kelly hose failure factory

Owing to over twenty years market experiences in supplying high-pressure flexible oilfield rubber hoses, Hebei Qianli Rubber Products Co., Ltd. has been an important partner of many famous customers including America, East Asia, Africa and other countries and regions in the world.

Oilfield drilling hoses are vital components for rig drilling systems. Rotary drilling hose, mud hose, cement hose, Kelly hose, vibrator hose are working under high-pressure. Once the hose failure, it will cause catastrophic damage to the equipment, body health and property. Our professional engineers can help you solve any problem in safe storage, handling and other technical problems.

Drilling hoses should work in harsh environments. Therefore, high performance such as abrasion resistance, pressure capacity and life expectancy should be paid much attention to when you select them. If you have any problem with the drill hoses, contact us – bond@hebeiqianli.com.

Our drilling hoses are equipped with API end fittings – flanges, NPT threads and butt-weld unions to meet requirements on the market. Bespoke end fittings are also available.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

13 Causes Of Hose Failure 1) Mis-application -Perhaps the greatest cause of failure is using a hose, fitting, or clamp in an application that it is not designed for.

2) Kinking at or near the fittings -Once the barb of the fitting cuts into the tube of the hose, the product being conveyed can escape into the reinforcement and eventually lead to bubbling or blistering of the cover within several feet of the end.

3) Temperature Exposure- As temperature increases pressure ratings decrease. Excessive hot or cold temperatures will lead to discoloration, cracking, or hardness - as well the build up of static electricity if hose wire has not been ground properly.

5) External damage to hose carcass -Kinks, crushed sections, and cover damage which exposes reinforcement will eventually break down the reinforcement and lead to a hose failure.

6) Exceeding the minimum bend radius -Kinking, crushing, or forcing a hose to bend beyond its minimum bend radius (measured from the inside edge of the hose, not the centerline). This is commonly seen on high pressure hoses or vacuum hoses.

7) Defective hose or improperly installed or selected clamp -Failure from a defective hose will typically occur in the first few hours of service, such as pin holes, blow-outs, or tube and cover separation. Improperly installed or selected clamps can result in the coupling ejecting from the end of the hose. Always confirm the manufacturer recommendations based on STAMPED information.

8) Tube or cover not compatible with fluids or environment -Usually results in discoloration, swelling, sponginess, or the breakdown of the hose carcass. For material handling hoses, always rotate to ensure even wear of the hose tube.

9) Old age -Hose is not ‘pipe’, it is a flexible component that will degrade over time. Shelf or service life will range from 1 to 20+ years, depending on its composition, application, and environment. Older hoses become discoloured, stiff, or burst at low pressures.

10) Incorrect hose length -Too short of a length does not allow the hose to expand/contract due to changes in pressure or temperature and causes excessive stress on the fittings or hose reinforcement.

11) Twisting hose during installation or service -Twisting a hose rather than naturally bending the hose will reduce life. It is estimated a 7% twist when installing a hose in a permanent application can reduce hose life by 90%.

12) Poor workmanship -Hose and fittings are made of a unique blend of different materials with complex manufacturing methods - human error, inconsistent machinery, or poor product quality or raw materials can result in defects or variances greater than allowable tolerances. As for failure at the end fitting, ends blowing off assemblies can be a result of sub-standard coupling procedures or due to the “mixing-and-matching” of incompatible hose, couplings, or clamps.

13) Contaminated media being transferred -Foreign particles or residue in the fluid or air can flow through the tube and break it down or wear it out prematurely. Always clean hoses prior to installing in field to ensure there is no cross-contamination.

Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

A rotary/pumper hose is used in oil well drilling. It acts as the crucial instrument in the connection being made between the standpipe and the swivel.

A rotary hose is also used as a means of permitting the kelly to be either raised or lowered through the drilling process while also allowing the drill bit to be raised with the drillstring. For this reason, it is also often referred to as a “kelly hose.”

Rotary hoses also function during the process that allows the drilling fluid to be pumped through the hose when the bit and drillstring are raised and lowered.

This process is imperative in the completion of the drilling process. The drillstring portion of the drilling line and the connection to the rotary hose is thus crucial.

A large-diameter (3- to 5-in inside diameter), high-pressure flexible line used to connect the standpipe to the swivel. This flexible piping arrangement permits the kelly (and, in turn, the drillstring and bit) to be raised or lowered while drilling fluid is pumped through the drillstring. The simultaneous lowering of the drillstring while pumping fluid is critical to the drilling operation.

