truck craft hydraulic pump in stock

TruckCraft was the first with an all aluminum pickup dump insert, the TC-120 ULTRA. We continue to innovate with our steel TC-101 MAGNUM. Boasting a 6,200 pound true lift capacity, the unit uses a front telescopic cylinder to get your load down low in your pickup bed for a safer center of gravity. The MAGNUM’s all 6061 T6 aluminum subframe cuts weight and never needs paint maintenance.

A new productivity tool from TruckCraft makes your pickup truck a working dump truck. If you’re scratching your head and wondering what the real differences in pickup dump inserts are, you should check out the features of TruckCraft’s TC-101 MAGNUM.

The big question – how much can it dump? Let’s face it, if it dumps wimpy it’s because it’s designed wimpy. The dump capacity of MAGNUM is 6,200 Lbs, and it is backed with a three year limited warranty, including the MONARCH power unit, to give you confidence it will dump 6,200 Lbs everyday, period. The muscle doing the heavy lifting is the U.S.A.- made three stage telescopic cylinder. It has premium chromed rod sections and aluminum glands with internal wear bands, premium components to be sure, and though you don’t see them, they are just two of the many designed-in reasons for long life and excellent performance of TruckCraft dump inserts.

On to the paint job; as you probably already know, preparation is everything in powder coating. That’s why we first grit-blast the tub and tailgate to clean and mechanically etch the steel for good primer adhesion. After that, they’re coated with zinc-rich primer prior to powder-coating. Then comes the final baked-on powder coat application. The result is a durable, long-lasting finish that looks good and protects your investment. Chemical dipping or solvent-wiping are common powder coat prep processes, but only grit-blast prep earns the right to wear the TruckCraft logo.

The MAGNUM’s weight-saving aluminum subframe is another reason why TruckCraft inserts are a cut above other dump inserts on the market today. The extruded T6 alloy subframe has TruckCraft’s standard two-bolt installation system built in so there are no extra mounting clamps or holes in your truck bed required for mounting. Advantages of T6 are that it has the same tensile strength as steel, so it is half steel’s weight, but equal in strength, and is rust-free with no maintenance required. The T6 subframe is just one of the weight-saving components resulting in MAGNUM’s best-in-class 600 Lb. weight.

MAGNUM is designed to be virtually maintenance-free.  All five pivot points (two dump hinges and three cylinder pivots) have premium lubed-for-life bushings installed so there is no “grease” maintenance needed. In fact, an occasional washing, checking the hydraulic fluid level twice a year, and inspecting daily for debris or damage is all the maintenance MAGNUM ever needs to be dependable and well-groomed.

This hydraulic pump is a double-acting power unit for both lifting and lowering. It has a 6-quart sturdy plastic reservoir and is designed with a 12V DC motor that can provide strong power for hydraulic systems like dump trailers, forklifts, lifting platforms, etc.

This double-acting hydraulic power unit has a 12V DC motor (Power:1.6-3.0kw) and a 6-quart plastic reservoir; it has SAE#6 ports with 3200 PSI max relief setting on A and 1500 PSI on B port. The flow rate is 2GPM. Rated speed: 2850 r/min.

Our hydraulic electric pump has been fully assembled. It comes with a hand-held remote control and 2 additional SAE#6 connectors for replacement. The whole power unit is easy to wire and easy to operate.

With the powerful 12V DC electric motor, our hydraulic pump for dump trailers can start rapidly and provide quick oil output. In addition, it can provide strong power that will lift heavy objects in a short period.

You can rely on the quality of this electric hydraulic pump as it is made of special-treated sturdy plastic, and the whole structure has been reinforced. It is also equipped with a powerful electric motor that you can use as often as you like.

All of our 12-volt hydraulic power units have been pre-assembled before delivery, and we provide instructions for operation so that you can install and use the hydraulic pump easily. Horizontal mount is recommended.

As a great power unit, this hydraulic pump can be used for many things, such as truck tailgate lift, RV leveling, scissor lift, dump trailers, lift truck, snowplow, aerial platform, road signs, material handling, wheelchair lifts, etc.

Aside from being a smart business investment, truck upkeep is also a prudent safety precaution. Breakdowns and even accidents can sometimes be avoided if regular maintenance procedures are followed. While the upkeep of a commercial rig can seem daunting, here are some of the most common services that may be needed to keep your truck in top shape.

Hydraulic system failure frequently results in a gradual or abrupt loss of pressure or flow and a loss of power. Any of the system’s components can malfunction, leading to these issues. Levan Machine and Truck Equipment has years of hydraulic system troubleshooting experience and is ready to assist if a breakdown occurs.

Cylinder and OTC testing can identify whether or not a hydraulic component has been correctly constructed and installed. These tests demonstrate that the design and manufacturing procedures for hydraulic parts meet or surpass the standards for their expected use. If you have questions about the quality of your hydraulic parts or their installation, Levan Machine and Truck Equipment can complete cylinder and OTC testing services to check the health of your vehicle and systems.

For all of your hydraulic pump needs, Levan Machine and Truck Equipment has a large variety of pump and motor components. Our highly experienced staff can overhaul and rebuild all brands and models of low and high-pressure hydraulic pumps and motors.

If you suspect a problem with your hydraulic cylinder, contact our repair department immediately and let our highly-trained team provide you with expert-level assistance. Our skilled staff can dismantle, troubleshoot, and repair your hydraulic cylinder. If necessary, we can also rebuild your cylinder to ensure it is operating optimally and fully functional.

Dump Trailer with a Premium Supply Hydraulic Scissor Hoist Kit and Hydraulic Jack Kit, Shares one KTI Hydraulic Pump. Available at www.johnsontrailerparts.com

If you’re scratching your head and wondering what the real differences in pickup dump inserts are, you should check out the features of TruckCraft’s...more

The body and frame are designed and constructed entirely of aluminum and stainless steel to provide durability and resistance to rust and corrosion. TruckCraft’s innovative...more

TC-160 LIGHTNING 12V ELECTRIC UNDER TAILGATE SPREADER. All TruckCraft spreaders carry a two year limited factory warranty. Made of tough, corrosion resistant 6061 T6 Aluminum alloy and stainless steel you get the best of both worlds, weight savings and extreme durability in high-salt conditions....more

TruckCraft’s TC-140 D-ICER PLUS tailgate replacement spreader for one-tons requires no hydraulic system and is easy to install.Handles any free-flowing material up to 3/4″ diameter

TruckCraft’s TC-131 D-ICER is a premier spreader made entirely of aluminum and stainless steel. The system is designed to fit our TC-121 Ultra Aluminum Pickup Dump Inserts . The TC-131 is made of marine grade* aluminum and stainless steel, so is non-rusting and provides low maintenance and...more