workmanship, rugged but easy-to-use controls and latches, 500 lb weight savings over steel, and maintenance free appearance are things you want, see the ZEUS all-aluminum body at your local TruckCraft dealer today.

Available models include heavy duty flats(200 lb/sf load rating), extra heavy duty flats(350 lb/sf load rating), dumping, towing, and specialty flats. In the Dumping Aluminum Flats section see our Reversed-Hoist dumping flat with a 17,000 lb hoist capacity plus a 30,000 pound tow-capacity gooseneck ball factory installed . All TruckCraft flats are made of 100% 6061 T6 alloy extrusion in a proven design that gets more strength and rigidity per pound of aluminum than even many steel flatbeds (but at just 60% of the weight). Sizes and capacities are available for pickup trucks, up to 19,500 pound capacity one-tons.

Heavy duty or extra heavy duty aluminum flats, factory assembled on a pre-painted subframe, complete with a double-acting MONARCH® power unit and all hardware required for quick installation. Available in sizes to fit pickup trucks, up to body lengths of 14’-2” long for 120″ C.A.’s. Dump capacities from 9,500 lb to 17,000 lb.

Combination bodies provide the best of two worlds: the secure storage of service bodies, and the extreme usefulness of dump bodies. TruckCraft offers two models of COMBO bodies: An A60-galvanneal steel model capable of dumping 12,000 lbs with 64 cu ft of storage for chassis-cabs, and an all-aluminum model with 7,000 lb dump capacity and 35 cu. ft of storage for single-rear-wheel pickups.

TruckCraft manufactures a line of premium, all aluminum storage compartments for behind-the-cab installation. Commercial contractors, municipalities, landscapers or anyone needing secure vehicle storage and transport of tools and materials will benefit from our truck storage compartments. The weight saving aluminum design doesn’t require paint maintenance to retain lasting good looks. Compartments are available to cover the entire back of the cab and window or shorter styles can remain below the vehicle rear window.

Hydro-Craft has been the leading manufacturer of hydraulic reservoirs and accessories for over 60 years. Excellent service and high quality have been a part of the Hydro-Craft package from the start, meeting the hydraulic needs of many diverse industries and applications.