voith hydraulic pump distributors made in china

We"re well-known as one of the leading voith manufacturers in China. If you"re going to wholesale voith in stock, welcome to get quotation from our factory. All customized products are with high quality and low price. A2FE160 pump, Piston Pump For Mixer, danfoss piston pump

With a total capacity of 2 400 MW it is one of the largest in the world. Voith supplied four reversible pumped storage units with an output of 300 MW each. The first unit was commissioned in 1998 while the last unit was commissioned in June 2000.

Due to their reliability and stability, the equipment provided by Voith has been in operation for nearly two decades. Voith has also signed technical service contracts with Guangzhou II to provide complete life-cycle-service. To date, Voith has refurbished the poles, a key component of generators, for three units in its generator workshop in Shanghai.

For hydraulic systems that place high demands on control engineering, servo pumps are the perfect solution. The basic version of these pump systems also consists of three main components:Servo inverter

Servo pumps control the pressure or the volume flow. They precisely convert electrical energy into the hydraulic energy that is currently needed in the system. The classic use of valves for control can be either completely or partially omitted. This considerably simplifies every hydraulic system.

In a joint effort, Voith in China, Japan and Germany provided four complete machine sets each rated at 255 MW, including reversible pump-turbines, motor-generators, control systems and spherical valves.

The spherical valves, set on the upstream side of spiral case, play an extremely important role in the safe operation of a pumped storage power plant. These valves weigh in at 180 tons, and have a flow-through diameter of 3.15 m and a height of 5.3 m, setting a new milestone in the history of spherical valves, manufactured in the Voith Hydro Shanghai workshop.

The torque converter provides the most time-efficient startup and shutdown of a storage pump. It transmits torque and/or power from the motor generator to the pump shaft by being filled with process water.

The startup of the storage pump already begins during the filling process. As the pressure level of the filling water rises, the torque output by the converter increases and thus accelerates the pump. This acceleration torque, which is initially very high, continuously decreases as secondary speed rises. When reaching the synchronous speed, the converter output torque corresponds to the pump priming torque.

Voith traces its North American manufacturing lineage back to 1877, when Stephen Morgan Smith began designing and producing hydraulic turbines. Today, Voith has manufacturing locations throughout North America and the US, offering a range of state-of-the-art services and products for a variety of businesses and industries.

Backed by a global network of engineering expertise, Voith’s product and service portfolio serves US customers in five key markets: Energy, Oil & Gas, Paper, Raw Materials, and Transport & Automotive.

Voith components record and transmit a wide range of operating parameters, including pressure, acceleration and temperature. Further information such as oil level, filter condition and plant efficiency can be collected for the purpose of condition monitoring. A software package is programmed to receive data from the servo inverter at regular intervals. This stored data then serves as a base, and deviations are immediately detected and predictive maintenance initiated. Through this process both the machine and system is optimized, saving valuable time and earnings. Furthermore, on-site service calls as a result are reduced by up to 70 percent.

Zuosen Hydraulic is one of the world"s leading manufacturers and suppliers of professional hydraulic piston pumps, hydraulic vane pumps, gear pumps, hydraulic valves, and accessories. The Factories are located in the Chinese leading manufacturing center- Foshan and Dongguan city.ZUOSEN owned advanced and precision machines and equipment, like Emag gear hobbing machine, Mitsubishi gear hobbing machine, Liebherr gear shaping machine, Horizontal machining center DMG MORI, CNC grinding machine, NC honing machine, CNC lathe, etc. Zuosen also owned the precision measuring equipment, like the three coordinates measuring instrument, Gear measuring center, Rockwell hardness tester, the noise test room, Pressure &Flow & Temperature test platform, Surface Roughness & Dynamic Balance Tester leakage detecting tools, etc. Now Zuosen has a hundred long-term distributors and partners worldwide.

- The ring and shaft teeth processing for Voith internal gear pumps are extraordinarily precise thanks to a special production procedure. This keeps the pressure pulsation extremely low, improves the control loop performance in the hydraulic system, and allows your machine or system to function with high precision. The manufactured products are of exceptionally high quality. An additional plus is the low noise emission. This reduces the effort and costs associated with noise abatement. Workplace guidelines can be met in most cases without the need for additional measures.

