zf5 pto hydraulic pump manufacturer

Kozmaksan ZF Power Take OFFs designed for ZF series main transmissions. Kozmaksan ZF PTOs has Single&Double output models, Rear&Side Mounting type options and available for UNI&ISO mounting housing or suitable for flange connections.

As an industry leader in manufacturing PTO solutions in the work truck industry, Muncie Power Products prides itself on innovation. The FR6Q PTO for Ford F-350 to F-550 Super Duty trucks with the 6R140 transmission features a noise abatement mechanism that eliminates virtually all gear rattle noise to make it a quiet power take-off. The F20 PTO features the latest in noise reduction technology for Ford’s 10R140 10-speed transmission. The F22 PTO series is designed for applications utilizing the 10R140 transmissions in 2023 and beyond for Ford F-650 and F-750 diesel trucks. Muncie Power Products is here for any and all of your Ford PTO needs.

Clutch-dependent PTOs are fitted on the output end or laterally on the transmission housing. They only operate when the engine is running and the vehicle clutch is closed.

Drive-dependent PTOs are connected to the transmission output shaft. They are active as soon as the drive wheels of the vehicle begin to move. They supply the hydraulic system of dual-circuit steering systems with working pressure. This means that the vehicle can still be steered in the case of engine failure.

PTO, mechanical parts mounted on the exchange of industrial vehicles whose function is to withdraw the motor power to transfer it to other mechanical organs.

PTO, mechanical parts mounted on the exchange of industrial vehicles whose function is to withdraw the motor power to transfer it to other mechanical organs.

NOTE: The Gas 100 tank series may prohibit will not the mount remote on the mounting left side of due a hydraulic to interference pump on with the the Left reverse Hand idler side. bulge.

NOTE: If Gas there tank is may interference prohibit with the remote the exhaust mounting system of a at hydraulic the right pump hand aperture, on the Left use Hand assembly side. arrangement "5".

NOTE: Chelsea If there is pump interference model P16-45 with the thru-85 exhaust can system be direct at the mounted right hand to P.T.O.s. aperture, Larger use assembly pumps can arrangement not be direct "5". mounted due to interference with the transmission.

NOTE: Chelsea pump model P16-45 thru-85 can be direct mounted to P.T.O.s. Larger pumps can not be direct mounted due to interference with the transmission.

CAUTION: It is required by GM Truck that the 442 Series when mounted on the right side of the transmission must have the direct mount pump, with hard tubing coming out of the rear of

the pump, up and over the transmission output shaft, and a heat shield must be installed to cover the PTO and the pump. Order Kit number 329333X for complete pump and heat shield

CAUTION: installation parts. It is required by GM Truck that the 442 Series when mounted on the right side of the transmission must have the direct mount pump, with hard tubing coming out of the rear of

the pump, up and over the transmission output shaft, and a heat shield must be installed to cover the PTO and the pump. Order Kit number 329333X for complete pump and heat shield

NOTE: assembly There arrangement is a left and due right to exhaust PTO opening pipe interference. for GM/ ZF S6-650, "RC" field the conversion LEFT side kit aperture number can 328591-112X be used in ("XD" 4 x 2 vehicles. to "RC") There is a interference on the 4 x 4 vehicles due to the front wheel

NOTE: There is a left and right PTO opening for GM/ ZF S6-650, the LEFT side aperture can be used in 4 x 2 vehicles. There is a interference on the 4 x 4 vehicles due to the front wheel

NOTE: must use Parker a deep P16-45/65 mount housing, pumps can stud be kit mounted 328170-76X rearward and 7-A-125 and direct spacer to the to 442 mount series to the on adapter. the LEFT side if the PTO is a 3 assembly, (bulge up), has the XK or RC flange, and is the F, L, R,

NOTE: Parker P16-45/65 pumps can be mounted rearward and direct to the 442 series on the LEFT side if the PTO is a 3 assembly, (bulge up), has the XK or RC flange, and is the F, L, R,

CAUTION: It is required by GM Truck that the 442 Series when mounted on the right side of the transmission must have the direct mount pump, with hard tubing coming out of the rear of

adapter or U is to be used. Chelsea P16-45 and -65 pumps can be direct mounted rearward if the P.T.O. is a "3" assembly (bulge up), uses the XK pump not flange, a geared and adapter is the L,R,S is to or be U used. Chelsea P16-45 and -65

d (bulge down), an XK pump ratio. NOTE: flange All A other "5" is assembly combinations is shown will have here, interference but other assembly problems. arrangements Chelsea P16-45 may and work -65 better pumps depending can be on direct the mounted chassis setup, forward whether if a "4" or assembly not a direct is used mount (bulge pump down), is ratio. to be an All used, XK other pump and combinations flange whether is or will have interference problems.

used, and is the L,R,S, or U ratio. All other combinations will have interference problems. Other ratios, assemblies, pump flanges and pumps may work if a geared adapter is used, but the