variable pressure hydraulic pump supplier

The displacement of a pump is defined by the volume of fluid that the gears, vanes or pistons will pump in one rotation. If a pump has a capacity of 30 cm3, it should treat 30 ml of fluid in one rotation.

In axial piston variable pumps, the flow is proportional to the drive speed and the displacement. The flow can be steplessly changed by adjusting the swivel angle. Axial piston variable ...

... axial piston pump type V60N is designed for open circuits in mobile hydraulics and operate according to the swash plate principle. They are available with the option of a thru-shaft for operating additional ...

Variable displacement axial piston pumps operate according to the bent axis principle. They adjust the geometric output volume from maximum to zero. As a result they vary the flow rate ...

... piston pump type V30D is designed for open circuits in industrial hydraulics and operate according to the swash plate principle. They are available with the option of a thru-shaft for operating additional ...

... circuit axial piston pumps are used as hydrostatic transmission components in self-propelled machines and for rotary drives in both fixed and mobile equipment of all kinds.

Axial piston twin flow pump. With a very high performance in all job conditions. Due to its twin flow configuration this pump allows a great variety of solutions in different job applications.

Air hydraulic pump, double pneumatic motor, double effect, foot operated with lock-up function, lever distributor valve (4/3), 10L tank, oil flow 8.5 / 0.26 l / min

... customer system options for mechanical, hydraulic and electric input solutions are available. Further special regulating features like torque control and pressure cut-off are also available. The reliable ...

... needs of truck hydraulics, the TXV variable displacement pumps with LS (Load Sensing) control allow flow regulation to suit the application requirements. The pump ...

... rev. displacements, these pumps are designed to operate in both directions of rotation (clockwise or counter-clockwise). Only one reference regardless of direction of rotation. The TXV indexable pumps ...

... PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design ...

Variable displacement pumps in closed loop; 3 basic design units and 8 max. displacement sizes of 14, 18, 21, 28, 35, 46, 56, 64 cc/rev; various control options; max. ...

Compact Design, Economical Conception. High Power Density, High Overall Efficiency, High Rotating Speeds. High Output Pressure. Simple Change of Direction of Rotation, For Industrial & Mobile Market. Splined or Keyed ...

Parker P2/P3 High Pressure Axial Piston Pumps are variable displacement, swashplate piston pumps designed for operation in open circuit, mobile hydraulic ...

... Series pump offers variable displacement axial piston pumps for open-circuit applications. Featuring a compact footprint and continuous operating pressure ...

Designed for power and speed, the Oilgear PVV open-loop axial-piston hydraulic pumps can handle large, heavy-duty systems. Manufactured with advanced engineering and computer-optimized, the PVV pump range delivers up to 450 Bar / 560 horespower which equates to four times the horsepower at less than half the cost of other manufacturers pumps.

With it"s compact design available in several displacements, the PVV pumps offer a large selection of readily interchangeable controls. With improved response controls and reduced noise levels, its rugged cylinder design enhances performance.

The patented, pressure lubricated swashblock design offers high performance for high-cycling operations. It also contributes to the pump’s ability to run on low-viscosity fluids, including high water content, fire-resistant and other special fluids.

Zeus Hydratech fully supports the Oilgear PVV pump product line and is the only valid source for OEM parts. All Oilgear repairs are machined and tested per our original factory specifications.

Designed for power and speed, the Oilgear PVV open-loop axial-piston hydraulic pumps can handle large, heavy-duty systems. Manufactured with advanced engineering and computer-optimized, the PVV pump range delivers up to 450 Bar / 560 horespower which equates to four times the horsepower at less than half the cost of other manufacturers pumps.

With it"s compact design available in several displacements (200-540cc/rev), the PVV pumps offer a large selection of readily interchangeable controls. With improved response controls and reduced noise levels, its rugged cylinder design enhances performance.

The patented, pressure lubricated swashblock design offers high performance for high-cycling operations. It also contributes to the pump’s ability to run on low-viscosity fluids, including high water content, fire-resistant and other special fluids.

Zeus Hydratech fully supports the PVV pump product line and is the only valid source for OEM parts. All Oilgear repairs are machined and tested per our original factory specifications.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

With fast control response and superior performance, the PVG is a variable-displacement axial-piston pump designed to take on your most demanding applications. It offers high-pressure, superior performance in a compact design — while thriving on low-viscosity fluids.

When you need peak performance from a variable-displacement axial-piston pump, the Oilgear pump PVV line is ready. No matter what pressure and flow demands you face, these pumps rise to the challenge.

When you need peak performance from a variable-displacement axial-piston pump, the Oilgear pump PVV line is ready. No matter what pressure and flow demands you face, these pumps rise to the challenge.

When you need peak performance from a variable-displacement axial-piston pump, the Oilgear pump PVV line is ready. No matter what pressure and flow demands you face, these pumps rise to the challenge.

When you need peak performance from a variable-displacement axial-piston pump, the Oilgear pump PVV line is ready. No matter what pressure and flow demands you face, these pumps rise to the challenge.

Quiet operation, high efficiency and compact design — all available at a competitive price. That’s what Oilgear PVWC closed-loop, hydrostatic axial-piston hydraulic pumps bring to the table. All designed around our proven rotating group.

Quiet operation, high efficiency and compact design — all available at a competitive price. That’s what Oilgear PVWC closed-loop, hydrostatic axial-piston hydraulic pumps bring to the table. All designed around our proven rotating group.

Quiet operation, high efficiency and compact design — all available at a competitive price. That’s what Oilgear PVWC closed-loop, hydrostatic axial-piston hydraulic pumps bring to the table. All designed around our proven rotating group.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids—and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Designed to be cost-effective, stable and low-maintenance, PVWJ is a variable-displacement axial-piston pump with a medium control response. Like all Oilgear pumps, it thrives on low-viscosity fluids — and comes in a variety of frame sizes and available displacement rates.

Extremely effective across numerous industrial applications that require quick response in extreme environments, the XD5 series of pumps offer lightning-fast control response on both low-viscosity fluids and standard hydraulic oil. Engineered to handle the most challenging environments, they have been designed to be a high-performance solution for demanding mobile applications.

