webster yb hydraulic pump in stock

The YB Series offers a complete range of compact and powerful hydraulic gear pumps and motors, in flows from 1 to 6 gallons (3,8 to 22,7 liters). They are ideal for applications where a lightweight pump or motor is required. Included in the YB Series are hydraulic pumps, unidirectional hydraulic motors and birotational hydraulic motors.

Because of their compact size and low weight, YB Series hydraulic gear pumps and motors are often specified whenever space and weight are limitations. Typical applications include: lawn and turf equipment, fan drive systems, lift tables and small, off-highway machinery.

QCC took over the manufacture of the Webster & CP pumps and motors product families using the original tooling, assembly and test procedures transferred to us from Danfoss the Original Equipment Manufacturer (OEM). These products are exact matches to the original equipment part numbers and have been in production for many years with QCC.

For more than 60 years, Webster has been synonymous with superior quality, high performance gear pumps and motors. QCC has been manufacturing the Webster B, YB and YC product lines since 2004. In 2010, QCC extended its gear pump and motor offering with the transfer of the CP product line from Danfoss to QCC. The Webster/QCC line of gear products ranges from 0.06 cubic inches per revolution to 9.89 cubic inches per revolution (1.80 to 162 cubic centimeters) with mounting flanges 4F17, SAE A, SAE B and SAE C mounts. Options include flow divider models and multi-section pumps. K Series hydraulic pumps and motors provide the ultimate in flexibility, with numerous displacements, features, and shaft/port options.

QCC now manufactures K Series (formerly Danfoss) Pumps and Motors which have an excellent reputation for rugged, dependable performance at continuous pressures to 3000 psi (207 bar) and speeds to 3000 rpm. Applications include in construction, agriculture, lawn/turf care, cement mixers, fan drives, power steering and more. We also have also resurrected many of the formerly “obsolete” models to support our customers’ needs including PTO hydraulic power supply systems for agricultural applications.

Hydraulic.net is comprised of a team of hydraulic pump and gear pumps experts who have been working in the industry for over 30 years. Over thirty years, our research identified pumps that were often available only in large quantities with very expensive tooling costs. Our goal was to find ways to provide high-quality pumps in smaller quantities and with little or no tooling expenses.

Words like superior, quality, high performance are synonymous with the Webster brand. The highly coveted Webster brand was sold and acquired multiple times, Sauer-Danfoss supplied OEM Webster components for years until about 15 years ago when they stopped supplying the B series.

Hydraulic.net worked with Webster in the early years and was a preferred provider for distributors, repair shops, and end-users for Webster pumps. Specializing in providing pumps that are obsolete in the marketplace or hard to find pumps, Hydraulic.net was the top choice then and continues to be today.

B Series pumps have a maximum operating speed of 2000-3500 rpm, depending on pump displacement and pressure. This is based on operation at sea level using SAE oil with a viscosity of 175 SUS (36 cSt) at 120°F (48,8° C). Actual limits for each displacement can be found in the pump performance curves. Minimum speed for the B Series is 500 rpm. This is the normal minimum speed at which the pump will operate continuously at rated pressure.

B Series pumps are designed to operate continuously at the rated pressures shown. In most applications, this maximum pressure should be considered the maximum relief valve setting. Lower operating pressures will extend the life of the unit.

Below are some product numbers for B series pumps. Often, people may have the model or serial number; we can cross reference those numbers as well. Call one of our helpful hydraulic experts or email a quote request, providing the numbers from your pump and we will help! We try to provide an accurate quote within 30 minutes in some cases it may be longer as we are confirming timing and ensuring we are setting realistic expectations. Many of the Webster pumps are in stock regularly and able to ship in 24-48 hours. Our goal is to get you back up and running ASAP!

Hydraulic.net is committed to providing quality, accurate, and reliable products. We try to base our inventory on the needs of the market and be your one-stop provider for Hydraulic Gear pumps. Our team has extensive experience in hydraulics pumps and have been working in the industry for over 30 years. Over the years Hydraulic.net has operated in multiple cities on the East Coast and Mid-West. We now serve you from the Sunshine State, Florida and operate on Eastern Standard time, Monday through Friday. You can reach one of our hydraulic experts at (800) 765-5670, during the week or email a quote request after hours. We are here to help!

