wright stander hydraulic pump manufacturer

Most Wright mowers use hydraulic pumps instead of transaxles so we can position the operator and center of gravity for maximum stability. The axial piston pumps contain a rotating set of pistons. This variable flow type pump provides accurate control of flow and pressure at all times. The ZK and MMZ models use large body pumps that can pump as much as 16ccs per revolution. Stander X, Sport X™ and Large Frame Standers® use 12cc pumps. Walk behinds, Small Frame Standers®, Stander Intensity™ and Sport Intensity™ models use 10cc pumps.

Part of what makes Wright mowers great products start with its bones. The drive system consisting of wheel motors and the hydro-pumps are just a few of a mower"s vital parts. When it comes to the hydro-pump, Wright contracts only the best manufacturer, which is where Hydro-Gear comes into play.

Hydro-Gear® was established in 1991 and is located in Sullivan, IL. Hydro-Gear is a joint venture company between Sauer-Danfoss in Ames, Iowa and Agri-Fab, which is located in Sullivan, IL. Hydro-Gear is now the world"s most prominent designer in hydrostatic transmissions and has been for the past two decades. Their hydro-pumps are the industry"s leading hydro, piston pumps ever since Hydro-Gear"s humble beginnings 20 years ago.

The hydro-pump is a device that converts mechanical force and motion into hydraulic fluid power by producing flow through the machine. These hydro-pumps are designed to stand up against rugged jobs and built for superior production for any kind of mower. Hydro-Gear® offers five displacement pumps to fit every need of Wright"s mowers.

Wright promises a quality product, which is why it uses quality parts from Hydro-Gear®. To learn more about Wright Manufacturing or to schedule a demonstration, visit our Main site. You can also learn more about Hydro-Gear"s hydro pumps and wheel motors here.

Hydraulic wheel motors convert oil flow into precise axle speed and oil pressure into very high axle torque. Most Wright mowers use pump and motor drive systems instead of transaxles so we can spec a heavier duty system and still position the operator and center of gravity for maximum stability. Many wheel motors are compact enough to fit entirely inside the rear wheels. The Stander ZK™ uses a higher speed piston type motor that efficiently provides high torque through a planetary* reduction system. This Hydro-Gear™ 15cu-in H-Series motor also contains an internal wet disk brake and serves as the oil reservoirs. All other motors are simple and compact gerotor** type motors. Stander X, Sport X, Large Frame Stander® and MMZ use 15cu-in motors. Walk behinds, Small Frame Stander®, Stander Intensity, and Sport Intensity™ use 12cu-in motors. Keeping oil pressure down is critical to cool running and long lasting hydro systems (the higher the wheel motor displacement, the lower the system pressure).

All Wright Stander Hydraulic pumps at discounted prices with fast delivery. These quality pumps are made by Hydro Gear, the world leader in the manufacturing of precision drive systems for the turf industry.

Wright Stander Hydro Gear pump, 31490107 Fits Deck Stander X, Sport X models WSTX/WSPX, 48", 52", 61" serial # 56804 - Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for delivery...

Wright Stander Hydro Gear pump, 3149001 Hydro Gear is an OEM supplier - Hydro Gear is the leading manufacturer of precision hydraulic drive systems for commercial and residential lawn mowers. Pictures shown are for illustration puposes.

Wright Stander Hydro Gear pump, 31490011 Fits Stander Velke Mower Pistol Grip models WVP, 32" 36" 48" 52" SN 27543-47284- Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for delivery...

Wright Stander Hydro Gear pump, 31490012 Fits Stander Velke Mower Pistol Grip models WVP, 32" 36" 48" 52" SN 27543-47284- Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for delivery...

Wright Stander Hydro Gear Transaxle ZT 3400, 39410002 Fits Stander Mid mount Z models WZTO, 48" 52", 61" (ZT-3400 Transmission) Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for...

Wright Stander Hydro Gear Transaxle ZT 3400, 39410001 Fits Stander Mid mount Z models WZTO, 48" 52", 61" (ZT-3400 Transmission) Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for...

Wright Stander Hydro Gear pump, 314900154 Fits Stander Mid mount Z models WZ, 48" 52", 61" SN 31897- Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for delivery details at 617-694-1500...