Hydraulic systems are in general members of the fluid power branch of power transmission. Hydraulic pumps are also members of the hydraulic power pack/hydraulic power unit family. Hydraulic units are encased mechanical systems that use liquids for hydraulics.

The hydraulic systems that hydraulic pumps support exist in a range of industries, among them agriculture, automotive manufacturing, defense contracting, excavation, and industrial manufacturing. Within these industries, machines and applications that rely on hydraulic pumps include airplane flaps, elevators, cranes, automotive lifts, shock absorbers, automotive brakes, garage jacks, off-highway equipment, log splitters, offshore equipment, hydraulic motors/hydraulic pump motors, and a wide range of other hydraulic equipment.

When designing hydraulic pumps, manufacturers have many options from which to choose in terms of material composition. Most commonly, they make the body of the pump–the gears, pistons, and hydraulic cylinders–from a durable metal material. This metal is one that that can hold up against the erosive and potentially corrosive properties of hydraulic fluids, as well as the wear that comes along with continual pumping. Metals like this include, among others, steel, stainless steel, and aluminum.

First, what are operating specifications of their customer? They must make sure that the pump they design matches customer requirements in terms of capabilities. These capabilities include maximum fluid flow, minimum and maximum operating pressure, horsepower, and operating speeds. Also, based on application specifications, some suppliers may choose to include discharge sensors or another means of monitoring the wellbeing of their hydraulic system.

Next, what is the nature of the space in which the pump will work? Based on the answer to this question, manufacturers will design the pump with a specific weight, rod extension capability, diameter, length, and power source.

Manufacturers must also find out what type of substance does the customer plan on running through the pumps. If the application calls for it, manufacturers can recommend operators add other substances to them in order to decrease the corrosive nature of certain hydraulic fluids. Examples of such fluids include esters, butanol, pump oils, glycols, water, or corrosive inhibitors. These substances differ in operating temperature, flash point, and viscosity, so they must be chosen with care.

All hydraulic pumps are composed in the same basic way. First, they have a reservoir, which is the section of the pump that houses stationary fluid. Next, they use hydraulic hoses or tubes to transfer this fluid into the hydraulic cylinder, which is the main body of the hydraulic system. Inside the cylinder, or cylinders, are two hydraulic valves and one or more pistons or gear systems. One valve is located at each end; they are called the intake check/inlet valve and the discharge check/outlet valve, respectively.

Hydraulic pumps operate under the principle of Pascal’s Law, which states the increase in pressure at one point of an enclosed liquid in equilibrium is equally transferred to all other points of said liquid.

To start, the check valve is closed, making it a normally closed (NC) valve. When the check is closed, fluid pressure builds. The piston forces the valves open and closes repeatedly at variable speeds, increasing pressure in the cylinder until it builds up enough to force the fluid through the discharge valve. In this way, the pump delivers sufficient force and energy to the attached equipment or machinery to move the target load.

When the fluid becomes pressurized enough, the piston withdraws long enough to allow the open check valve to create a vacuum that pulls in hydraulic fluid from the reservoir. From the reservoir, the pressurized fluid moves into the cylinder through the inlet. Inside the cylinder, the fluid picks up more force, which it carries over into the hydraulic system, where it is released through the outlet.

Piston pumps create positive displacement and build pressure using pistons. Piston pumps may be further divided into radial piston pumps and axial piston pumps.

Radial pumps are mostly used to power relatively small flows and very high-pressure applications. They use pistons arranged around a floating center shaft or ring, which can be moved by a control lever, causing eccentricity and the potential for both inward and outward movement.

Axial pumps, on the other hand, only allow linear motion. Despite this, they are very popular, being easier and less expensive to produce, as well as more compact in design.

Gear pumps, or hydraulic gear pumps, create pressure not with pistons but with the interlocking of gear teeth. When teeth are meshed together, fluid has to travel around the outside of the gears, where pressure builds.

External gear pumps facilitate flow by enlisting two identical gears that rotate against each other. As liquid flows in, it is trapped by the teeth and forced around them. It sits, stuck in the cavities between the teeth and the casing, until it is so pressurized by the meshing of the gears that it is forced to the outlet port.

Internal gear pumps, on the other hand, use bi-rotational gears. To begin the pressurizing process, gear pumps first pull in liquid via a suction port between the teeth of the exterior gear, called the rotor, and the teeth of the interior gear, called the idler. From here, liquid travels between the teeth, where they are divided within them. The teeth continue to rotate and mesh, both creating locked pockets of liquid and forming a seal between the suction port and the discharge port. Liquid is discharged and power is transported once the pump head is flooded. Internal gears are quite versatile, usable with a wide variety of fluids, not only including fuel oils and solvents, but also thick liquids like chocolate, asphalt, and adhesives.

Various other types of hydraulic pumps include rotary vane pumps, centrifugal pumps, electric hydraulic pumps, hydraulic clutch pumps, hydraulic plunger pumps, hydraulic water pumps, hydraulic ram pumps, portable 12V hydraulic pumps, hydraulic hand pumps, and air hydraulic pumps.

Rotary vane pumps are fairly high efficiency pumps, though they are not considered high pressure pumps. Vane pumps, which are a type of positive-displacement pump, apply constant but adjustable pressure.

Centrifugal pumps use hydrodynamic energy to move fluids. They feature a rotating axis, an impeller, and a casing or diffuser. Most often, operators use them for applications such as petroleum pumping, sewage, petrochemical pumping, and water turbine functioning.

Electric hydraulic pumps are hydraulic pumps powered by an electric motor. Usually, the hydraulic pump and motor work by turning mechanisms like impellers in order to create pressure differentials, which in turn generate fluid movement. Nearly any type of hydraulic pump can be run with electricity. Most often, operators use them with industrial machinery.

Hydraulic clutch pumps help users engage and disengage vehicle clutch systems. They do so by applying the right pressure for coupling or decoupling shafts in the clutch system. Coupled shafts allow drivers to accelerate, while decoupled shafts allow drivers to decelerate or shift gears.