Made of heavy rubber and steel cables the hose is basicly flexible piping that allows the Kelly and the bit and drill string to be raised and lowered while the drilling fluid is pumped through drill string.

lowering the drill string and pumping drilling mud is very important to the drilling process and when these hoses go down or fail in service a entire rig can shut down.

Made of heavy rubber and steel cables the hose is basicly flexible piping that allows the Kelly and the bit and drill string to be raised and lowered while the drilling fluid is pumped through drill string.

Rotary Drilling/Pumper hose is mainly used for conveying water-based or oil-based mud and other fluids in the working temperature of -30 °C to +82 °C.

The reinforcement is made from 2-8 layers of high tensile and high strength spiraled steel wire, making the hose have solid structure and resistant to high pressure.

The cover is made from high quality synthetic rubber, mainly chloroprene rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight.

A Kelly hose (also known as a mud hose or rotary hose) is a flexible, steel reinforced, high pressure hose that connects the standpipe to the kelly (or more specifically to the goose-neck on the swivel above the kelly) and allows free vertical movement of the kelly while facilitating the flow of drilling fluid through the system and down the drill string.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

We are global leader in the design, manufacture and supply of high pressure hoses.As drilling operation methods evolve, become deeper, with increasing pressure and higher temperatures,

We have over 50 years of experience in metallic reinforced bonded elastomer hoses and has been the first company to obtain certification for all three governing industry standards: API 7K, 16C and 17K standard.

We have since built up a broad portfolio for a variety of drilling applications, such as flexible choke & kill Lines, rotary & vibrator hoses, managed pressure drilling hoses to meet the needs of both onshore & offshore drillers and distributors.

Our key offering includes rotary drilling / vibrator hose grade D and E, choke and kill, cement and sour hoses. The supports the pumping of mud at very high pressure during drilling and exploration campaigns.

Protects the polymer lining from mechanical damage, prevents blistering in case of high pressure gas service and decompression with vacuum service, supports the wall of the flexible hose.

The lining material is selected to withstand chemical and heat effects of drilling mud, well effluents, cement slurry, hydraulic fluid or whatever substance is conveyed through the hose.

High-pressure mud hose also called rotary hose, vibrator hose or jumper hose, is used to convey drilling fluid from mud pump to the mud standpipe manifold on the drill floor.

You must pay your entire statement balance (including all promotional purchase and balance transfer balances) by the due date each month to avoid being charged interest on new purchases from the date those purchases are made, unless your new purchases are subject to a 0% interest rate.

At Kelly Motor Corp., an oil change is so much more than just an oil change. When you come in for The Works,® you receive a complete vehicle checkup that includes a synthetic blend oil change, tire rotation and pressure check, brake inspection, Multi-Point Inspection, fluid top-off, battery test, and filter, belts and hoses check — all for a very competitive price.

Belts and hoses play an integral part in your vehicle’s performance. As belts age, the rubber becomes brittle, causing it to crack. If a belt is showing signs of wear on its outer edge, this is also a sign that it will need to be replaced.

Since coolant temperature is about 200 degrees, the hoses that carry it are extremely important. A belt or hose failure can cause loss of both power steering and the electrical charging system, as well as an overheated engine. If your engine overheats, this can cause the cylinder heads to warp, resulting in a very expensive repair.

Hoses are generally inspected for softness and swelling, hardening, cracks, chafing and heat damage. If any of these issues are detected, your hoses will need to be replaced.

Your vehicle has rubber and metal brake lines and both can crack and leak. Our technicians will first examine the rubber hoses to ensure they are soft and don’t have cracks. They’ll then check the hard metal brake lines for corrosion and leaking. If either is damaged, replacement is recommended.

Flexible connection between standpipe andswivel (Rotary Drilling) or betweenpump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure inoil drilling and exploration work. Meets the high demands of directional drillingand down linking with negative pressure pulses and elevated temperatures. Thishose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drillplatforms. The Motion Compensator hose is not recommended for phosphateester fluids.

Available 24/7/365 with a 1-Hour ETA, PIRTEK’s on-site mobile hydraulic and industrial hose service is the fastest way to reduce or eliminate costly downtime due to a failed hose. PIRTEK has fully equipped Mobile Service Vehicles with a wide selection of hydraulic and industrial products and specialized equipment to cut, clean, tag, and crimp hose assemblies on-site.

