zero turn hydraulic pump rebuild kit factory

I just called all around my local area asking for quotes to diagnose my issue and see if its a pump vs drive motor issue and what I could expect, ball park, to repair one or both. Its fair to say that it would cost just a $100 to diagnose and an additional $400-$1K to repair. All the shops I"ve talked with said they will not rebuild pumps or motors.

While calling around and talking to people my coworker has a vendor visiting with him and the vendor overheard me talking to these shops. He said he"s serviced commercial Toro hydrostatic systems for years. He said the wheel motors are not serviceable because of the fit-up of all the parts and once its opened up its all lost. He strongly recommended replacing wheel motors. He said the pumps can be rebuilt and are easy, takes about an hour. He said you can get everything you need for the pumps except the barrel cap and if they are bad then you"ll need a new pump.

The issue with my mower is once it gets warmed up the one side becomes weak. He suggested that I change my fluid and swap the wheel drives. If the issue follows the wheel drive then I have a drive motor issue. If the issue remains on the same side I have a pump issue.

Hydro Gear REBUILD KIT PK 12CC TURN OLD PUMPS TO NEW Exmark Lazer Z. If you clicked on my ad you most likely Have lost movement in one of your levers on your zero turn mower? maybe your mower is struggling going up a hill, or you have a hard time keeping a straight line.Maybe your mower has a hopping motion, or real touche. These are all signs of a worn pump. if you have a worn pump then save yourself money and rebuild what you have. This kit will rebuild those worn pumps and bring them back to new, while saving you hundreds of dollars and only takes a little bit of time. This kit is put together by professional hydro-gear rebuild company. In the kit you will receive everything to rebuild your PK series 12cc hydro gear pump. I have taken all the guess work out of rebuilding a pump, and its just a matter of doing some light reading and replacing your worn parts. This kit makes it very simple for most consumers. The kit fits many popular mower brands such as but not limited to, Scag, Exmark, Bobcat, Mtd, Wright Standers, Bad Boy, Hustler and more. Too find out if this kit fits you will need to find a white hydro gear tag located on your pump the number will start with PK. if you are unsure if this kit fits you pump please send me the numbers or a picture of the tag and I will confirm fitment for you. also please refer too the pics. Save money and turn your old worn-out 12cc pump to brand new again, you will get the speed and power back like it was from factory, and save hundreds of dollars at the same time. The kit will include new end cap, piston block, internal bearings and seal kit and access to a hydro gear repair manual also cleaning instructions and bleed off instruction put together by a master Technician. Kits usually ship in 2-3 days but could be up too 5 days depending on stock. They will ship priority mail to get it to you quick. If you are unsure if this kit fits please contact us with your hydro gear pump numbers. If you have different hydro gear pump that needs rebuilt please contact us and we will help you out. Please ask any questions. More are available upon request. Kit includes the following to rebuild 1 pk series pump. Older pumps will have a small (7/16" head) by-pass valve. This updated block will require a larger (5/8" head) valve. If this is the case you will need to purchase a updated by-pass valve that will not be included in this kit. If you need one please let me know after purchase I can provide new or used ones thank you. 1- HG- End Cap 1- HG- 12cc cylinder block (update) 1- HG- Seal Kit 1- HG- Shaft Bearing 1-HG- Thrust Bearing System cleaning & Bleed off procdure Contact info to my shop for questions

Core exchange means that you get rebuilt parts from Top Hydraulics" inventory first, and then you send back your original parts for a refund of your core deposit of $2000. For a full core refund, your pump must not show unusual, excessive damage.

Internal components and seals get upgraded, and the pump goes through extensive testing to make sure we ship back a product that is performing better than a brand new one from the factory, for a fraction of dealer price. Typical problems with original Ferrari California top pumps are leakage and overheating. Top Hydraulics takes care of the leaking and the overheating for good.

Is your top slowing down, lately, and starting to slam onto the front windshield? That would be a sign of fluid loss in the system, which typically starts at the pump. Check the fluid level on the reservoir. The reservoir is attached to the pump, located in the left side of the trunk. There are two horizontal lines on the fluid reservoir, representing the minimum and maximum fluid level. If the fluid level is below minimum, then you have a leak, and you need to take care of it. It will not get any better by itself, or with additives in the fluid. Additives will likely ruin your pump and cylinders.