Hydraulic ram pumps are a type of hydraulic pump designed to harness hydropower, or the power of water, to elevate it. Featuring only two moving hydraulic parts, hydraulic ram pumps require only the momentum of water to work. Operators use hydraulic ram pumps to move water in industries like manufacturing, waste management and sewage, engineering, plumbing, and agriculture. While hydraulic ram pumps return only about 10% of the water they receive, they are widely used in developing countries because they do not require fuel or electricity.

Hydraulic water pumps are any hydraulic pumps used to transfer water. Usually, hydraulic water pumps only require a little bit of energy in the beginning, as the movement and weight of water generate a large amount of usable pressure.

Air hydraulic pumps are hydraulic pumps powered by air compressors. In essence, these energy efficient pumps work by converting air pressure into hydraulic pressure.

Hydraulic pumps are useful for many reasons. First, they are simple. Simple machines are always an advantage because they are less likely to break and easier to repair if they do. Second, because fluid is easy to compress and so quick to create pressure force, hydraulic pumps are very efficient. Next, hydraulic pumps are compact, which means they are easy to fit into small and oddly shaped spaces. This is especially true in comparison to mechanical pumps and electrical pumps, which manufacturers cannot design so compactly. Speaking of design, another asset of hydraulic pumps is their customizability. Manufacturers can modify them easily. Likewise, hydraulic pumps are very versatile, not only because they are customizable, but also because they can work in places where other types of pump systems can’t, such as in the ocean. Furthermore, hydraulic pumps can produce far more power than similarly sized electrical pumps. Finally, these very durable hydraulic components are much less likely to explode than some other types of components.

To make sure that your hydraulic pumps stay useful for a long time, you need to treat them with care. Care includes checking them on a regular basis for problems like insufficient fluid pressure, leaks, and wear and tear. You can use diagnostic technology like discharge sensors to help you with detect failures and measure discharge pressure. Checking vibration signals alone is often not enough.

To keep yourself and your workers safe, you need to always take the proper precautions when operating or performing maintenance and repairs on your hydraulic pumps. For example, you should never make direct contact with hydraulic fluid. For one, the fluid made be corrosive and dangerous to your skin. For two, even if the pump isn’t active at that moment, the fluid can still be pressurized and may potentially harm you if something goes wrong. For more tips on hydraulic pump care and operation, talk to both your supplier and OSHA (Occupational Safety and Health Administration).

Pumps that meet operating standards are the foundation of safe and effective operations, no matter the application. Find out what operating standards your hydraulic pumps should meet by talking to your industry leaders.

The highest quality hydraulic pumps come from the highest quality hydraulic pump manufacturers. Finding the highest quality hydraulic pump manufacturers can be hard, which is why we have we listed out some of our favorites on this page. All of those whom we have listed come highly recommended with years of experience. Find their information nestled in between these information paragraphs.

Once you have put together you list, get to browsing. Pick out three or four hydraulic pump supply companies to which you’d like to speak, then reach out to each of them. After you’ve spoken with representatives from each company, decide which one will best serve you, and get started on your project.

VDP pumps are variable displacement axial piston pumps designed to use in open circuits. They are available from 40 to 120 cm3/rev and with a maximum pressure of 450 bar. They can be assembled directly into the PTO´s with support. They come standard with 1 1/4″ DIN shaft and BSP threaded ports for high pressure applications.

APPLICATIONS: Combined with any of our wide range of PE series eaton fuller PTO, PIM series Volvo I-Shift/Mack mDrive PTO, PA series hot shift PTO for AISIN and ALLISON automatic transmissions, PDT series PTO for the Detroit DT12, it can power your PTO hydraulic pumps wet kit or equipment on high pressure application such as truck mounted hydraulic cranes.

A common variable displacement pump used in vehicle technology is the axial piston pump. This pump has several pistons in cylinders arranged parallel to each other and rotating around a central shaft. A swashplate at one end is connected to the pistons. As the pistons rotate, the angle of the plate causes them to move in and out of their cylinders. A rotary valve at the opposite end from the swashplate alternately connects each cylinder to the fluid supply and delivery lines. By changing the angle of the swashplate, the stroke of the pistons can be varied continuously. If the swashplate is perpendicular to the axis of rotation, no fluid will flow. If it is at a sharp angle, a large volume of fluid will be pumped. Some pumps allow the swashplate to be moved in both directions from the zero position, pumping fluid in either direction without reversing the rotation of the pump.

Piston pumps can be made variable-displacement by inserting springs inline with the pistons. The displacement is not positively controlled, but decreases as back-pressure increases.

In the variable displacement pump category, customers can find this variable displacement axial piston pump that is mainly used as a stand-alonepump. The other type of axial piston pump is constant pump. This type of pump can be identified by parallel arrangement of many pistons to the drive. It is possible to adjust the flow rate of fluid when using such pump. The variable flow rate is possible as the pump can adjust its geometric output volume. This type of pump finds use in hydraulic motors and cylinders for controlling their speed.

Gear Pump – Small to Medium Displacement Sleeve, Hydraulic Bushing Pumps, 4.5 – 17 GPM. The 197 series bushing pump has a minimum operating speed of 600 rpm, continuous operating speed 2400 rpm. Drive shaft PL factor; Integral up to 10000, Continental 6000. Built from cast iron for robust applications. Single and multiple units are […]

Gear Pump – Medium Displacement Sleeve Bushing Pump. The 257 Series pump is a heavy-duty sleeve bushing design in medium frame size. Working Pressure up to 4500 psi. Cubic inch displacements from 1.29 through 6.43 with speeds up to 2400 RPM and flows up to 65 GPM. The bushing pump is also available with outboard bearing options […]

Large Gear Pump – Sleeve Bushing Design, Large Frame Size. A large displacement sleeve bushing pump, in a large frame size, with working pressures up to 3500 psi, cubic inch displacements from 1.80 – 9.00, speeds up to 2400 RPM and flows up to 93 GPM. The 360 Series cast iron gear pumps are primarily […]

Gear – Medium Displacement Roller Bearing Gear Pump, 5.5 – 28 GPM. The P5000/P5100 series is a medium displacement, roller bearing gear pump. This pump is a cast iron pump ensuring a strong and long-lasting product able to withstand robust applications. Single and multiple units are available upon request. The pressure loaded wear plates of […]

The Series AP product range includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves.