Wright Stander Hydro Gear pump, 31490014 Fits Stander Mid mount Z models WZ, 48" 52", 61" SN 31897- Hydro Gear is an OEM supplier - Not All Hydro Gear pumps are in stock - contact us for delivery details at 617-694-1500...

Hydro static Motors are made by Hydrogear who is the OEM manufacturer for Wright Company, these are the same motors that are on the machine when they come off the assembly line.

Information - Please Read CarefullyWarranty:All Hydro Gear Pumps, Transaxles and Transmissions come with a 6 months parts and labor warranty from date of

Hydro-Gear’s commercial piston pumps are smooth and efficient. High-performing and maintenance-free, they feature fixed-displacement charge pumps and check or shock valves to provide an infinitely variable speed range between zero and full displacement in both forward and reverse modes of operation. With a wide range of options, find the perfect piston pump for your unique application.

Wright Stander 36490013-1 Hydro Oil -ﾠ According to Wright engineers, all hydrostatic oil is not the same. Thatﾒs why they recommend that owners of Wright mowers use the same durable hydrostatic oil when performing changes thatﾒs found in the mower when it leaves the factory floor. Wright dealers now make that easy by stocking genuine Wright hydrostatic oil by the quart or case. The part number is 36490013.

Wright has specified and offers this synthetic 15W-50 hydrostatic oil because it withstands higher temperatures and has better shear resistance properties than many other off-the-shelf oils. And it protects the system for longer intervals between changes. Wright engineers recommend that the oil and filter be changed annually, or every 500 hours, if the mower is used in cold or harsh weather conditions. They also recommend checking the owners manual for any oil change recommendations that may be specific to your Wright model.

We have all the parts that you need for your Wright commercial lawn mowers. We can service and repair just about all of your small engine & outdoor equipment at our Northeast location.

Wright pulleys are split steel construction for low inertia and cool running belts. Pulleys are made from a round disk of steel, and a rolling knife is very precisely rolled into the edge of the disk to form the perfectly round V groove. This method makes a pulley that conducts heat away from the belt quickly and, because it"s strong and approximately 20% less inertial* than a cast iron pulley, the clutch last longer. All deck pulleys are approximately 1"" larger than other brands, which significantly reduces belt tension and flex. Except for Stander B™ models, pulleys are mounted using taper lock hubs (They are impossible to remove unless you move the two small bolts to the other two holes to jack the pulley off the hub.).

Hydraulic wheel motors convert oil flow into precise axle speed and oil pressure into very high axle torque. Most Wright mowers use pump and motor drive systems instead of transaxles so they can spec a heavier duty system and still position the operator and center of gravity for maximum stability. Many wheel motors are compact enough to fit entirely inside the rear wheels. The Stander ZK™ uses a higher speed piston type motor that efficiently provides high torque through a planetary* reduction system. This Hydro-Gear™ 15cu-in H-Series motor also contains an internal wet disk brake and serves as the oil reservoirs. All other motors are simple and compact gerotor** type motors. Stander X, Sport X, Large Frame Stander® and MMZ use 15cu-in motors. Walk behinds, Small Frame Stander®, Stander Intensity, and Sport Intensity™ use 12cu-in motors. Keeping oil pressure down is critical to cool running and long lasting hydro systems (the higher the wheel motor displacement, the lower the system pressure).

Most Wright mowers use hydraulic pumps instead of transaxles so we can position the operator and center of gravity for maximum stability. The axial piston pumps contain a rotating set of pistons. This variable flow type pump provides accurate control of flow and pressure at all times. The ZK and MMZ models use large body pumps that can pump as much as 16ccs per revolution. Stander X, Sport X™ and Large Frame Standers® use 12cc pumps. Walk behinds, Small Frame Standers®, Stander Intensity™ and Sport Intensity™ models use 10cc pumps.

When it comes to the hydro-pump, Wright contracts one of the best. Hydro-Gear® was established in 1991 in Sullivan, IL and has been the world"s most prominent designer in hydrostatic transmissions for the past two decades. Their hydro-pumps are the industry"s leading hydro, piston pumps ever since Hydro-Gear"s humble beginnings 20 years ago. The hydro-pump is a device that converts mechanical force and motion into hydraulic fluid power by producing flow through the machine. These hydro-pumps are designed to stand up against rugged jobs and built for superior production for any kind of mower. Hydro-Gear® offers five displacement pumps to fit every need of Wright"s mowers.

