10k kelly hose in stock

Kelly hose is used to connect the standpipe to the swivel. It allows the drill string to be raised and lowered while the drill fluid is pumped through it. Kelly line usually contains two layers of plated steel cables to reach 5000 psi operating pressure. Inside tube is made of special NBR to improve abrasion and corrosion capability. Rubber cover is compatible with the ozone, sunlight and oils for a long time. It is supplied with multiple end fittings – API flanges, threads, butt-welded union and other as specified.

Rotary drilling hose assemblyoften carries high-pressure drilling liquids from the top of the mud standpipe to the rotary swivel. Rotary hose, especially slim hose, is often used on small or medium-size drilling rigs such as water well operations, water well, water well core drill and other applications. Flexible rotary/drill hose can carry mud or air.

Our rotary hose is often equipped with API end fittings and available for 2000psi to 4000psi operating pressure. The lift eyes on the ends are designed to prevent kicking or crushing when handling.

Kelly drilling hoses are big inside diameter (3" to 4" ID) high pressure flexible lines used to between the standpipe and the swivel. This flexible piping permits the kelly to be raised and lowered while drilling fluid is pumped through the drill string. The simultaneous lowering of the drill string while pumping fluid is very important to the drilling operation.

We stock, fabricate, and assemble Rotary/Kelly, Vibrator, Choke & Kill and BOP Hoses right at our facility in Newcomerstown, OH. After assembly, we test each hose to 10,000 or 15,000 before it goes out the door.

In addition to the Texcel Oilfield and Hydraulic Hose lines, Buckeye BOP is proud to distribute Texcel for all of your Industrial Hose needs. With walk-in service available, it’s never too late to give us a call or stop in.

Onshore and offshore, today"s drilling environments demand the most advanced products, superior performance, and excellent service. Oil field hoses consists of High Pressure hoses, Rotary, Kelly, Vibrator, and Mud Pump hoses, Cementing hoses, Choke and Kill hoses, Blow Out Preventer (BOP) hoses, and Petroleum and Fuel Transfer hoses.

High pressure oil field hoses range from 2" ID up to 5" ID with a wide range of available end connections. These hoses are built strong and are designed to last.

Choke hoses and kill hoses are commonly grouped together as Choke & Kill hoses. These hoses are usually 2" to 3-1/2" ID armored hoses designed to survive those critical moments when a well experiences trouble. More dangerous environments commonly call for fire rated Choke & Kill hoses which can survive even longer if things really get out of hand.

Rotary drilling hoses which are commonly referred to as Kelly Hoses are used on the drilling rig as high pressure, flexible rubber, steel reinforced hoses used to connect the standpipe to the swivel or top drive. Made of heavy duty rubber and steel cables the rotary hose flexible piping allows the Kelly, the bit, and drill string to be raised and lowered while the drilling fluid is pumped through. The lowering of the drill string while pumping fluid is crucial to the drilling process and a durable reliable hose is a most. Usually made in diameters of 2", 2-1/2", 3", 3-1/2", and 4" ID"s and in lengths starting at 4ft vibrator hoses all the way up to 91ft.

Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

We have the ability to take your defective hydraulic hoses and fix it on the spot. With our vast inventory of hose sizes and connectors, we can look at your current hydraulic hose and then supply you with an exact match with the correct fittings. We have the ability to perform this specialized serviced at the following locations: Clewiston, Davie, Ft Myers, Miami and West Palm Beach.

We also have the ability to recycle and reuse your existing hose couplings from your worn out hose possibly saving you hundreds of dollars. In our installation process, we blow a foam through our hoses to flush out any metal filings that may reside in the new hose and form a protective coat to insure that your engine will not be contaminated.