webster hydraulic pump specs quotation

Webster – Danfoss HC series is another series from the high-performance line known for their consistent quality, long life hydraulic gear pumps. Over the years the Webster brand has been sold and acquired by multiple companies. Leaving very few resources for consumers to find replacement hydraulic gear pump. Hydraulic.net has been providing Webster pumps since the beginning and continues today as one of the few quality manufactures with the capability and expertise to build these hard to find pumps with accuracy, quality, and reliable pumps. We stock several models and parts that allows us to often ship quickly.

HC series pumps are usually compact and extra rugged, HC Series is being used on jobs ranging from lubrication systems to power systems. Rugged cast iron housings, designed for extra strength, are assembled with eight high strength hardened screws, spaced for even distribution of pressure loads. A double row ball bearing absorbs compound driving thrust, and heavy-duty needle bearings at other bearing points assure high mechanical efficiency.

When rotation is one direction only is required, the HC series pups are available with an internal bleed which eliminates the drain port. For installations of this type, rotation clockwise (RH) or counter clock-wise (LH) when looking at the shaft end of the pump should be specified.

With external drain, rotation may be in either direction. In some cases, Bi-rotational pumps replacement pump may not be an option. When you order we will confirm.

The 4XCS is the same basic type of pump as the HC Series, however, it has a splined internal drive plus replacement bronze wear plates for east of field service.

Listed in the table below are some of the HC product numbers. If you don’t see the numbers from your pump listed below or you have the model or serial number then please call one of our hydraulic experts at (800) 765-5670, Monday through Friday, available 8:30 to 5:00 PM EST or you may submit a quote request and we will get back to you quickly. We can cross match the numbers from your Webster pump to confirm the replacement options.

Working with Hydraulic.net means you will experience quality, accuracy, and reliability. Our pumps are built and tested in-house from our St. Augustine, Florida facilities. With over 30 years of experience working with Major OEMs, distributors, repair shops, and end users, Hydraulic.net has the pumps you need and our goal is to help our customers as quickly as possible. Call us at (800) 765-5670 or submit a quote request, we are here to help!

Quality, Long-life, Performance are words often used to describe the Webster Hydraulic Pump brand. The brand has changed hands over the years and limited products are still be produced by other OEMs and manufactures. Hydraulic.net is your source for Webster HB series pumps.

HB series gear pumps were designed to be versatile and adaptable to a broad range of applications. There are seven basic displacements ranging from .061 to .591, featuring heat treated alloy steel shafts and gears, high-density gray iron gear plates, double lip seals and heavy-duty needle bearings for long life and top mechanical efficiency. Straight-keyed shafts are standard on all models with tang shafts optional.

HBSV model pumps have four needle bearings, internal drain, and integral check and relief valves. Rotation ‘RB’ (clockwise) or ‘LB’ (counterclockwise), when looking at the shaft end, must be specified when ordering.

The above table includes some of the HB series product numbers. If you don’t see your product number listed or perhaps you have the serial number, no problem! Our hydraulic experts can help. Give us a call at (800) 765-5670 between 8:30 AM to 5:00 PM EST or submit a quote request. We will cross-reference your numbers in our system and confirm. Our goal is to get you an answer as quickly as possible. Our inventory is everchanging as we try to keep stock on the pumps and parts our clients need. In many cases, we are able to ship your pump in 24 to 48 hours.

Hydraulic.net prides themselves in delivering accurate, reliable, quality pumps to our customers. For over 30 years we have served OEMs, distributors, repair shops, and end users. When you have a hydraulic gear pump that needs to be replaced we can help. Our expertise with the Webster is strong, we have been supplying the market with Webster pumps from the beginning and although many models are no longer in production we have the knowledge and ability to build to order to the original specifications. Hydraulic.net is your source for hard to find pumps. Our facility is in North East Florida. We build the pumps here in-house and test prior to shipping.

Equipped with bi-directional check valves, the Chief MH Series series features small displacement and high pressure ratings. The MH series Pump/motors have an aluminum body with cast iron flange construction, and case drain. Available displacements range .065 to.517cu.in/rev. Similar to MTE “D” series and Sauer-Danfoss Webster YB series.

A hydraulic valve is a mechanical device that regulates the flow of the hydraulic fluid in a hydraulic system. Hydraulic systems are typically high pressure systems, ranging from 200 Bar averaging 700 Bar upwards...

A hydraulic valve is a mechanical device that regulates the flow of the hydraulic fluid in a hydraulic system. Hydraulic systems are typically high pressure systems, ranging from 200 Bar averaging 700 Bar upwards...

These example sentences are selected automatically from various online news sources to reflect current usage of the word "gear." Views expressed in the examples do not represent the opinion of Merriam-Webster or its editors. Send us feedback.

