ultra high pressure hydraulic pump price

The Enerpac P-2282 ultra high-pressure hydraulic hand pump is for lifting, bolting, or applying pressure in intermittent and non-repetitive construction, manufacturing, and maintenance and repair applications. The hand pump can advance and retract a single-acting cylinder or power a hydraulic tool (sold separately) and can hold a load. This pump does not have an internal pressure relief valve and must be used at all times with a pressure gauge (sold separately). Its large release knob controls pressure release. This two-speed pump is for applications where there is little or no load initially, but where increased force is needed when the load is applied. When no load is present, the pump operates in the first stage, which has a faster flow rate. When the pump senses a load, it switches to the second stage, which requires fewer handle strokes and slows the flow rate to produce more pressure and move the load. The pump has a 3/4" Unified National Fine Thread (UNF) cone thread port for connecting to a hose or gauge (sold separately).

SpecificationsPressure, first stage 200 pounds per square inch (psi) Pressure, second stage 40,000 psi Oil displacement, per stroke, first stage 0.99 cubic in. Oil displacement, per stroke, second stage 0.037 cubic in. Usable oil capacity 60 cubic in. Maximum handle effort 106 lb. Weight 14 lb. Dimensions 9 x 22 x 4.74 inches (H x W x D)

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from back to front.

Hydraulic pumps lift, bolt, or apply pressure to objects by pressurizing and moving hydraulic fluid. A hydraulic pump consists of a base, a reservoir that holds hydraulic fluid, and an operating mechanism, such as a handle or foot pedal, an electric motor, compressed air, or a gasoline engine. When the operating mechanism is activated, pressurized hydraulic fluid from the reservoir is delivered through an attached hose to a hydraulic cylinder. The pressurized hydraulic fluid in the cylinder lifts the cylinder’s piston, which in turn lifts the load. Hydraulic hand pumps are usually made of steel, or aluminum and nylon, and can be single-speed or two-speed. They are used in a wide range of applications, such as construction, manufacturing, and maintenance and repair applications in both industrial and home settings.

Enerpac manufactures industrial hydraulic equipment for lifting, workholding, and other applications, and provides integrated lifting solutions for bridge construction, mining, shipbuilding, and other industries. The company, founded in 1959, is headquartered in Menominee Falls, WI.

This hydraulic pump"s reservoir features over-pressurisation protection and an internal pressure relief valve for protecting the unit in case of excess pressure accumulation.

There are three types of ultra high pressure pumps, such as an electric compressor, air, and air compressor pumps because they are smaller than the mini compressor, such as air compressor pumps. They are cheaper and require less maintenance compared to other types of ultra high pressure hydraulic pumps, such as piston compressor pumps, and air compressor pumps are cheaper than the regular piston pumps.

Ultra high pressure hydraulic equipment is ideal for two-stroke applications. They are available in a variety of sizes, such as ultra-pressure hydraulic equipment, which is ideal for two-stroke applications. One is the iston piston hydraulic option, which is one of the two basic types of ultra high pressure hydraulic equipment such as a mini piston hydraulic pump, or ultra high pressure piston hydraulic equipment, is suitable for two-stroke applications.

Air operated hydraulic pumps provide the high-pressure hydraulic oil to pressurize hydraulic stud tensioners and hydraulic nuts. The pressure gauges on the hydraulic pumps are stainless stell and are glycerin filled. The pressure pumps have also been fully calibrated and come with a Calibration Certificate.

1600 3000 4000 bar hand pumps – very high pressure hydraulic hand pumps produced in light aluminum alloy of aeronautical derivation to reduce as much as possible the weight. Available in 3 versions with maximum operating pressure:

Equipped with an ergonomic bypass hand wheel in techno polymer for controlled pressure relief, with integrated pressure gauge connection that allows direct mounting of the measuring instrument with 45 ° inclination for a correct reading and lever locking system for easy and better portability. Oil filler cap with integrated breather. Sturdy feet with holes for attachment to machinery or structures.

Design studied to have high performances maintaining an optimal effort on the lever, a reduced weight and an excellent ergonomics. Robust hand pumps – heavy duty – with long maintenance intervals. Surface treatments to guarantee total reliability in the most difficult environments and maximum durability.

Tank capacity from 1,6 to 2 liters. Possibility of mounting manometric sockets, various types of quick couplings, high pressure flexible hoses. For a more accurate reading, the digital pressure gauge supplied with quick couplers is also available. The hand pump can be calibrated to different pressures upon customer request.

Hydraulic mineral oil operating fluid, models available on request with different fluids such as: water, glycol, glycerin, phosphoric esters. Custom made versions available for extreme operating temperatures.