Equipped with bi-directional check valves, the Chief MH Series series features small displacement and high pressure ratings. The MH series Pump/motors have an aluminum body with cast iron flange construction, and case drain. Available displacements range .065 to.517cu.in/rev. Similar to MTE “D” series and Sauer-Danfoss Webster YB series.

Gear hydraulic pump is ideal for use on equipment in the mobile, agricultural, construction, and mining industries. Also suitable for PTO pumps, machine tools, refuse haulers and compacting equipment.

Pump is ideal for use on equipment in the mobile, agricultural, construction, and mining industries. Also suitable for PTO pumps, machine tools, refuse haulers and compacting equipment.

1 Webster B1 Series Pumps - Cast Iron Webster B1 Series pumps have high density grey iron construction with heat-treated alloy steal gears and shafts. Standard features include double lip shaft seals, heavy duty needle bearings, and straight keyed or tang shafts. This stocked pump offering all come standard with integral relief valve and outlet check, except for 11B1F17AX-L. 1/2 Straight Keyed Drive Shaft 4-Bolt pilot Built in Relief Valve and Outlet Check Part No. Model code CID / Rotation rpm Ports 163B B1E1B2-L / LH 0.5 1/2" NPT 3/8" NPT B B1E1B2-L / LH 1.2 1/2" NPT 3/8" NPT B B1E1B2-L / LH 1.7 1/2" NPT 3/8" NPT B B1E1B2-R / RH 2.3 1/2" NPT 3/8" NPT B B1E1B2-R / RH 3.7 1/2" NPT 3/8" NPT B B1E1B2-R / RH 4.6 1/2" NPT 3/8" NPT B B1E1B2-L / LH 4.6 1/2" NPT 3/8" NPT 1000 Tang Drive Shaft.5 Dia. x Bolt pilot, or 2-Bolt SAE AA 2 pilot Built in Relief Valve and Outlet Check, No valves for 11B1F17AX-1L CID / Ports Part No. Model code Rotation rpm 163B B1E1A2-L / LH 0.9 1/2" NPT 3/8" NPT B B1F17AX-1L 0.11/ LH 0.9 3/4-16 SAE 3/4-16 SAE B B1E1A2-L / LH 1.2 1/2" NPT 3/8" NPT 2500 Webster B1 Series High Speed Blower Motor - Cast Iron 1/2 Taper Drive Shaft w/ woodruff key and 5/16-24 male threaded end 2-Bolt SAE AA 2 pilot Hi-Speed needle bearings Mechanical shaft seal LH rotation with integral cross port check Rated to 7550 RPM Part No. Model code CID / Rota-GPtion rpm AA65865 M13B1F17S7-13L 0.13 / Bi 4.6 Inlet 3/4/-16 SAE Ports Outlet Rated 3/4-16 SAE 2500 Special Webster B1 Series motor is rated for continuous speeds of 7550 rpm. Currently use in agricultural applications for seed blowers/vacuums and grain transfer. This high power density model has success in cooling and material transfer. This is a stocked item and doesn"t reflect the standard attributes or the B1 motor line. Please refer to full catalog for complete offering.

2 22YBAE304-2RB09 Stock Pump Program Webster YB Series pumps are pressure balanced aluminum two piece construction with heat-treated gears and shafts. Standard features include double lip shaft seals, heavy duty needle bearings, and straight keyed or tang shafts. Compact in size and low in weight, YB motors are often specified when space and weight are limitations. Applications include Turf care, Fan Drive, Lift table, 9/16 Straight Keyed Drive Shaft 2/4-Bolt pilot Webster YB Series Pumps - Aluminum Body Model Code RPM Inlet Outlet Rated 163V YBAD012-RB 0.15 / RH /8"NPT 3/8"NPT V YBAD012-2RB 0.22 / RH /8"NPT 3/8"NPT V YBAD012-RB 0.29 / RH /8" NPT 3/8"NPT V YBAD015-2LB 0.29 / LH /8"NPT 3/8"NPT V YBAD032-RB 0.43 / RH /2"NPT 3/8"NPT V YBAD032-2LB 0.43 / LH /2"NPT 3/8"NPT V YBAD032-2RB 0.43 / RH /2"NPT 3/8"NPT V YBAD032-RB 0.58 / RH /2"NPT 3/8"NPT V YBAD032-RB 0.73 / RH /2"NPT 3/8"NPT /16 Straight Keyed Drive Shaft Stepped.374 and Threaded 5/ Bolt pilot Ports - Rear Model Code RPM Inlet Outlet 9/ V YBAE304-2RB / RH /8" NPT 163V YBAE004-30RB 0.22 / RH /8" NPT Rated Relief Valve SAE 2000 Yes 9/16-18 SAE 2000 No