Identify your hydraulic pump? Sounds easy enough, but you might be surprised. These hydraulic pumps can look very similar, but even the slightest difference could mean the difference of thousands of dollars worth of downtime. I feel like a broken record on this one, don’t get me wrong its important to know what you’re working with and having accurate information is key to being able to make an informed decision. We have put together a quick guide to help you determine what type of hydraulic pump you have so be sure to check it out below!

It is important to identify hydraulic pumps as a lot of them looks similar. It can be hard enough to know what the product is without actually knowing what it does and the specifications that are needed. To avoid any future problems with any systems, it is best to take this chance now and find out what you need. This article gives you a step by step process on how you can identify different type of hydraulic pumps so use it as reference.

There are many types of hydraulic pumps. They can be divided into two groups, positive displacement and centrifugal. Positive displacement pumps use a mechanism to create an increase in pressure or flow by reducing the volume of the pumped liquid, for example by changing its area or speed of movement. Centrifugal pumps do not generally change the volume of the liquid but rather accelerate it to increase the pressure at the outlet and therefore the discharge velocity.

Rotary screw pumps are used for high-pressure applications and can deliver high volume with very low pressure loss. They feature a rotating helical screw that forces the liquid into the pump chamber, where it expands and pushes against the walls of the chamber. The expanding liquid then turns another helical screw that forces more liquid into the chamber, creating a positive displacement effect that increases in efficiency as more turns of the screws occur per revolution of the shaft. This type of pump has no valves or seals to wear out and requires little maintenance.

Piston pumps use pistons to compress and expand liquids at high pressures and volumes; these pumps are typically used for low-pressure applications and lower flow rates than rotary screw pumps. Piston pumps have moving parts that wear out over time but are inexpensive compared to other types of hydraulic pumps because they only require low amounts of power from an electric motor or engine to operate efficiently at high pressures.

Cavitation is a phenomenon where a liquid loses its pressure faster than it can be replenished, resulting in bubbles forming at the surface of the liquid. When these bubbles collapse, they create shock waves that damage the pump’s impeller. These shock waves can also cause wear on other parts of the pump, such as bearings and seals.

Properly sized pumps will avoid cavitations and improve efficiency. The most common way to determine if your pump is properly sized is to check its horsepower rating compared with the horsepower required to run your equipment. If the horsepower rating of your pump is less than what’s required by your equipment, you need to replace it with a larger one.

Pumps are essential parts in the industry of energy, so they must be more safe and reliable. If a pump is not well identified, the problems may increase. Therefore, it is necessary that we can identify the different types of pumps quickly and accurately. This paper will firstly introduce several common hydraulic pumps and then give you some specific tips how to identify them.

Check for a serial number on one side or another of the main body of your hydraulic pump. It may be hard to find, but it should be there somewhere. The serial number is a great way to ensure that you have received an authentic replacement part. If no such information is available on your pump, then you should consider purchasing another unit from our website or another supplier.

The first letter represents the manufacturer. The second letter is usually a number that indicates the year of manufacture. The third letter may be a number, but it will never be more than four digits long. The fourth and fifth digits are used to identify each pump within the series.

We use an industry standard 2-digit code system to identify hydraulic pumps. This code will be stamped on the side of the pump or on its plate (see image below). If this code is missing from your pump then you can easily find it in our online database:

Kawasaki hydraulic pumps are used on a variety of machines. There are many different models with different part numbers and configurations. The following information is provided to help you identify your particular Kawasaki pump.

All Kawasaki hydraulic pumps have a part number that starts with the letter “H”. This letter is followed by some numbers and letters which indicate the model number for your machine. For example, if your machine has a serial number starting with “16”, then it will have an H16 pump. If your machine has a serial number starting with “17”, then it will have an H17 pump.

Kawasaki has several different parts numbers for each model number depending on the configuration of the pump and whether or not it comes with accessories such as mounting brackets or wiring harnesses. You can tell what configuration your pump has by looking at its pictures below.

The part number and serial number are printed on a sticker affixed to the pump. This is the easiest method of identifying your Eaton hydraulic pump, but it may not be available if you need to replace your Eaton hydraulic pump immediately.

The part number and serial number are stamped into the side of the pump casing, making them visible with some effort but requiring disassembly in order to read them. This can be done in-house without sending your hydraulic pump back to us for service or replacement.

Series 800 — These are industrial duty pumps with capacities ranging from 10 to 2,500 gallons per minute (gpm) at pressures up to 3,000 psi and flow rates up to 20 gpm at 4,000 psi.