External Gear Pump, Aluminum, 4.4 – 27.1 Displacement cm³/rev. The AP212 family has made it possible to achieve high operating pressures, excellent volumetric and mechanical efficiency and on specially developed units (LN – Low Noise) even lower noise levels. This is made possible by: The new design of gear teeth and balancing areas Use of […]

External Gear Pump, Cast Iron, 15.1 – 34.1 Displacement cm³/rev. Maintaining all the basics AP212 project characteristics, the AP212HP series is improving the reliability of the complete product, strongly increasing the mechanical resistance of the pump body. This important feature, reached through the use of cast iron material and dedicated body shape, allows the life […]

External Gear Pump, Aluminum, Single and Multiple, 40.0 – 75.0 Displacement cm³/rev. The product range of  SpA includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves. Gear Pumps […]

External Gear Pump, Aluminum, 27.0 – 93.0 Displacement cm³/rev. The Series AP product range includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves. External gear pumps are widely […]

External Gear Pump, Cast Iron, Single and Multiple, 40.0 – 75.0 Displacement cm³/rev. The product range of SpA includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves. Thanks […]

Aluminum-Body, Low-Power, Oil-Operated Pumps for Auxiliary Services, 1.1 – 8 Displacement cm³/rev. The Pumps Series A 1P gear pump usually consists of a gear pair supported by two aluminum bushes, a body, a securing flange and a cover. The shaft of the driving gear projecting beyond the flange mounts a twin – lip seal ring […]

Cast Iron Flanges, Aluminum Body, High-Performance Single Pumps, 1.4 – 87 Displacement cm³/rev. The Pumps GHP are high-performance single gear pumps with an aluminum body, and a cast iron flange and cover. Displacements range from 1.4 up to 87 cc/rev (Group 1, 2 and 3). Available in different configurations (European, SAE, German standard) in a […]

Aluminum-Body, Low-Power, Oil-Operated Pumps for Auxiliary Services, 1.4 – 200 Displacement cm³/rev. The Pump ALP Series (where groups named ALP1, ALP2, ALP3, and ALP4) are suitable for the most different application in both industrial and mobile sectors. Produced in four different groups. Within each of them, the different displacements (between 1.4 and 200 cm³/rev) are […]

High-Pressure, Short Multiple Pumps,1,4 -35,2 Displacement cm³/rev. The ALPC & GHPC pumps are well designed to fit applications where multiple pumps are required to be driven by just one motor and space is too narrow for standard multiple pumps. Available displacements vary from 1.4 to 13.8 cm3/rev for group 1 and from 4.5 to 35.2 […]

Variable Displacement Axial Piston Pump, Pressure Rating of 6,090 psi. The C Series Variable Displacement Axial Piston Pumps are engineered for heavy-duty mobile equipment applications. Pumps offer a pressure rating of 6,090 psi, durable construction and a compact footprint. C Series variable displacement piston pumps have been designed for use in closed circuit hydrostatic applications. […]

Fixed Cast Iron Gear Pump, Integrated Relief Valve, and Load Hold Valve, 5,1-6,4. Displacement. The C101/C102 series combination pump valves (fixed gear pump) provide the most reliable, trouble-free performance in the industry for the dump truck and trailer applications. Operating pressures up to 138 bar (2,000 psi) speeds up to 2,400 rpm, flows up to […]

Fixed Aluminum Gear Pump, 1.87-10.50 cc/rev Displacement. The Aluminum Pump D Series fixed displacement gear pump offers high performance and high power density due to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump or a pump […]

Axial Piston Fixed Displacement Hydraulic Motor – Large Frame. The F12 hydraulic motor series has operating pressures up to 480 bar (7,000 psi) and speeds up to 7300 rpm. The F12 motor is a robust design motor and can be used in numerous applications in both open and closed loop circuits. Sizes from 30-250cc. The […]

Fixed Cast Iron Gear Pump, Integrated Relief Valve, and Load Hold Valve, 5,1-6,4. Displacement. The  G101/G102 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making it an ideal selection for the Vocational & Municipal Equipment market. It is available as a standard pump with an integrated valve […]

Fixed, Two-Piece, Cast Iron, 23-80cc. Displacement. These truck gear pumps are ideal for operators of light trucks for their hydraulic power needs. The Cast Iron Pump GP1 Series fixed displacement gear pump offers high performance and high power density dues to its two-piece cast iron construction, making it an ideal selection for the Aerial and […]

Low Noise, Low Ripple, High-Efficiency, High-Pressure Gear Pumps, 7 – 200 Displacement cm³/rev. ELIKA® pumps are extremely silent gear pumps that can be applied in situations where low noise levels are required. Using a low noise ELIKA® gear pump will eliminate harmful noises for persons and their surroundings. ELIKA® gear pumps are fully interchangeable with […]

Double Pumps and Multiple Pumps, 7 – 35 cm³/rev. ELIKA, being low-noise and low-ripple, ELI2 Multiple Series Gear Pumps is a perfect fit for all those applications that require low noise levels. The use of ELIKA gear pump eliminates adverse noise effects on humans and on the surrounding environment. The ELIKA reduces the noise level […]

Pumps with Flange and Cover in Cast Iron, 1,4 – 87 cm³/rev Displacement. These range of products have a new series of pumps named GHP, where groups named GHP1, GHP2, and GHP3 are suitable for the most different application in both industrial and mobile sectors. Available in different configurations (European, SAE, German standard) in a […]

Gear Pump, High-Performance Version, Hydraulic Drive, 6 (1.5) GPM. The GP0 gear pump with displacements up to 3,2 cm³ (0.20 inch³), Pmax 260 bar (3800 PSI), Speed from 500 to 8000 RPM. Flange, cover, and body are made of a high-quality aluminum alloy. These pumps are characterized by high-efficiency and low-noise levels through the entire rotation […]