- Our optimized radial and axial gap compensation reduces volumetric losses over the entire operating pressure range. This helps Voith internal gear pumps achieve excellent volumetric efficiency. This results in better overall efficiency and energy savings during operation. The high volumetric efficiency of Voith"s internal gear pumps makes them ideal for variable speed drives. With variable speed drives, energy cost savings in hydraulic systems can reach 70% and noise emissions can be reduced by up to 25 dB(A).

- Voith internal gear pumps are built to be robust, compact, light, and low-maintenance. They commonly feature a service life of several decades and high availability. Your hydraulic system operates reliably, keeping your maintenance costs low and your maintenance downtimes short.

If you are looking for a different type of water pumps, such as a bors hoe water pumps, is an excellent choice for both large and high-pressure water pumps. As the name implies, it is a by-product of the two types of electricith pumps, which are both great and long-lasting. The pump is usually a hydraulic piston pump, with one or two piston hydraulic pumps.

They are usually made of a hydraulic piston. And the other type is the hydraulic piston pump. Xy water pumps are great for high-pressure applications, such as piston pumps, which are in a form of hydraulic piston pumps.

Voith pumps offer high volumetric efficiency and provide the ideal solution for variable speed drives while offering overall efficiency improvements through reducing ma­chine or system power consumption.

The range of internal gear pumps comprises: IPS, IPVA, IPVAP, IPCA, IPCAP, IPC, IPVS, IPH and IPV series. They are well-suited for any application in the low, medium, and high-pressure range. The pumps are available as: single pumps, pump combinations (multi-flow pumps, multi-circuit pumps), motor pump units, variable speed pumps and servo pumps.

Please contact us for further technical details and configuration options or if you cannot see the Voith hydraulic pumps that you need listed – we’ll be delighted to help!

Progressive Power & Control sells internal gear pumps, high pressure gear pumps, low-viscosity fluid pumps, multiple flow pumps from Voith Turbo. Voith Turbo purchased H+L Hydraulik GmbH & Co. KG formerly known as Hartmann+Lämmle GmbH Co. KG, enhancing the Voith hydraulic component offerings with the VTHL (or VT H+L) hydraulics division to serve mobile hydraulics and industrial hydraulic customers.

Voith pumps are also used in many manufactured systems. Rather than pay the "upcharge" from the manufacturer, we can frequently provide you with the exact Voith replacement component you need for your equipment.

Voith internal gear pumps allow you to save space in your machine. The high rates of efficiency, thanks to gap compensation, allow efficient operation, and the optimized pressure progressions ensure low pump flow and pressure pulsations in your hydraulic system. This, combined with a compact force guide inside the Voith internal gear pump, reduces noise emissions so you can more easily meet the ever tightening workplace regulations on sound output.

Both the high-pressure and medium-pressure Voith IP pumps share similar design features, including radial compensation, axial compensation, internal gearing and plain bearings which ensure a smooth flow with minimal pulsation. IP pumps can be combined to create systems with multiple flows.

Internal gear rotation draws hydraulic oil or other pressure fluid into the area between the pinion gear and the internal gear. Radially, the gear chambers are closed by the gear teeth meshing. Pressure fluid is displaced when the tooth heads enter the gaps between gear teeth. The axial plates seal the pressure chamber with the minimal possible gap, reducing volume loss and increasing efficiency.

Voith IP pumps of the same or different sizes can be combined to form multiple-flow pumps. All sizes of Voith multi-flow pumps are available as two or three-flow pumps, and as four-flow pumps by custom order.

Directional control fast pilot valves make switching times possible, over 50% faster than direct-controlled valves. Switching time adjustment, stroke limiter and monitoring are available as options. Voith Turbo Hydraulics offers special equipment with standard directional control valves. Due to the compact building design with standing magnet (double solenoid coil with 4/3 valves) the valves can be integrated even in the smallest fitting spaces.

Voith Turbo hydraulic flow control valves are pressure compensated in the millisecond range, and changes in viscosity do not influence the flow rate.