3 Webster YB Series Motors - Aluminum Body 9/16 8 Tooth Spline Drive Shaft 2-Bolt SAE AA 2 pilot with quick disconnect Exception 163V1017 includes case drain Model Code GPM CID / Rotation 5000rpm Inlet Outlet Rated 163V1108 M43YBAB LA 0.43 / LH /8-14 SAE 3/4-16 SAE V1110 M43YBAB RA 0.43 / RH /8-14 SAE 3/4-16 SAE V1113 M43YBAB LC 0.43 / LH /4-16 SAE 9/16-18 SAE V1017 M73YBAB BC 0.73 / Bi /4-16 SAE 3/4-16 SAE /4-Bolt pilot - Bi-rotational check valve included Model Code GPM CID / Rotation 5000rpm Inlet Outlet Rated 163V1009 M58YBAD BC 0.58 / Bi /8-14 SAE 7/8-14 SAE 2000 Webster YB Series motors are pressure balanced aluminum two piece construction with heat-treated gears and shafts. Standard features include double lip high pressure shaft seals, heavy duty needle bearings, and straight keyed or tang shafts. Compact in size and low in weight, YB motors are often specified when space and weight are limitations. Applications include Turf care, Fan Drive, Lift table, and small off-highway machinery. Webster YB Series Impeller Motor - Aluminum Body 9/16 8 tooth shaft not shown 9/16 X 2.94 extended Drive Shaft w/ 9/16-18 male threaded end 2-Bolt SAE AA 2 pilot Model Code GPM input CID Rotation 5000rpm Inlet Outlet Rated 163V1111 M43YBAA LA 0.43 / LH /8-14 SAE 3/4-16 SAE 2000 Special Webster YB Series motor is rate for continuous speeds of 5000 rpm. Currently used in pump drive applications. it has an extended shaft to accept a direct coupling to impellor, a retaining female thread to ensure excellent retention, and a 3rd row of bearings for extra stability.

4 Webster YC Series Pumps - Aluminum Body Webster YC Series pumps feature a 2 piece high-strength aluminum construction with heat-treated alloy steal gears and shafts. Standard features include double lip shaft seals, heavy duty sleeve bearings, and straight shafts. This pump is ideally suited where a lightweight, compact, and efficient pump is needed. 3/4 Straight Keyed Drive Shaft RPM 163Y YC011-RF 0.77 / RH 6 3/4" NPT 1/2"NPT Y YC RF 1.16 / RH /16"-12 SAE 7/8"-14 SAE Y YC011-RF 1.16 / RH /4" NPT 1/2"NPT Y YC021-LF 1.55 / LH " NPT 1/2" NPT Y YC021-RF 1.55 / RH " NPT 1/2" NPT Y YC LF 1.94 / LH /16"-12 SAE 7/8"-14 SAE Y YC021-LF 1.94 / LH " NPT 1/2" NPT 2000 Taper Threaded End -.75 dia., 1.94 ext., 3.0 taper/ft., square keyslot, 5/16-24 x 1.12 tapped hole RPM 163Y YC RF 0.77 / RH 6 1 1/16"-12 SAE 7/8"-14 SAE /4 11 Tooth Spline Drive Shaft RPM Ports - End 163Y YC LF 1.94 / LH /16"-12 SAE 1 1/16"-12 SAE 2000