Top Hydraulics will make your pump better than a brand new one for a fraction of Ferrari"s price. Please inquire about our low FedEx rates, both for shipping inside the US and internationally.

Note: in the unlikely event that there is extensive damage to your pump due to mishandling or from a prior repair attempt, additional charges may be incurred.

Do you need Eaton hydraulic pump repair, rebuild, or replacement? We specialize in Eaton pump repair and rebuilds. If you need a free estimate for any Eaton pump, get in touch with us today to find out how much it will cost for repairs.

We provide fast, reliable hydraulic pump repair service on all Eaton models. We are guarantee all repair work will be done with genuine OEM parts, so you know that you aren’t getting gray market or counterfeit parts.

Our team of skilled technicians will give your pump the attention it needs, and put it through our detailed inspection and repair process. Once the pump has been reassembled, we’ll test it thoroughly with our state-of-the-art-test equipment.

When you get your pump back, it will meet or exceed factory specs. Once you work with us, we think that you will keep coming back to us for all of your Eaton hydraulic repair needs, including Eaton hydraulic motors and Eaton hydraulic cylinders.

If you don’t see your model listed below, don’t hesitate to call or contact us. We service just about every model of pump that is available from Eaton and other manufacturers, including gear pumps, piston pumps, and vane pumps.

Eaton started making gear pumps for the aerospace industry in the 1960s. Today, their pumps are used in various mobile and industrial applications. Eaton works to create a compact, affordable pump by incorporating valves and controls into the pump itself. External Gear Pumps from Eaton that we provide service for include:

Eaton manufactures these pumps for medium-duty industrial applications. These products are marketed under the Vickers brand and can be used in machine tools, automotive plans, power generation plants, civil engineering, and many other industries. Eaton Vickers Open Circuit Piston Pumps that we provide service for include:

These Eaton pumps provide the flexibility to drive a broad range of fluid power systems. Based on designs from Vickers, these pumps can be customized to a wide variety of uses, including backhoes, skid steers, and boom lifts. We offer repair and service on the following Open Circuit Piston Pumps from Eaton.

Eaton’s Hydrokraft closed-circuit piston pumps are axial pumps with a cradle-type swash plat design. They are designed for closed circuit applications with integrated valves and filters. This provides an entire closed-circuit system in one unit. We offer repair and service on the following:

Vickers brand vane pumps from Eaton are fixed displacement pumps used in both mobile and industrial markets. They feature a cartridge kit that allows for easy repair and interchangeable parts between pumps. These pumps are used in combines, balers, mobile cranes, skid steers, presses, booms, lift trucks, and other types of machinery. We offer repair and service on these Eaton Vickers vane pumps:

When you are on the job and under a deadline and equipment fails, you need fast, reliable repair. We can send in our field technicians to get your Eaton pump back up and running as soon as possible. Our reliable, experienced team can perform diagnostic services and minor repairs for equipment and machinery used in many industries. Our team can travel throughout the United States and many international locations, including North America and South America.

If repairs cannot be made on-site to your Eaton pump, you can ship it to our facility. If you’re close enough, you can drop it off. We know how important it is to get your operations back up and running. So you can trust us to get your pump repaired and back to you as fast as possible, and working properly.

Eaton hydraulic pumps offer proven technology and design no matter what line of work you are in. From agriculture and aviation to energy and manufacturing, Eaton makes a hydraulic pump to fit your needs. And just in case your Eaton pump fails or isn’t performing up to expectation, we can fix it and make it just like new again.

Don’t see your Eaton hydraulic pump model number? Not a problem. Call 800-800-6971 or send us an email. Chances are we’ve worked on it before and have parts for it, even if it’s not listed on our website.

Has your pump started leaking? Sometimes a repair can be costly so we understand that you might want to tackle this repair yourself. For some, it"s easier to just replace the entire pump or transmission. That"s why we sell genuine Hydro Gear replacement pumps and factory built transmissions to make your life easier -- simply remove the old one and install the new part.

Feeling adventurous? Hydro-Gear transmission and pump rebuild parts like seals, gears, fans and rebuild kits are what we specialize in. We carry the Hydro-Gear transmission and pump rebuilding parts you need to get that trans-axle or pump back in action fast!