Possibility to design and produce special 1600 3000 4000 bar hand pumps on request, with flow rates, performance and dedicated features. Available in stainless steel, with special fire painted colors and layouts designed and manufactured to customer specifications.

The K7VG series of high-pressure swash plate type pumps was developed for general industrial machinery use. The adoption of the high-load bearings and friction-free contacting ...

Gear pump with reversible Rotation direction and internal drainage. Built in aluminium body, lighter than casting pumps, permits to work at high pressures with a low level of noise.

... splayed, which guarantees steady working with no risk of tipping. The pump is working with a maximum operating pressure of 700 bar. Along with the SKP-1 and the foot pump, a 2,8m high ...

With their unique design, PA-PAC pumps offer a robust and durable solution to the high pressure needs of truck applications. Combining the automatic dual direction of rotation, high ...

The EPA series hand pumps are compact and easy to carry around the job site. To get the job done faster, these powerful dual speed pumps offer some of the best flow ...

... The HP-REMOTE pump, like all the HP Series pumps, can be installed in any hydraulic applications which requires high working pressures and moderate and ...

... HP-LEVER pump of the HP Series is a single-acting air-hydraulic pump with manual operation with an ergonomic lever. It has an oil flow rate of 2.4 to 0.1 l / min and ...

... operated pump range offers a choice of single or two speed operation and all models are supplied complete with a pre-filled oil reservoir, ready for immediate use. All models have a maximum working pressure ...

... result of the special gear profile that Bucher uses, QX pumps achieve extremely low levels of pulsation and noise emission, even at high pressures and speeds. Thanks to the wide range ...

... gear micropumps, ¡heir operating features and hew to select the right pump for the required application. Miaopumps are small hydraulic machines converting mechanical pcwer into hydraulic ...

... Team PUA/PMA series pumps provide infinitely variable capacity and discharge pressure. Suitable for continuous start/stop applications Pumps oil, water, and other fluids Stainless steel ...

Compact, Portable, Cordless Hydraulic Pump for MRO Applications. Compact, Li-ion 18VDC, 9.0 Ah battery-powered pump provides extended run-time. Two-stage, high-pressure ...

... The vertical design gives the new hydraulic pump - ITH Hydro-DAX V-series their name because it leads to the best weight-to-power ratio in the market

The pumps with open circuit and inverse piston technology are design especially for high pressure applications and impress with their large swing angle as well as a high ...

Whatever your high-pressure pump needs are, speed, control, intermittent or heavy-duty performance, you can be sure that Enerpac has a hydraulic power unit to suit the application. Featuring Hand, Battery, Electric, Air, and Gasoline powered models, with multiple reservoir and valve configurations, Enerpac offers the most comprehensive high-pressure pump line available. From hand pumps to air-driven & hydraulic pumps, Northern Hydraulics carries the Enerpac equipment you need. Find the perfect high-pressure model here.

A. There are multiple reasons this could happen so you will have to check on a couple things first make sure your oil level in your pumps reservoir is to the proper level. Check that your release valve is closed. Double check that your couplers on all connection points are tight and not leaking. Make sure that your not trying to lift anything above your cylinders tonnage rating. You may have air trapped in your system reference your instructions on proper air bleeding. Check for damage to the cylinder because your plunger could be binding which will need to be serviced by a qualified hydraulic technician or possibly replaced.

A. It may be a leaking connection so check that all your connections are tight and leak free. Its possible that you have a internal leak in the pump that you would need to have serviced by a qualified hydraulic technician. Check seals to see if you have any external leaks and if you find one you can get your equipment serviced by a qualified hydraulic technician.

A.First check that your release valve is open. Make sure that your pump reservoir is not over-filled and if it is drain oil level to the full mark. Check that all your hydraulic couplers are fully tightened. It is possible that you have air trapped in your system follow your instructions on bleeding air from your system. Your hose inside diameter could be too narrow for the system that you are using. It could be that you have a broken retraction spring or other damage to your cylinder which will need to be serviced by a qualified hydraulic technician.

Distributor of standard & custom pumps including constant, high & ultra high pressure triplex pumps. Types of pumps include sump, centrifugal, condensate, dosing, effluent, fire, roof tank fill, sewerage grinder, vacuum, vertical suspended sewage, submersible, vertical turbine & wastewater pumps. Pumps are available in caste iron, bronze, stainless steel, plastic & fiberglass materials & in different sizes, styles & specifications. Services include consulting & designing, field surveying, start-up & technical assistance, infrared & laser alignment, vibration analysis, systems integration, trouble shooting & emergency & tailored repairs. Markets served include hospitals, pharmaceutical labs, municipalities, government, military, complexes, schools, airports & industrial.