Series 700 — These pumps are designed for high pressure applications requiring high volumes of oil and water at pressures up to 3,000 psi. The pumps have capacities ranging from 5 to 1,200 gpm at pressures up to 3,000 psi and flow rates up to 25 gpm at 4,000 psi.

Series 600 — These pumps are designed for high volume applications requiring high pressure capability at low speeds. They are available with capacities ranging from 5 to 1,200 gpm at pressures up to 3,000 psi and flow rates up to 25 gpm at 4,000 psi.

Parker is a brand of hydraulic pump that offers a full line of pumps for industrial and commercial applications. They are designed for use in high-pressure, high-temperature and low-volume applications. Parker Hydraulic Pumps are ideal for use in construction, mining, agriculture and other industries where high pressure is needed.

Parker Hydraulic Pumps come in a variety of styles and sizes with different features to suit your needs. When you need one of these pumps installed on your equipment, it is important to know what type you have so we can find the correct replacement parts for it when needed. The following information may help you identify your hydraulic pump:

Vickers is one of the world’s largest manufacturers of hydraulic pumps. The company has been producing pumps since 1825 and continues to innovate new products today.

Vickers pumps are identified by their model numbers, which provide information about the pump’s specifications. The first two digits of a Vickers pump number indicate the size of the cylinder; the third digit indicates the type of drive system (if any); and the fourth digit indicates whether the pump is for high or low pressure operation.

For example: A V-PVC-A-7 pump has a 2-inch diameter cylinder, no gearbox, operates at high pressure and is designed for use with air or oil as its working fluid.

Webster hydraulic pumps are used in many industries and applications, including agriculture, construction, mining, and marine. They are also used in the automotive industry and other areas where high pressure is required. In order to use a Webster pump properly and safely, it is important for you to be able to identify what type of pump you have. You can determine this by looking at the label on the side of your pump or by checking with a local supplier. If you cannot find this information, there are some basic differences between the different types of pumps that will help you determine what kind of Webster pump you have.

There are four basic types of Webster hydraulic pumps: diaphragm pumps, piston pumps, rotary lobe pumps and gear pumps. Each type has its own unique features that make it stand out from the others.

Rexroth is a German company specialized in manufacturing of hydraulic components. The company also makes pumps, motors and valves among other things. Rexroth has been in business since 1924 and has over 100 years of experience in the field of hydraulics.

There are many different types of Rexroth pumps, but they all have one thing in common: they are all made according to ISO standards. These standards ensure that all pumps are made with the same quality, which means that you can expect them to last for a long time.

Rexroth hydraulic pump identification can be done by looking at the model number printed on the side of your pump’s casing. There is no need to worry about getting this wrong though because each model number follows a certain pattern so it will be easy for you to identify your particular model no matter how many digits it has or whether or not it starts with an “R”.

The diagram below shows the basic parts of a Barnes hydraulic pump. The arrows indicate the flow of oil and the dotted lines represent the flow of air.

The diagram below shows the basic parts of a Barnes hydraulic pump. The arrows indicate the flow of oil and the dotted lines represent the flow of air.

3) – A check valve that prevents reverse flow through the pump when there is pressure on both sides of it (such as when powering a hydraulic cylinder).

4) – A check valve that prevents reverse flow through the pump when there is pressure on both sides of it (such as when powering a hydraulic cylinder).

Borg-Warner hydraulic pumps are a series of inline hydraulic pump designs, which have been used for many years. They can be identified by their “BW” logo on the face of the pump.

The most common Borg-Warner Pump is the BW35-Series Series Hydraulic Pump. This pump was used on most GM vehicles from the early 70’s through the early 90’s and can be identified by its black base color and white lettering on its face plate.

These pumps were very reliable until they started to wear out around 100k miles or so due to internal wear over time. If you have a later model vehicle with this type of pump then you may want to consider replacing it with a new one before it fails completely, as these pumps are hard to find and expensive if you do find them.

The cross hydraulic pump is a type of centrifugal pump used in the oil and gas industry to extract oil from an underground reservoir. The cross hydraulic pump is often used in tandem with other pumps, which are placed in sequence and act as a closed system. The closed system ensures that each pump provides the same amount of pressure and flow.

The cross hydraulic pump can be identified by its distinctive shape and size, as well as its operational characteristics. A cross hydraulic pump has two impellers at right angles to one another, allowing for a higher flow rate than other types of centrifugal pumps. It also uses an axial impeller design, which is unique from other types of centrifugal pumps.

The Danfoss Hydraulic Pumps are used in many industries and they are very important products in this world. The main purpose of these pumps is to move fluids such as oil or water. If you want to know how to identify the model number of Danfoss hydraulic pump, then you can read our article below and find out how to do it.