Gear Pump, Light-Line Version, Hydraulic Drive, 6 (1.59) GPM. The GP0L Fixed Displacement gear pump, with displacements up to 2 cm³ (0.12 inch³), Pmax 250 bar (3600PSI), and speeds from 500 to 7000 RPM. Technical Features: Operating pressure 200 bar, Peak pressure 250 bar Cost-Effective design or circuits with a lower operating pressure High-quality aluminum alloy […]

Gear Pump, High-Performance Version, Hydraulic Drive, 21 (5.55) GPM. The GP1 gear pump with displacements up to 31 cm³ (1.89 inch³), Pmax 310 bar (4500 PSI), and speeds from 500 to 4000 RPM. Technical Features: Operating pressure 280 bar, Peak pressure 310 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level […]

Fixed, Aluminum, 8-19cc., Displacement. These truck gear pumps are ideal for operators of light trucks for their hydraulic power needs. The Aluminum Pump GPA Series fixed displacement gear pump offers high performance and high power density dues to its aluminum construction, making it an ideal selection for Truck applications. The GPA/GP1 series gear pumps are […]

Gear Pump, High-Performance Version, Hydraulic Drive, 67 (17.65) GPM. The GP2 gear pump with displacements up to 31 cm³ (1.89 inch³), Pmax 310 bar (4500 PSI), and speeds from 500 to 4000 RPM. Technical Features: Operating pressure 280 bar, Peak pressure 310 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level […]

Fixed, Aluminum, Pressure-Loaded Gear Pump, 9.88 – 36.50 cc/rev Displacement. Aluminum Pump H Series fixed displacement gear pump offers high performance and high power density due to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump, a […]

Gear Pump, Light-Line Version, Hydraulic Drive, 65 (17.17) GPM. The GP2L gear pump with displacements up to 30 cm³ (1.83 inch³), Pmax 300 bar (4350 PSI), and speeds from 400 to 4000 RPM. Technical Features: Operating pressure 270 bar, Peak pressure 300 bar Cost-effective design or circuits with a lower operating pressure High-quality aluminum alloy […]

Gear Pump, High-Performance Version, Hydraulic Drive,177 (16.76) GPM. The GP3 gear pump with displacements up to 100 cm³ (6.10 inch³), Pmax 320 bar (4600 PSI), and speeds from 350 to 3200 RPM. Technical Features: Operating pressure 290 bar, Peak pressure 320 bar High-strength quality aluminum alloys pump with axial play compensation Low noise level in […]

Gear Pump, Light-Line Version, Hydraulic Drive, 177 (46.76) GPM. The GP3L gear pump with displacements up to 71 cm³ (4.30 inch³), Pmax 280 bar (4060 PSI), and speeds from 400 to 3500 RPM. Technical Features: Operating pressure 250 bar, Peak pressure 280 bar Cost-effective design or circuits with a lower operating pressure High-quality aluminum alloy […]

Fixed, Tandem Pressure-Loaded Gear Pump, 30.18/10.5 cm³/rev Max. Displacement. The Aluminum Pump HD Series fixed displacement gear pump offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. It is available as a standard pump, a […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 17 to 28 cm³ (1,04 to 1,71 in³), Continuous 280 bar (4060 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM P1A are designed to operate in a closed circuit. The available control systems make it easy to use these […]

Double Stage Pumps with Unloading Valves, 1st Stage- 1,4 – 4,1, 2nd Stage – 4,1 – 13,8 cm³/rev Displacement. The 1HL, 1PHL, and 2HL High/Low hydraulic gear pumps are special double-stage pumps with special integrated valves. The first stage, low displacement, high pressure. The second stage, high displacement, low pressure. RPM pump range 1,000 to […]

Gear Pump, Light-Line Version, Hydraulic Drive, 16 (4.31) GPM. The GP1L fixed displacement gear pumps, with displacements up to 8 cm³ (0.49 inch³), Pmax 270 bar (3900 PSI), and speeds from 600 to 6000 RPM. Technical Features: Operating pressure 230 bar, Peak pressure 270 bar Cost-effective design or circuits with a lower operating pressure High-quality […]

Variable Displacement Pump for Closed Loop Operation, Displacement 54.7 to 281.9 CC/Rev, Max. Operating Speed 2400 RPM to 3900 RPM, Max. Pressure 500 Bar, Nominal Pressure 450 Bar, Power Take-Off (PTO) Flange, Internal Gear Pump (IGP) and External Gera Pump (EGP) Available. The HPV-02 variable pump is an axial piston pump designed for high pressure […]

Fixed, Iron and Aluminum Gear Pump, 16-64cc, Displacement. The Iron and Aluminum Pump P16 Series fixed displacement gear pump offers high performance and high power density due to its part aluminum construction. The P16 fixed displacement gear pump offers a combination of high performance and lightweight due to combining a rugged cast iron pumping section […]

Variable Displacement Axial Piston Pump, Operating Pressure of 4,060. Variable, swashplate piston pumps designed for operation in open circuit, mobile hydraulic systems. The perfect choice when it comes to cost-saving installation as well as high productivity and power density. Displacement from 60 to 145 cc/rev. The P2/P3 Series has been designed to meet the specific […]

Medium Pressure Super Charged Pumps, Pressure Rating 3,000 psi. The PAVC Medium Pressure/Super Charged Pumps provide reliable high-speed operation. With a pressure rating of 3,000 psi, they are ideal for a variety of medium pressure mobile and industrial applications. Featuring a flexible, compact design, Pavc Medium Pressure Pumps deliver a reliable,easy-to-use solution for a wide […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 28 to 36 cm³ (1,71 to 2,20 in³), Continuous 280 (4060 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM P1M is designed to operate in a closed circuit. The available control systems make it easy to use these pumps in […]

Bent-Axis Axial Piston Pumps, Fixed Displacement 10 | 12 | 16 cm³ (0,61 | 0,732 | 0,976 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 10 | 12 | 16 fixed displacement axial piston pump is designed to work in an open circuit. The system […]

Bent-Axis Axial Piston Pumps, Fixed Displacement 107 | 125 cm³ (6,63| 7,63 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 107 | 125 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain 40° […]

