webster hydraulic pump seal kit brands

The Webster brand is known for its excellent quality and long-life performance gear pumps. Over the 60+ years many companies had acquired the Webster brand. While many of those companies are no longer providing Webster components, Hydraulic.net specializes in providing replacement Webster gear pumps, many models that are considered obsolete in the market are still available through Hydraulic.net.

Hydraulic.net has over 30 years of experience. We worked with Webster in the early years and a large percentage of the pumps we ship fall under the Webster brand. Hydraulic.net is one of the largest providers of Webster replacement pumps today. We are proud of our experience, knowledge, and commitment to quality. For reliable and accurate gear pumps you just need to give us a call. Our facilities are in North East Florida where we serve customers across the US, Canada, Mexico, and Internationally.

For any pump inquiries we are available via phone 8:30 AM to 5:00 PM, Monday through Friday at (800) 765-5670. We are also available via through the quote request form on the website.

We carry a large inventory of parts and try to ensure the pumps we find our customers need most often are in stock and ready to ship. In many cases we can ship your pump to quickly and get you back up and running.

When you are in need of a replacement hydraulic pump, we are your source for reliable information and an exact match replacement. We stock over 350 hydraulic pumps for immediate shipment. You can depend on us to make sure you have the right pump for your application and get it to you quickly.

Our experience of over 30 years designing and producing hydraulic pumps for major OEMs is now being applied to “direct to the consumer” and small-batch custom hydraulic pumps for specialty markets. We stock the major hydraulic pumps used in heavy equipment, tractors, and machinery.

Various options available include single to 5-stage units, 0.32 CID through 4.74 CID, priority flow control and relief options, isolated bearing carriers, 10 different shaft options, special seals, and many more.

"description": "T.R. Wigglesworth Machinery has a wide selection of quality new & used Webster & Bennett Equipment including Boring mills, Tooling, and Accessories. Browse our selection and request a quote for pricing and more info.",

"twitter:description": "T.R. Wigglesworth Machinery has a wide selection of quality new & used Webster & Bennett Equipment including Boring mills, Tooling, and Accessories. Browse our selection and request a quote for pricing and more info.",

"og:description": "T.R. Wigglesworth Machinery has a wide selection of quality new & used Webster & Bennett Equipment including Boring mills, Tooling, and Accessories. Browse our selection and request a quote for pricing and more info.",

Webster and Bennett, VTL, 18" OAL. Thinner shaft length - 12(7/8)" Thinner shaft diameter - 2(3/8)" Thick end length - 5(1/8)" with 11slots 2(3/4) in length Thick end diameter - 3" Insert rest - (5...

Item 1205 WEBSTER & BENNETT WORM GEAR Fits a variety of model and sizes. Note: This is an O.E.M. Webster & Bennett "New Old Stock" Part. The unit is in Excellent condition. Offered "As, Is". 6" x ...

Hydraulic Component Services can rebuild and supply many different varieties of pumps including hydraulic pumps, pneumatic pumps, gear pumps, vacuum pumps, piston pumps, centrifugal pumps, air over oil pumps, and bane pumps.

We provide service for all Vickers, Cessna, Hydreco, Commercial, Dynapower, Sundstrand, Char Lynn, Ross, Eaton, Continental, Webster, Hydura, Tyrone, H.P.M., Parker Hannifin, Gresen, Dynex, Racine, Denison, Oilgear, and Rexroth hydraulic pumps and motors. Mazak and Mori Seki are two of the many CNC machine manufacturers for whom we rebuild the components.

For complete service on all sizes and types of hydraulic and pneumatic rams and cylinders contact Hydraulic Component Services. We can provide you with the exact service you need.

All cylinders are disassembled, inspected, and cleaned. Shafts and tubes are checked for taper, concentricity, and chrome plating. Pistons and bearings are checked and, when necessary, are resized to factory tolerances. All cylinders are honed and polished. Packing seals, wipers and piston rings are replaced. All cylinders are pressure oil tested and painted.

All check valves, cylinder port reliefs and the main relief are inspected, reseated, and reset to manufacturer’s specifications. All seals are replaced, and the valve is pressure oil tested. Internal leakage is measured in cubic inch leakage per minute and back pressured for external leakage. The valve body is fitted with cap plugs and painted.

At Hydraulic Component Services we specialize in rebuilding any hydraulic and machine tool index motors. Quality machine tool indexing motors, whether a positioning motor or a hydromechanical revolution positioner, can be brought back to their original high efficiency and reliability quickly, at a fraction of the price and much faster than taking delivery of a new indexing motor.

We specialize in Mazak, Giddings & Lewis, Mori Seiki, Daewoo Puma, Hitachi Seiki, Okuma, Kitamura, Nakamura, Mitsubishi, Hitachi, Okuma Howa, Cincinnati, Toshiba, Toyoda, Enshu, Matsuura, OKK, Hyundai, Bullard, Brother, Miyano, Liebherr, Takisawa, Makino and Mitsui Seiki.

Additionally, we have access to quality machine tool indexing motors which are manufactured by fine Japanese Companies including Nippon, Nachi, Daikin, Orbmark, Trochoid, Gerotor, Kitagawa and NOP.

The true depth of our knowledge lies within the diagnosis and repair of hydraulic pumps and other hydraulic products. Whether we have your unit in stock or not, the repair is always an option. In fact, it may be your best option for obsolete and hard to find hydraulic pumps, motors, valves, and servos.

Tri-State Hydraulics is a proud distributor of Hercules Sealing products. We offer a wide variety of seals & seal kits for all brands of cylinders. Our seals are of the highest quality and are available in a huge range of inch or metric sizes. Please call us to see if we stock your seal kit.

Some Cylinder brands and styles my have unpredictable seal types. In the case there is not a direct crossover for your seal types please bring your cylinder to us and a technician will measure and match them individually. In most cases we can have the seals you need same day. Please call ahead to avoid the wait or feel free to drop if off one day and pick-up the seal kit next day.

Tri-State Hydraulics is a distributor of Yates Cylinders. These heavy duty cylinders are offered in NFPA mounting style, JIC interchangeability and completely custom configuration. Call us for a quote today!

Tri-State Hydraulics is a distributor of Yates Cylinders. These heavy duty cylinders are offered in NFPA mounting style, JIC interchangeability and completely custom configuration. Call us for a quote today!

We can crossover old and obsolete pumps. If your OEM quotes you a long lead time we might be able to offer you a replacement of the same or a 3rd party brand.

We are the areas Distributor for Young Powertech pumps and motors. With drop in replacements for most Char Lynn, White, Parker, Dan Foss & M&S motors ALL PRODUCTS INCLUDES: