williams hydraulic pump model 40 quotation

Williams Model 40 Pump Flow 3.7 GPM 14 LPM @ 1000 RPM - Displacement/Revolution 0.9 cubic inches 14.7cc - Maximum Pressure 3500 PSIG 240 bar - Drive speed range 300 to 1000 RPM - Maximum drive speed 1000 RPM - Bi-al - Input Shaft 1" 2.54mm, keyed - Replacement Pump for 40 Series Bailey No. 250-542

Williams Model 40 Pump Flow 3.7 GPM (14 LPM) @ 1000 RPM - Displacement/Revolution 0.9 cubic inches (14.7cc) - Maximum Pressure 3500 PSIG (240 bar) - Drive speed range 300 to 1000 RPM - Maximum drive speed 1000 RPM - Bi-Rotational - Input Shaft 1" (2.54mm), keyed - Replacement Pumps for 40 Series Bailey No. 250-542

The Williams Machine and Tool Model 40 pump (PART # 9563) is ideal for applications requiring a pump in an efficient, neat package. These units are rugged and heavy duty. Features include:

The Williams 6004ERMH 3/4" Drive Steel Grip Electronic Torque Wrench offers English Ranges in 30-600 Ft Lbs & 360-7200 In lbs and a Metric Ranges of 40.7-813.5 Nm. The 3/4" digital torque wrench features dual side LED indicator lights to provide operation guidance. Add this electronic torque nut and bolt torque wrench to your work space today!

Williams Warranty Safety Hand tools are generally designed to perform one function do not use them improperly. Screwdrivers are not chisels, adjustables are not hammers and pliers are not intended to replace wrenches. Each of our product groups contains specific safety tips for proper tool usage. Additionally, wear appropriate clothing for the job, and always wear safety glasses. A special note on safety and use of hand sockets (chrome finish) with power drive (impact) equipment is a misuse of the tool and can result in serious injury.

Trademarks The following are trademarks of either Snap-on Technologies, Inc. or Williams in the United States, and some are registered in other countries. All other Williams trademarks, service marks, domain names, logos, and company names referred to in this catalog are either trademarks, registered trademarks, service marks, domain names, logos, company names of or are otherwise the property of Snap-on Technologies, Inc. or its affiliates. In countries where any of the Snap-on trademarks, service marks, domain names, logos and company names are not registered, Snap-on Technologies, Inc. claims other rights associated with unregistered trademarks, service marks, domain names, logos, and company names. Other product or company names referred to in this catalog may be trademarks of their respective owners. Williams® CDI Torque Products® Bahco ® SUPERTORQUE® Wms.® SUPER-WMS® SUPERECTOR® PALMSTER® SUPERADJUSTABLE® SUPERBLACK® PHILLIPS® SUPERCOMBO® TORX® SUPERSOCKET® POZIDRIV® SUPERRATCHET® ROBERTSON® SUPERRENCH®

Limited Warranty: Williams warrants that it’s products shall be free from defects in workmanship and materials for the usable life of the product. This warranty is limited to products purchased from authorized Williams distributors. Snap-on Industrial Brands, at its sole option, will repair, replace or grant a credit for product that does not comply with this warranty. The product must be returned to the Williams distributor from whom the product was purchased for warranty service. If the distributor is unavailable, the product should be returned to Williams, 6969 Jamesson Rd, Midland, GA 31820, freight prepaid. Include a contact name, phone number and a return address; please do not supply a post office box. Williams, does not provide any warranty for: 1) consumable products, 2) products subjected to abnormal use, 3) normal wear and tear of products. consumable products are goods reasonably expected to be used up or damaged during use. Abnormal use includes misuse, modification, neglect or lack of maintenance.

Toolbox Warranties: All toolboxes sold under the Williams brand will be warranted for a period of one (1) year from the date of purchase against defects in materials and workmanship. Any part(s) which are determined by Williams to be defective in material or workmanship, will be, at Williams discretion, repaired, replaced, or granted a credit. Any toolboxes that are to be returned, must be done through Snap-on Industrial Brands current Return Goods Policy, be sent back freight prepaid, and accompanied with a dated copy of the purchase order.

Ratchets: Warrantable ratchets purchased new will be replaced with new ratchets. All broken ratchets must be returned to Williams, 6969 Jamesson Rd, Midland, GA 31820 with a Returned Goods Authorization number (RGA #), freight pre-paid, in order to receive credit. Field destroyed ratchets will not be eligible for credit. TO THE EXTENT ALLOWED BY APPLICABLE LAW, THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, Williams AND ITS AFFILIATED COMPANIES SHALL NOT BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL COSTS OR DAMAGES INCURRED BY THE PURCHASER OR OTHERS. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or country. Williams, Warranty Information Center 6969 Jamesson Road Midland, GA 31820 Williams is a division of IDSC Holdings, LLC

Protect your equipment with an Ag Guard Extended Service Plan provided by Machinery Scope. Powertrain, Hydraulics, and/or Platform coverage options available for up to 3 additional years. Machinery Scope will follow up with your personalized quote.