Direct-controlled Voith Turbo pressure control valves are constructed in seat or piston design. The pressure control valve cartridges can be built directly into control blocks. Voith accumulator charging valves with constant switching limit and soft switching are particularly suitable for drive systems. Use memory load valves to design the installed drive power for the average need. All pressure control valves can be equipped with a gauge connecting valve.

The combination of structure and intermediate plate devices permits the realization of control units with many functions in a small space. The control paths and thus the oil columns are kept very short, a necessary condition for good dynamic behavior of the hydraulic control.

Pressure relief valves, type DBV, are capable of controlling and limiting the operating pressure and the flow rate in a hydraulic system. Independent of the set maximum operating pressure, the valve can switch to pressure-free circulation hydraulically, electromagnetically or via an external control oil connection.

The pressure relief valves DBV 50/60 switch the flow on and off depending on the pressure (hysteresis normally set to 10% of system pressure). To allow direct attachment to hydraulic pumps, and especially Voith IP pumps, the pressure relief valves are available with SAE flange connections in 4 sizes (10, 16, 25, 32 mm). The installation orientation can be freely selected.

VTHL electro-hydraulic amplifiers are numerically controlled precision drives. They consist of the set value input assembly, follow-up control valve and the actuator, which can be either a cylinder or a hydraulic motor. Actuator and follow-up control valve are linked by mechanical feedback. Electric low-power set value input combined with a hydraulic actuator result in high power density, low energy consumption, and high closed-loop gain. The electronic controls are coordinated with the special requirements of electro-hydraulic amplifiers. Interface modules make interfacing possible to all kinds of machine controls.

Voith Turbo has succeeded in integrating the well-established internal gear pumps, type IPM (medium pressure, up to 175 bar) and type IPV (high pressure, up to 330 bar) in an asynchronous electric motor. With that an electro-hydraulic unit is available which is very compact in design while also ensuring remarkable low noise emissions. Variable flow from fixed displacement pumps, electric motor - pump - aggregate (with frequency inverter)

The EPA/EPAF Voith internal gear pump or pump combinations generate pressure and volume flow. Asynchronous motor to drive the pump. Frequency inverter for controlling the speed of the motor. EPA/EPAF units can be created with all Voith internal gear pumps

The EPAF variable-speed motor pump unit with the internal gear pump which was specially developed for the delivery of low-viscosity media. Due to its renowned high efficiency, the IPME pump type is particularly suited as a delivery pump for the cooling lubricant circuit in machines with internally cooled tools. A pressure-dependent drive speed control allows cooling lubricant to be delivered as and when it is required. Pressures up to 100 bar can be generated.

VTHL hydraulic units guarantee your pressure supply. With Voith"s accumulator charging technique you generate exactly as much hydraulic energy as demanded by the process. The momentary available volume flow, dependent on the selected accumulator size, will be a multiple of the actually installed pump volume capacity.

Voith Turbo BHS Getriebe GmbH (BHS) manufacture high performance turbo gearboxes, couplings and rotor turning gear units for high-speed and industrial applications for the power plant equipment industry. We have realised turbo gear unit products for applications up to a transmitted output of 80MW or rotational speeds of up to 80,000rpm. BHS’ client base includes numerous global players and leading original equipment manufacturers and operators, all of whom value our products and services.

BHS turbo parallel shaft gears are used wherever a reliable system is demanded. These gears achieve high speeds and power densities. They are built both in horizontal and vertical arrangements, which makes them highly adaptable. Additional units, such as lubrication oil pumps and rotor turning gears, can be mounted on the free shaft ends of the gears.

BHS planetary gears are built for a wide range of power and speed requirements and are used for a diverse range of applications. Our planetary gears are used predominantly in turbo systems with steam / gas turbines, compressors, blowers and pumps. In addition, planetary gears are also suitable for high-speed test stands or even hydroelectric power stations.

Established in the year 2013, Shiptek Machineryare the leadingWholesale Trader and Exporter of Hydraulic Pumps, Hydraulic Motors, Hydraulic Power Pack and much more. These products are praised in the market and widely cherished for their low maintenance, application specific design, proper functioning, high torque speed, easy installation, different current operating range, innovative design and rust proof.