Bent-Axis Axial Piston Pumps, Fixed Displacement 45 cm³ (2,75 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 45 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain 40° angle of inclination of the […]

Bent-Axis Axial Piston Pumps, Fixed Displacement 56 | 63 cm³ (3,42 | 3,84 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 56 | 63 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 7 to 18 cm³ (0,43 to 1,10 in³), Continuous 250 | 230 bar (3625 | 3335 psi), Pressure Intermittent 280 | 250 bar (4060 | 3625 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PO is designed to operate in a closed circuit. The available control systems […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 17 to 34 cm³ (1,04 to 2,07 in³), Continuous 280 bar (4060 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PS is designed to operate in a closed circuit. The available control systems make it easy to use these pumps […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 9+9 to 16+16 cm³ (0,55+0,55 to 0,97+0,97 in³), Continuous 280 bar (4060 psi), Pressure Intermittent 300 bar (4350psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PX is designed to operate in a closed circuit. The available control systems make it easy to use these pumps in any application for industrial and […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 7 to 18 cm³ (0,43 to 1,10 in³), Continuous 250 | 230 bar (3625 | 3335 psi), Pressure Intermittent 280 | 250 bar (4060 | 3625 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PZA have been designed to operate in a closed circuit. The available control systems […]

Variable Displacement Piston Pump, Operating Pressure of 4,060 psi. The PD Series pump offers variable displacement axial piston pumps for open-circuit applications. Featuring a compact footprint and continuous operating pressure of up to 4,060 psi, PD pumps provide quiet operation and efficient control. The PD Series of Open-Circuit Piston Pumps boost productivity in medium pressure […]

Bent-Axis Axial Piston Pumps, Fixed Displacement 80 | 90 cm³ (4.99 | 5,49 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 80 | 90 fixed displacement axial piston pump is designed to work in an open circuit. The system is designed in order to obtain […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 14 to 23 cm³ (0,85 to 1,40 in³), (Swashplate 14,5 | 19 | & 18), Continuous 250 bar (3625 psi), Pressure Intermittent 280 bar (4060 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HP P2 is designed to operate in a closed circuit. Control Systems are available […]

Closed Circuit Axial Piston Pumps, Variable Displacement , Max. Displacement from 17cc to 34 cc, SAE B Flange, (Swashplate 18 | 19 | 18 | 18 | 18°), Pressure Intermittent 300 (bar), 4350 (psi). The axial piston pumps series HP P4 34•46•50•58•65 is designed to operate in a closed circuit, for applications at medium pressure. Control […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 55 to 78 cm³ (3,35 to 4,76 in³), (Swashplate 16,3 | 17,3 | 17,7 °), Continuous 420 | 400 bar (6090| 5800 psi), Pressure Intermittent 450 | 420 bar (6525 | 6090 psi), (Power-Transmission Hydrostatic Transmission) The axial piston pumps series HP P6 series is designed to operate […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 82 to 125 cm³ (5,0 to 7,6 in³), (Swashplate 18,0, 16,5, 20,0°), Continuous 400 bar (5800 psi), Pressure Intermittent 420 bar (6090 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HP 8 82•100•125 is designed to perform in closed circuit for high pressure operations. The various control […]

Gear Pumps, Cast Iron Body, 4,cm³/rev. to 90,5 cm³/rev., up to 320 Bar. The HP Hydraulic series HPG (Series G) gear pumps are supplied in size group 2, 3 and 4. The series of products is even further completed with a full range of flanges, shaft ends, and available multiple pumps with or without valves […]

Gear Pumps, Fixed Displacement, Aluminum Body, 0,19 cm³/rev. to 88 cm³/rev., up to 310 Bar. The HP Hydraulic series L (HPL..0, HPL..1, HPL..2, HPL..2 SG Version, HPL..3, HPL..3 SG Version, HPL..4 SG Version) pumps have aluminum bodies and are suitable for a wide range of applications. Available in five different sizes: Group 0, Group 1, Group 2, […]

Fixed, High-Speed, Low Torque, Gerotor Pump, 16-64cc, Displacement. The Aluminum Pump PGG Series fixed displacement High-Speed Low Torque Gerotor pump offers high performance and high power density dues to its aluminum construction, making it an ideal selection for the Aerial, Agriculture, Construction, Forestry, Material Handling, and Turf Equipment markets. • Flows from .95 GPM to […]

Fixed, Cast Iron Gear Pump, Single, and Multiple, 16.2-64.6 cc/rev, Displacement. The PGP031 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction. • Flow range to 38.4 gpm (145.4 lpm) per section • Displacements from .985 to 3.94 cir (16.2 to 64.6 cc/rev) • Operating pressures up to […]

Swash Plate Variable Displacement Axial Piston Pump. The K3VG Series are variable displacement axial piston pumps of swash plate design for industrial equipment. The K3VG Series are available in size ranging from 63 to 560 cm³/rev with various control options including a highly precise electro-hydraulic servo regulator “ILIS”. Main features of the K3VG Series includes […]

Variable Displacement Swash Plate Design, Open Loop. The K3VL Series – medium pressure, open circuit, axial piston pumps are designed for mobile, industrial, and marine applications. The pump’s rotating groups are based on the proven design of the K3V and K3VG pumps. K3VL pumps are available in nominal displacements ranging from 1.71 to 12.20 in³/rev […]

Variable Displacement Swash Plate Design, Open Loop, Displacement 50 (cm³) to 150 (cm³). The K3VLS series are variable displacement axial piston pumps of swash plate design, suitable for use in mobile applications and industrial vehicles with medium pressure hydraulic systems. The K3VLS pumps enable flexible configuration in a wide range of applications with their compact […]

Low Noise Variable Displacement Axial Piston Pump. The K7V Series are variable displacement axial piston pumps of swashplate design, suitable for use in mobile applications. A long life is obtained by adopting large capacity of bearing and thicker shaft which reduces the load on the edge of bearing rollers. The power density if 1.5 times […]

Swash-plate Axial Piston Pump The K7VG high-pressure swashplate pump developed for general industrial machinery use and is based on long and rich experience. The adoption of the high-load bearing and friction-free contacting mechanism of shoes has achieved high reliability and long life. The unique compact rigid housing construction in addition to the semi-cylindrical swash-plate and […]

Variable Displacement Swash Plate Design, Closed Loop. The K8V series with a range in pump size from 71 to 130 cm3/rev are equipped with electric or hydraulic pilot displacement control. The K8V series pumps, having the integrated components required for a closed system, such as a charge pump, high and low-pressure relief valves, and a […]

Fixed Displacement Axial Piston Pump. The LX/LV series are fixed displacement axial piston pumps of bent axis design. They can operate for long periods of time under severe conditions. such as high-pressure continuous drive, use of fire-resistant fluids, ect. The series is suitable for the heavy duty application in press machine and steel making plants.