Hydro Gear Part # PE-1HQQ-DP1X-XXXXPE SERIES is use in small engines, riding mower engines, tractor engines and other products that use Hydro-Gear. This part comes directly from Hydro-Gear. Hydro-Gear manufactures hydrostatic Transmissions and Transaxles, Piston Pumps and Wheel Motors. Using original Hydrogear parts to repair your hydro pump, transaxle or hydrogear transmission will ensure that you lawnmower transaxle or equipment perform at its best performance.

For proper ordering, reference Hydro Gear part number stamped on hydro pump. When ordering and replacing a hydro pump, it is always best to replace the wheel motor and lines, flush the tanks and install a new oil filter. Not doing so could cause the hydro pump to fail due to contamination in the system. *

Wright:SM Frame Stander W3215KAW, WS3215KCE, WS3215KCE, WS3215KOH, WS3215KOH, WS3216KAW, WS3216KAW, WS3216KAW, WS3217KAW-R, WS3217KAW-R-CE*Toro Commercial: 74534, 74534TE, 74536, 74536TE, 79534, 79536, GrandStand 36"

Hydro Gear Part # PE-1HQQ-DP1X-XXXXPE SERIES is use in small engines, riding mower engines, tractor engines and other products that use Hydro-Gear. This part comes directly from Hydro-Gear. Hydro-Gear manufactures hydrostatic Transmissions and Transaxles, Piston Pumps and Wheel Motors. Using original Hydrogear parts to repair your hydro pump, transaxle or hydrogear transmission will ensure that you lawnmower transaxle or equipment perform at its best performance.

For proper ordering, reference Hydro Gear part number stamped on hydro pump. When ordering and replacing a hydro pump, it is always best to replace the wheel motor and lines, flush the tanks and install a new oil filter. Not doing so could cause the hydro pump to fail due to contamination in the system. *

Wright:SM Frame Stander W3215KAW, WS3215KCE, WS3215KCE, WS3215KOH, WS3215KOH, WS3216KAW, WS3216KAW, WS3216KAW, WS3217KAW-R, WS3217KAW-R-CE*Toro Commercial: 74534, 74534TE, 74536, 74536TE, 79534, 79536, GrandStand 36"

Hydro Gear Part # PE-1HQQ-DP1X-XXXXPE SERIES is use in small engines, riding mower engines, tractor engines and other products that use Hydro-Gear. This part comes directly from Hydro-Gear. Hydro-Gear manufactures hydrostatic Transmissions and Transaxles, Piston Pumps and Wheel Motors. Using original Hydrogear parts to repair your hydro pump, transaxle or hydrogear transmission will ensure that you lawnmower transaxle or equipment perform at its best performance.

For proper ordering, reference Hydro Gear part number stamped on hydro pump. When ordering and replacing a hydro pump, it is always best to replace the wheel motor and lines, flush the tanks and install a new oil filter. Not doing so could cause the hydro pump to fail due to contamination in the system. *

Wright:SM Frame Stander W3215KAW, WS3215KCE, WS3215KCE, WS3215KOH, WS3215KOH, WS3216KAW, WS3216KAW, WS3216KAW, WS3217KAW-R, WS3217KAW-R-CE*Toro Commercial: 74534, 74534TE, 74536, 74536TE, 79534, 79536, GrandStand 36"

At Houzz we want you to shop for HYDRO-GEAR Hydro-Gear Pump for Wright Stander Mower & Other PE-1HQQ-DP1X-XXXX, 31490027 with confidence. You can read real customer reviews for this or any other product and even ask questions and get answers from us or straight from the brand. When you buy HYDRO-GEAR Hydro-Gear Pump for Wright Stander Mower & Other PE-1HQQ-DP1X-XXXX, 31490027 or any product product online from us, you become part of the Houzz family and can expect exceptional customer service every step of the way. If you have questions about HYDRO-GEAR or any other product for sale, our customer service team is eager to help.