5 3/4 Straight Keyed Drive Shaft Tandem Pump RPM 194YC002101/15 163Y1051 5YC RM 1.94/RH 15.1 Second pump 1.55 / RH /16-12 SAE 7/8-14 SAE /16-12 SAE 7/8-14 SAE 2500 Webster YC Series Motors - Aluminum Body Webster YC Series Motors feature a 2 piece high-strength aluminum construction with heat-treated alloy steal gears and shafts. Standard features include double lip high pressure shaft seals, heavy duty sleeve bearings, and straight shafts. This pump is ideally suited where a lightweight, compact, and efficient motor is needed. 3/4 Straight Keyed Drive Shaft M058YC Y RF M077YC Y RF M194YC Y RF GPM rpm 0.58 / RH / RH / RH 42 Ports 1 1/16"-12 7/8"-14 SAE rear SAE rear /16"-12 7/8"-14 SAE side SAE side /16"-12 7/8"-14 SAE side SAE side 2000 Taper Threaded End.75 dia., 1.25 ext., 1.5 taper/ft., square keyslot, 1/2-20 x.88 ext. thread CID / Rotation RPM 163Y1161 M194YC RF 1.94 / RH /16"-12 SAE 1 1/16"-12 SAE 2000

6 Webster YC Series Motors - Cast Body - High Pressure This special Webster YC Series Motors features a 3 piece cast body construction with heat-treated alloy steal gears and shafts. Standard features include double lip shaft seals, heavy duty sleeve bearings, and straight shafts. This pump is ideally suited where a lightweight, compact, and efficient pump is needed. 3/4 Straight Keyed Drive Shaft Run around check valve 640 In Lbs. Torque! GPM / Max RPM 163Y1235 M116YCP BAC 1.16 / Bi 22/ /16"-12 SAE 1 1/16"-12 SAE 3500

7 CP Series Pumps - Single pumps Heavy duty CP pumps feature a 3 piece construction with aluminum pilot/ port block to keep them cost effective and cast body for high pressure. Heat-treated alloy steal gears and shafts. Pressure Balance for high efficiency and long life. CPB frames from 2.01 to 5.84 cu.in/rev. Capable of 3600psi continuous, 4500psi peak. Speeds up to 3000rpm, CPA frames from 3.95 to 9.89 cu.in/rev. Capable of 3000psi continuous, 4000psi peak. Speeds up to 3000rpm Shafts shown below Pilots shown below GPM RPM Side Ports Max SAE CID Inlet Outlet Rot. Mount Shaft CPB 023 L 2 AR CPB-1076 AW " Flange 1.25" Flange LH Bolt "B" CPB-1341 CPC-1038 CPC-1040 CPB CPB-1027 CPC-1041 CPB-1033 CPB 030 R 4 ## AL W/EXTD SHAFT /8-12 SAE 1 5/16-12 SAE RH Bolt "B" 1" keyed CPB 030 R 4 ZZ AR /8-12 SAE 1 5/16-12 SAE RH Bolt "B" 1" keyed CPC 030 L 2 AA BC /8-12 SAE Rear 1 5/16-12 SAE Rear LH Bolt "B" CPC 030 R 2 AA BC /8-12 SAE Rear CPB 040 L 2 AC AW " Flange 1.25" Flange LH Bolt "B" 1 5/16-12 SAE Rear RH Bolt "B" CPB 045 SPCL MODL PUMP /16-12 SAE 1 1/16-12 SAE LH Bolt "B" Tapered Threaded CPB 045 R 2 ES ** " Flange 1.25" Flange RH Bolt "B" CPB 045 L 2 AD AL /8-12 SAE 1 5/16-12 SAE LH Bolt "B" CPC 045 R 2 AD BC /8-12 SAE Rear CPB 050 R 2 AE AL /8-12 SAE 1 5/16-12 SAE RH Bolt "B" 1 5/16-12 SAE Rear RH Bolt "B" CPC 050 R 2 AE CPC-1047 BC /8-12 SAE Rear 1 5/16-12 SAE Rear RH Bolt "B" CPB 055 R 2 BI CPB-1411 AL /8-12 SAE 1 5/16-12 SAE RH Bolt "B" 1" keyed CPB 060 L 2 AZ CPB-1310 AW " Flange 1.25" Flange LH Bolt "B" CPA-1110 CPA-1203 CPA 060 R 5 AC BN " Flange 1.50" Flange RH " Dia. 14 tooth 4 Bolt "C" CPA 090 L 1 AN AU " Flange 1.25" Flange LH Bolt "C" 1.248" Dia. Keyed Special Taper Shaft