Gear – Small Frame, High-Pressure Bushing Gear Pump, 2.5 – 10.5 GPM. The P124 is a small frame hydraulic bushing gear pump with high-pressure capabilities, the 424 series has the same capabilities as the P124, but is capable of higher pressures. Cast Iron construction, built to with-stand robust applications. Compatible with mineral oil, water glycol, […]

Bent Axis Variable Displacement Axial Piston Pump. The LVP 017 Series are manual variable displacement axial piston pumps of bent axis design for high-pressure jacks. The bent axis type axial piston pumps have features such as high efficiency and long life. They can operate for long periods under severe conditions: high-pressure continuous drive, use of […]

Variable Displacement Axial Piston Pump The LXV/LZV series are variable displacement axial piston pump of bent axis design and have heavy duty bearings to achieve long life. They can operate for long periods of time under severe conditions: high-pressure continuous drive, use of fire-resistant fluid, etc.

Bent-Axis Axial Piston Pumps, Fixed Displacement 23 | 28 | 32 cm³ (1,4 | 1,71 | 1,95 in³), Continuous 350 bar (5075 psi), Pressure Intermittent 400 bar (5800 psi), (Power-Transmission Hydrostatic Transmission). The HM PF 23 | 28 | 32 fixed displacement axial piston pump is designed to work in an open circuit. The system […]

Fixed, Cast Iron Gear Pump, 16.2-64.6 cc/rev, Displacement. The 020 series fixed displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction making them an ideal selection for the Vocational Truck, Winch, and Oil & Gas markets. They are available as single, or multi-section pumps. and […]

Fixed, Cast Iron Gear Pump, Multiple, 21-105 cc/rev, Displacement. The PGP051 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction. The 051 series fixed displacement gear pumps offer high durability & resistance to oil contamination due to their cast iron, roller bearing construction making them an ideal selection […]

Fixed, Cast Iron Gear Pump, Multiple, 50-202 cc/rev, Displacement. The PGP076 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction. • Flow range to 121.4 gpm (459.5 lpm) per section • Displacements from 3.07 to 12.3 cir (50 to 202 cc/rev) • Operating pressures up to 200 bar […]

Fixed, Cast Iron Gear Pump, Multiple, 50-202 cc/rev, Displacement. The PGP130 fixed displacement gear pumps offer high performance and high endurance due to its cast iron construction, making it an ideal selection for the construction equipment market in particular mini-construction equipment. Available with industry standard output shafts, ports and mounts, these pumps deliver up to […]

The 315 series fixed displacement gear pumps offer high-pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. • Flow range to 32 gpm (121 lpm) […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 21 to 37 cm³ (1,28 to 2,26 in³), (Swashplate 18°), Continuous 250 bar (3625 psi), Pressure Intermittent 300 bar (4350 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series M4 PV is designed to operate in a closed circuit. Control systems actually available are making easy to […]

Fixed, Cast Iron Gear Pump, Multiple, 21-105 cc/rev, Displacement. The 350 series fixed displacement gear pumps offer high-pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. […]

Variable Displacement Closed Circuit Axial Piston Pumps, Displacement 7 to 18 cm³ (0,43 to 1,10 in³), Continuous 210 bar (3045 psi), Pressure Intermittent 230 bar (3335 psi), (Power-Transmission Hydrostatic Transmission). The axial piston pumps series HM PLB is designed to operate in a closed circuit. Displacement range 7cc thru 18cc, R or L hand rotation, single […]

Fixed, Cast Iron Gear Pump, Multiple, 44-147.5 cc/rev, Displacement. The 365 series fixed displacement gear pumps offer high-pressure durability due to their cast iron construction, making them ideal for high duty cycle mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. […]

Fixed, Aluminum, Gear Pump, 3.0 – 12.0 cc/rev, Displacement. The 505 series fixed displacement gear pumps offer cost-effective, high power density due to their aluminum, bushing block construction, making them ideal in a broad selection of markets such as Material Handling, Agriculture, Turf, as well as a variety of Industrial Applications. They are available as […]

Fixed, Aluminum, Gear Pump, 6.0 – 31.0 cc/rev, Displacement. The 511 series fixed displacement gear pumps offer cost-effective, high power density due to their aluminum, bushing block construction, making them ideal in a broad selection of markets such as Material Handling, Agriculture, Turf, as well as a variety of Industrial Applications. They are available as […]

Fixed, Aluminum, Gear Pump, 16 – 70 cc/rev, Displacement. PGP 517 pump offers superior performance, high efficiency and low noise at high operating pressures. The 517 series has a wide variety of standard options and is available to meet specific application requirements. • Sizes from 16-70cc • Operating pressures up to 250 bar (3,500 psi) […]

Fixed, Cast Iron, Gear Pump, 7-32 cc/rev, Displacement. The 610 series fixed displacement gear pumps offer the most volumetrically efficient and power dense solution due to their interlocking, two-piece cast iron design, making 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is widely used in […]

Fixed, Cast Iron, Gear Pump, 19-50 cc/rev, Displacement. The 620 series fixed displacement gear pumps offer the most volumetrically efficient and power dense solution due to their interlocking, two-piece cast iron design, making 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is widely used in […]

The self-regulating HPR-02 is a high perssure axial piston pump in a swash plate designed for open loop systems. With both clockwise and counter clockwise rotation, it is self priming at high nominal speeds.  It can reach a higher rotating speed by tank pressurization or swash angle reduction. It is a good fit for application […]