The first step is to find out if your model number is written on a sticker or etched into the side of your pump. The sticker will tell you what type of pump you have and where it was manufactured. The etched information will tell you more about the specifics of your product, such as its size, horsepower rating and more!

If you cannot find your model number on either sticker or etched info, then there could be no way for you to tell which model it is without contacting Danfoss directly for help. They have many different types of pumps that they manufacture and each one has a different set of numbers associated with them so they can easily identify what kind of product it is that they need to send out to someone who needs their help!

The Haldex BH series of hydraulic pumps are used in the majority of vehicles that use Haldex. They come in different models depending on the application and are rated from 1.0 to 3.0 bar (15 PSI) pressure output. The model is normally printed on a sticker on the top of the pump, but if this has been lost or damaged you can still work out which one you have by looking at the following chart:

Muncie’s hydraulic pump identification system was started in 1986 when they introduced the “S” series rear ends. The “S” stands for “Superior”. The numbers are as follows:

The Permco brand is a familiar name in the high-end hydraulic pump market. They are known for their commitment to quality and reliability. Their pumps are covered by a lifetime warranty, so you can buy with confidence.

Permco makes both air-cooled and water-cooled hydraulic pumps in various sizes and configurations. Their pumps are commonly used in applications such as mining equipment and construction equipment.

The first step in determining a hydraulic pump is to determine the flow rate of the system that you are servicing. This information can be found in the specifications of the system. It will be expressed in gallons per minute (gpm) or liters per minute (lpm).

The next step is to calculate the pressure required to lift, push or pull whatever it is that you need to do with your hydraulic system. This can be done by using the following formula:

Once you have determined this value, it is time to choose a pump that will provide sufficient flow at this pressure level. This can sometimes be done by examining catalogs and selecting a pump that has similar characteristics as your existing pump. If this does not work, contact us and we will be happy to recommend an appropriate replacement component for your application.

The type of loads you need to move. If you are using a hydraulic pump for load handling, then you need a high-pressure unit that can handle high pressure and flow rate.

If you want to use your pump for other purposes like providing power for machines, then you should consider choosing a lower-pressure unit with a lower flow rate.

The size and weight of the load you need to move. The size of your load will determine the kind of pump you should use. If your load is small, then it will require less power than a larger load that is heavier in weight and size.

The environment where your equipment will be used. You might need an oil-lubricated or wet-type hydraulic pump if your equipment will be used in an environment where there is water or moisture present such as construction sites or mining operations where there is water involved in the process.

I have a tandem pump setup on my front loader. The pump is an older model with no markings or serial number. I need to know the exact make and model so I can order parts for it.

My question is, does anyone know where I can find some kind of identification for this type of pump? It looks like it has two cylinders mounted back to back and the pistons are connected together by a rod. It also has two pumps mounted to the same base plate, but they are not connected together in any way.

A gear pump is a device that uses the principle of hydrodynamic lubrication in order to transport fluids. It works by placing a gear-like set of blades in a container filled with fluid and rotating the blades at a high speed. As the blades move through the fluid, they create low pressure areas on either side of each blade relative to the surrounding fluid. This difference in pressure causes a net flow of fluid into the low pressure area created by each blade. The net flow of fluid through each opening creates a positive displacement pump capable of generating high discharge pressures when driven at high speeds.

Gear pumps are widely used as industrial pumps for liquids where high discharge pressures are required and where contamination prevention is important (such as in pharmaceutical applications). There are many different types of gear pumps, with variations in design and construction depending on application requirements.

3) The new pump actually was defective, binding causing low pressure due to the binding shaft and the shaft broke. You are dealing with .001 & .0001 tolerances and we are after all only human and make mistakes on assembly occasionally .

4) I"m hoping a more experienced guy like Leroy will weigh in here but until he does here goes... A solenoid valve either turns something full on, full off, or can vary pressure incrementally depending on design. Not sure what your is but if parts are loose or broken in it, then theoretically it can restrict pressure enough to give you slow fan speed and back the pump up until the shaft breaks. Pics of the gears here would go a long way to see if that was root cause. Since you started the thread with a guess here trust your instincts, you still got it ole bean!!!!! :-)

Enerpac hydraulic pumps are available in over 1,000 different configurations. Whatever your high pressure pump needs are, speed, control, intermittent or heavy-duty performance, you can be sure that Enerpac has a hydraulic power unit to suit the application.

Featuring Hand, Battery, Electric, Air and Gasoline powered models, with multiple reservoir and valve configurations, Enerpac offers the most comprehensive high pressure pump line available.

The true depth of our knowledge lies within the diagnosis and repair of hydraulic pumps and other hydraulic products. Whether we have your unit in stock or not, the repair is always an option. In fact, it may be your best option for obsolete and hard to find hydraulic pumps, motors, valves, and servos.