8 CP Series Pumps - Single pumps with Priority Flow Control Heavy duty CP pumps feature a 3 piece construction with aluminum pilot/ port block to keep them cost effective and cast body for high pressure. Heat-treated alloy steal gears and shafts. Pressure Balance for high efficiency and long life. CPB frames from 2.01 to 5.84 cu.in/rev. Capable of 3600psi continuous, 4500psi peak. Speeds up to 3000rpm. Includes Priority Flow Control and Relief Valve. Shafts shown below 2 Bolt SAE B Pilot CID Ports-Side Rot. Inlet Outlet Max RPM Shaft CPJ 032 L 2 ## CG /8-12 SAE 1 1/16-12 SAE Sec. & 24 w/ 4 GPM (Rear) 3/4-16 SAE Pri. (Rear) LH 3600 priority CPJ 026 L D 1 1/16-12 SAE Sec. & SPCL CD /8-12 SAE 3/4-16 Pri. LH 3600 CPJ-1007 CPJ-1007V CPJ-1020 CPJ-1031 CPJ 030 L 2 ## CB w/ 4 GPM priority 1 1/16-12 SAE Sec. & 22 w/ 6 GPM /8-12 SAE 9/16-18 SAE Pri. LH 3600 Priority CPJ 030 L 2 AA 1 1/16-12 SAE Sec ## /8-12 SAE (top) & 3/4-16 Pri. LH 3600 CPJ 026 L 2 AV CB CPJ 026 L 2 AV CB CPJ 030 R 2 SPE- CIAL 23 w/ 6 GPM Priority 1 1/16-12 SAE Sec. & 19 w/ 4 GPM /8-12 SAE 9/16-18 SAE Pri. LH 3600 priority 1 1/16-12 SAE Sec. & 20 w/ 4 GPM /8-12 SAE 9/16-18 SAE Pri. LH 3600 priority 1 1/16-12 SAE Sec. & 22 w/ 7.2 GPM /8-12 SAE 3/4-16 Pri. RH 3600 Priority CPJ 030 R 2 AA 1 5/8-12 SAE 1 1/16-12 SAE Sec. & 23 w/ 7.2 GPM CC (Rear) 9/16-18 SAE Pri. RH 3600 Priority.8567" Dia. 13 Tooth Spline 7/8" Dia. 13 tooth.8567" Dia. 13 Tooth Spline 7/8" Dia. 13 tooth 7/8" Dia. 13 tooth 7/8" Dia. 13 tooth 1" 15 tooth 7/8" Dia. 13 tooth