Fixed, Cast Iron, Gear Pump, 30-88 cc/rev, Displacement. The 640 series fixed displacement gear pumps offer the most volumetrically efficient and power dense solution due to their interlocking, two-piece cast iron design, making 600 series ideal for engineered mobile equipment solutions demanding energy efficient, high performing hydraulic systems. The 600 series is widely used in […]

Variable Flow, High-Pressure and High-Speed, For Open Circuits SAE, ISO, DIN), Continuous Pressure Rating up to 6,000 PSI, Intermittent Pressure Rating up to 7,250 PSI, Five Frame Sizes (80 cc – 260 cc), Maximum Speed of 2,550 RPM. The Premier Series features superior design and simplified maintenance; the Premier Series delivers high-pressure variable piston pumps […]

Variable Volume Displacement Piston Pump, Operating Pressure of 3,600 psi. The PVP Series provides durable variable volume piston pumps for medium pressure applications. With aa pressure rating of 3,600 psi and a wide range of controls, PVP pumps are efficient and reliable. The PVP Series is flexible and high-performing, resulting in increased uptime with fast […]

Axial Piston Variable Pumps, Operating Pressure Up to 420 bar. The PVplus (PV+) is an open circuit, variable swashplate piston pump. Optimized for heavy-duty industrial and marine applications. Operating pressures of up to 420 bar, high-speed ratings, a wide range of highly responsive controls, and a displacement from 16 to 360 cc/rev. The PVplus (PV+)  provides […]

Fixed Displacement, Single or Double Medium Pressur Vane Pumps. The SDV Series is a fixed displacement vane pump, ideal for low to mid pressure applications up to 2250psi. The double pump provides the flexibility of two different displacements within one housing. The single pump provides one displacement within one housing. The compact design and low […]

Axial Piston Fixed Pump, Operating Pressure of 5,000 psi and Speed Up to 350 bar. The T1 hydraulic truck pump series has operating pressures up to 350 bar (5,000 psi) and speeds up to 3200 rpm. The T1 pump has a robust design that provides circuit reliability for the most demanding truck applications, displacement 81 and […]

Small to Medium Displacement Vane Pump. The EVO vane line is both versatile and ruggedly built for the toughest applications. The PT6C Series is a small to medium displacement vane pump, with a maximum psi of 4000. The PT6C is very mobile, it is lightweight with a phosphate coating. The PT6C has a double lip […]

Medium Displacement Vane Pump. The EVO vane lane is both versatile and ruggedly built for the toughest applications. The PT6D Series is a medium displacement vane pump, with a maximum psi of 4060. The PT6D Series is perfect for mobile or industrial use with a phosphate coating. The PT6D is perfect for applications that need double lip […]

Medium Displacement Vane Pump. The EVO vane line is both versatile and ruggedly built for the toughest applications. The PT6E series is a large displacement vane pump. The PT6E series has a large displacement, uni-rotational plates, and phosphate coating, making the PT6E series ideal for applications involving roll-off, snow and ice control, and low boy/transfer trailers.

Medium Displacement Vane Pump. The EVO vane line is both versatile and ruggedly built for the toughest applications. The PT7D series is a medium displacement vane pump, with a maximum psi of 4060, and higher pressures and speed. The PT7D series 12 vane technology makes it ideal for industrial uses. The phosphate coating and bi-rotational […]

Gear Pumps, Silent, Cast Iron, Displacement from 6,1 cm³/rev. up to 25,6 cm³/rev., Pressure up to 320 Bar. The HPX PA2 Cast Iron gear pumps are specified with helical teeth and a special finishing process that significantly reduces hydraulic pulsation of the oil flow, resulting in lower noise levels and consequently recommending them as the […]

External Gear Pump, Aluminum, 1.2 – 10.0 Displacement cm³/rev. The Series AP product range includes single pumps 05-100-212-212HP-250HP-300-312HP (corresponding with the common group denominations: 05-1-2-2.5-3) and several combinations of double pumps, triple pumps, and so on, that can be assembled together according to versions of displacement, flanging, and auxiliary valves.

Variable-Displacement Axial Piston Pump with Fast Control Response. The PVG is a variable-displacement, axial piston pump with fast control response. The PVG thrives on low viscosity fluids and is available in a variety of control and porting options. It is designed to be a high-performance solution for demanding applications. PVG open loop, axial piston hydraulic […]

Variable Axial Piston Pump with Longitudinal Controls The PVK pump line consists of three sizes of variable-displacement, open-loop, axial-piston pumps. The PVK is unique from other variable pumps because it has longitudinally-mounted controls. It is recommended that legacy PVK pumps be replaced by the current PVG pump line. Available in two frame sizes and three […]

A Versatile Pump with a Modular Design. The PVM line of variable-displacement, axial-piston pumps is designed to adapt to your most demanding applications. Virtually indestructible, the modular PVM open-loop, axial-piston hydraulic pumps offer advanced engineering at an affordable price. Computer-optimized and with multiple controls available, PVM pumps deliver high performance in a compact design. Available […]

The Flagship, High-horsepower Variable Displacement Pump. The PVV line pumps represents the pinnacle of performance in a variable-displacement, axial-piston pump. Designed for power and speed, PVV open-loop, axial-piston hydraulic pumps by delivering the punch that is required for large, heavy-duty systems. Utilizing advanced engineering, the PVV pump line delivers up to 560 horsepower – four […]

Dump Pump, Gear Pump, 80 cc/rev, Displacement. The SG102 Dump Pump is part of the family of Commercial Hydraulics truck pumps. Building upon the technology of the industry standard C102/G102 pumps, the innovative SG102 Dump Pump provides a 37% faster-dumping cycle versus the standard G102. The pump is designed to fit where space is limited, […]

High Pressure Internal Gear Pump, 4,8 – 402,6 Displacement cm³/rev. The QX pumps are the 5th generation of internal gear pumps, which have proven themselves in thirty years of service around the world. The straightforward and rugged construction guarantees long service life without the need for extensive maintenance. Tandem and multiple pumps are available worldwide […]

Internal Gear Pump – up to 280 bar with One Gear St