The Darcy-Weisbach equation with the Moody diagram is considered to be the most accurate model for estimating frictional head loss for a steady pipe flow. Since the Darcy-Weisbach equation requires iterative calculation an alternative empirical head loss calculation like the Hazen-Williams equation may be preferred: h100ft = 0.2083 (100 / c)1.852 q1.852/ dh4.8655 (1)

Note that the Hazen-Williams formula is empirical and lacks a theoretical basis. Be aware that the roughness constants are based on "normal" conditions with approximately 1 m/s (3 ft/sec).

200 gal/min of water flows in a 3 inch PEH pipe DR 15 with inside diameter 3.048 inches. The roughness coefficient for PEH pipe is 140 and the length of the pipe is 30 ft. The head loss for 100 ft pipe can be calculated as

The Hazen-Williams equation is not the only empirical formula available. Manning"s formula is commonly used to calculate gravity driven flows in open channels.

The Hazen-Williams equation is assumed to be relatively accurate for water flow in piping systems when the water temperature is in the range 40 - 75 oF (5 - 25oC)and the kinematic viscosity is approximately 1.1 cSt

Since the Hazen-Williams method is only valid for water flow- the Darcy Weisbach method should be used for other liquids or gases. 1 ft (foot) = 0.3048 m

Ward Williams is proud to offer a Limited Warranty on each new Subaru sold at our Charlotte Subaru dealership! Love Us For Life is built upon our commitment to complete customer satisfaction. Learn more below and be sure to contact our Subaru dealership in Charlotte, North Carolina for complete details today!

Cylinder block, cylinder head, rotor housings and all internal parts within the engine including pistons, piston rings, rotors, wrist pins, crankshaft, eccentric shaft, main bearings, thrust bearings, thrust shims, thrust washer, thrust plates, connecting rods, connecting rod bearings, camshaft, camshaft sprocket, camshaft solenoids, camshaft bearings, followers, timing chain, timing chain gears, timing chain guides, timing chain tensioner, fixed timing gear, rotating timing gear, push rods, rocker arms, rocker arm shafts, balance shaft, hydraulic lifters, solid lifters, intake valves, exhaust valves, valve seats, valve guides, valve springs, valve spring retainer, valve keepers, valve stem seals, oil pump assembly, oil pump drive gear, pickup tube, bushings. Water pump. Seals and gaskets of Covered Parts.

Transmission case and all internal parts within the transmission including valve body, electronic shift solenoids, accumulator rings, accumulators, adjusters, bands, cvt belt, cvt chain, cvt pulley, bearings, bushings, oil pump, boost valve, center support chain, check balls, clips, clutch drums, clutch piston, automatic transmission clutches, control rings, counter shaft, throttle valve, , gear sets, governor, governor gear, output shaft, parking gear, planetary gears carrier, planetary gears, pressure regulator valve, pressure switches, ring gears, roll pins, separator plate, servo rings, servo sleeves, shift forks, shift rail, , snap rings, sprags, springs, sprockets, stator shaft, sun gear shell, sun gears, synchronizer hub, synchronizer keys, synchronizer ring, synchronizer sleeves, synchronizer springs, synchronizers, transfer shaft, band apply servo, parking pawl, center support, input shaft. Seals and gaskets of Covered Parts.

Towing - If a non-accident related tow is necessary, your disabled vehicle will be taken to the selling dealer. If your vehicle is more than 40 miles from the selling dealer, your vehicle will be taken to the nearest qualified repair facility.

* Coverage begins on the vehicle purchase date and expires on the date calculated by adding ten years to the vehicle purchase date or when your vehicle"s odometer reading reaches 100,000 miles or on the date you sell or otherwise transfer the vehicle to another person or entity, whichever comes first. A $100 deductible applies. This web page is not a Limited Warranty but rather an outline of the Limited Warranty coverage. Please refer to the Limited Warranty for complete coverage, terms, conditions, and exclusions. Does not apply to prior purchases or leased vehicles. Not all models qualify. See Dealer for Eligibility.

LONDON (Reuters) - The Williams Formula One team announced on Tuesday a switch to gearboxes and hydraulic components provided by engine supplier Mercedes from 2022 in a significant step for the struggling former champions who changed hands last year.

“Williams is an independent team, but Formula One is always evolving, and as a team we must be agile to react to the current climate in order to put the team in the best position to be competitive on track,” said principal Simon Roberts in a statement.

“For Williams, it makes sense to acquire the integrated powertrain after running our power units since 2014 and for our team, it makes sense in terms of economies of scale to supply another team under the new rules,” said the Austrian.

Williams driver George Russell also has a long-term contract with Mercedes and stood in for Lewis Hamilton in Bahrain last month when the seven times world champion tested positive for COVID-19.