9 CP Series Pumps - Single pumps with Thru Drive Heavy duty CP pumps feature a 3 piece construction with aluminum pilot/ port block to keep them cost effective and cast body for high pressure. Heat-treated alloy steal gears and shafts. Pressure Balance for high efficiency and long life. CPB frames from 2.01 to 5.84 cu.in/rev. Capable of 3600psi continuous, 4500psi peak. Speeds up to 3000rpm, CPA frames from 3.95 to 9.89 cu.in/rev. Capable of 3000psi continuous, 4000psi peak. Speeds up to 3000rpm Shaft shown below Pilot and thru drive shown below CID CPB-2003 CPB 020 R 2 AU AN Inlet /8-12 SAE Ports-Side Outlet Rot. Max 1 5/16-12 SAE RH CPB-1092 CPB 023 R 2 AR AT " Flange 1" Flange RH CPB-1295 CPB 023 R 2 AR AQ CPB-1158 CPB 040 R 2 AC BN CPB-1162 CPB 040 L 2 AC AM /8-12 SAE /8-12 SAE /8-12 SAE 1 5/16-12 SAE RH /16-12 SAE RH /16-12 SAE LH CPB-1169 CPB 040 L 2 AH AS " Flange 1" Flange LH CPB-1109 CPB 045 R 2 AD AN /8-12 SAE 1 5/16-12 SAE RH CPB-1198 CPB 050 L 2 AE AZ " Flange 1.25" Flange LH CPA 060 R 1 AK BU (NO CPLG) " Flange 1.50" Flange RH CPA-1176 CPA 060 R 1 AC BA " Flange 1.25" Flange RH CPA-2004 CPA 070 R 2 AD BU " Flange 1.25" Flange RH CPA 080 R 1 AM BU (NO CPLG) " Flange 1.50" Flange RH RPM Mount Shaft SAE 2 Bolt "B" w/aux. "A" pad-9 tooth shaft SAE 2 Bolt "B" w/aux. "A" pad-9 tooth shaft SAE 2 Bolt "B" w/aux. "B" pad-13 tooth shaft SAE 2 Bolt "B" w/aux "A" pad-11 tooth shaft SAE 2 Bolt "B" w/aux. "A" pad-9 tooth shaft SAE 2 Bolt "B" w/aux. "A" pad-9 tooth shaft SAE 2 Bolt "B" w/aux. "A" pad-9 tooth shaft 1" 15 tooth SAE 2 Bolt "B" w/aux. "B" pad-13 tooth shaft SAE 4 Bolt "C" w/ Aux. "B" pad-13 tooth shaft 1.248" Dia. Keyed SAE 4 Bolt "C" w/ Aux. "B" pad-13 tooth shaft SAE 4 Bolt "C" w/ Aux. "B" pad-13 tooth shaft SAE 4 Bolt "C" w/ Aux. "B" pad-13 tooth shaft 1.224" Dia. 14 tooth 1.224" Dia. 14 tooth 1.248" Dia. Keyed

10 CP Series Pumps - Double Pumps Heavy duty CP pumps feature a 3 piece construction with aluminum pilot/ port block to keep them cost effective and cast body for high pressure. Heat-treated alloy steal gears and shafts. Pressure Balance for high efficiency and long life. CPB frames from 2.01 to 5.84 cu.in/rev. Capable of 3600psi continuous, 4500psi peak. Speeds up to 3000rpm, CPA frames from 3.95 to 9.89 cu.in/rev. Capable of 3000psi continuous, 4000psi peak. Speeds up to 3000rpm Shaft shown below Pilot shown below CID CPE-1047 CPH-1014 CPH-1094 CPB 032+, J DEERE, 310C 3.14/.86 CPB 023+, J DEERE, 210C 2.24/.86 Inlet 1.25" Flange 1.25" Flange Outlet Rot. Max 1 5/16-12 SAE & 3/4-16 SAE LH /6 1 1/16-12 SAE & 3/4-16 SAE LH /6 CPE L 2 BE 2 ZY 6 CP 5.84/3.4 2" Flange (2) 1 5/16-12 SAE LH /26 CPE L 2 AH 3 AA 1 AE 3.88/3.88 2" Flange (2) 1" Flange LH /30 CPH L 1 AA 1 AA 1 AA 3.95/ " Flange (2) 1.25" Flange LH /30 CPH L 1 AD 1 AK 3 AD 6.92/ " Flange (2) 1.50" Flange LH /30 RPM Mount Shaft SAE 2 Bolt "B" SAE 2 Bolt "B" SAE 2 Bolt "B" 1" 15 tooth SAE 2 Bolt "B" 1" 15 tooth SAE 4 Bolt "C" SAE 4 Bolt "C" 1.224" Dia. 14 tooth 1.224" Dia. 14 tooth Double Pump with Priority Flow Control CID CPB 040 L 2 ## ZU+22.4 W/2 LINE PFD Inlet 3.88/ /8-12 SAE Ports-Side Outlet Rot. Max 30/10 w/ 1 5/16-12 & 4 GPM 9/16-18 SAE LH 3600 priority RPM Mount Shaft SAE 2 Bolt "B".8567" Dia. 13 Tooth Spline