zd1230 hydraulic pump in stock

So far, we are the only designated OEM hydraulic power unit motor supplier in China for US WAI Company, OEM forklift motor supplier for Korea SOOSUNG.Also, we cooperated Korea KOPACK and HELI in China.

· Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 4-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI; the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down.

· Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. Two additional SAE#6 connectors and one 15 ft remote control are included in the package.

· Reliable Quality: The dump trailer pump is made of sturdy plastic; thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with an overflow valve, it automatically releases when overpressure, safer and reliable.

· Rapid Start: With its powerful motor, this hydraulic electric pump is quick to start and quick to output oil; it can provide strong power for hydraulic systems like dump trailers, dump beds and is able to complete lifting in a short time.

· Wide Application: This power unit is widely used in stackers, small, and medium-sized lifting platforms. It is compatible with many dump trailers and movers and is a direct replacement for 12V DC remotely controlled hydraulic systems.

Pull the valve out of the pump and clean with parts cleaner as well, flushing the block. The cleaner will flow out of the tubes into your collection bucket.

Reassemble pump, reconnect hoses, and fill the reservoir with AW46 (hydraulic fluid) or Dexron III (automatic transmission fluid) and purge the system until it’s full. Be sure NOT to mix the two fluids. Only use one type.

First, Make sure your solenoid is properly grounded.  To ground the solenoid, run a small 14 gauge ground wire from the ground on the pump to the screw mounting the solenoid to the motor.

Step 3. To lower your spears, you will need two wires. Both wires will connect to the hot post on your solenoid. The end of one wire needs to connect to the plastic coil on the side of your pump.

Whether you are looking for a hydraulic pump, such as a piston pump, hydraulic pump motor, rotary pump, vane pump or gear pump, All World has you covered. We stock a vast number of hydraulic pumps for a wide range of applications. Our excellent Daikin pump line includes V Series, Piston Pumps, M Series Pump Motors, RP Series Rotary Pumps, Compact Medium-Pressure Vane Pumps, Medium-Pressure Cartridge Type Vane Pumps, and MFP100 Series Pump Motors.

We also cross and carry many brands of hydraulic pumps by Nachi, Tokimec, Yuken, Brother, Lube USA, NOP, Sumitomo, Teral, and Vickers to fulfill your needs.