Our professionally trained technicians offer on-site preventative maintenance and emergency hydraulic and industrial hose replacement. PIRTEK customers don’t need to leave their job site to replace a faulty hose with this service. Our technician will ensure your equipment is up and running before leaving the job site.

Construction is a tough job requiring tough equipment. Most essential equipment on any construction site relies on hydraulic or industrial hoses to keep operating. Our preventative maintenance and emergency hose replacement services are available 24/7/365.

Recycling saves production and energy costs and reduces the negative impacts that the extraction and processing of virgin materials have on the environment.Many pieces of equipment used in the recycling industry rely on hydraulic hoses.

Our hoses are made from robust and durable material to guarantee the quality necessary to keep the recycling industry operating. We take pride in our part in preserving and protecting our resources for ourselves and future generations.

Few things are more frustrating than a compactor stopping dead in its tracks because of a leaky hydraulic hose. With all the complex tools and equipment needed to dispose of waste properly, tough hoses are essential for getting the job done reliably. With PIRTEK, you can find suitable hydraulic and industrial hoses suited for your needs.

It isn’t news that production efficiency is critical in manufacturing projects. To keep those machines pumping, you need quality equipment that isn’t going to slow the process down. PIRTEK has what you need.

Trucks, oils, abrasive materials, there’s nothing gentle about transportation. That’s why you need equipment with durability to handle the job. PIRTEK’s industrial hoses are made with reinforced materials capable of withstanding demanding situations, offering a long service life.

The Earthmoving industry utilizes a wide array of machinery, some of which require unique fittings and hoses. We have an extensive range of hydraulic and industrial hoses, fittings, and adapters to work in conjunction with unique machinery.

At our PIRTEK Service & Supply Center, we offer custom machining and fabrication services that allow us to re-use or re-create those hard-to-find fittings or adapters, all while you wait.

Safety takes center stage when moving flammable content like oils and gasses. A bursting hose will not only send harmful chemicals seeping into the earth, but it will also put the lives and well-being of your employees at risk.

Don’t leave the safety of your employees and the worksite up to chance. Call your local PIRTEK today to schedule a preventative hose maintenance appointment.

Hoses used for transferring rough materials go through some of the most strain of any equipment at a worksite. You need durable, reliable equipment. Our reinforced hoses are abrasion-resistant. They move materials quickly, safely, and best of all, they’re built to last.

PIRTEK’s hoses were made to weather the wear and tear of material handling. With several options to choose from, we’ll have the proper hose for your needs.

With PIRTEK’s maintenance and replacement program, you can rest assured that your hoses are working efficiently and safely, ensuring your production continues smoothly.

Hose failure may lead to spills and environmental damage. Depending on local laws, spills will result in hefty fines or even jail time. Get your hands on quality PIRTEK equipment and ensure a safe environment.

Our professional training and products make PIRTEK the best choice for durable hoses that will stop contaminants from damaging the delicate ecosystem. Avoiding disaster is easy with PIRTEK.

Many PIRTEK locations carry high-performance automotive hoses and fittings for all your needs. We"re the Official Hose Supplier of Team Penske, INDYCAR®, and the Indianapolis Motor Speedway®!

PIRTEK’s products can considerably speed up your landscaping operations while keeping your staff safe. Our hoses can quickly move soil, water, and decorative stone materials, making them perfect for your job site.

PIRTEK has the most durable, reliable hoses on the market, and our professionally trained technicians are available for emergency on-site service 24/7/365.

In addition to the large selection of hoses and accessories we offer, many of our technicians have completed the MSHA 24hr safety training course. With this additional training, they can upgrade and modify the hoses on your mining equipment without the time and attention of your crew.

Many of PIRTEK’s hoses have been certified by the U.S. Coast Guard and have been reinforced to handle rough situations while retaining higher flexibility than others on the market. We also supply hydraulic and industrial hoses used in manufacturing fighter jets for the Air Force and hoses used by the Navy and the U.S. Marines. Whether it’s general maintenance, training, or active combat, your hoses must be reliable.

Reliability is king in high-stress environments. The last thing you need is for a hose to tear or burst at a critical moment. PIRTEK’s hoses are reinforced to ensure the product that reaches your hands is of a quality you can trust.

When crops are involved, it’s crucial to have reliable gear with a long lifespan. Industrial hoses serve many purposes here, including transferring water, gasoline, hydraulic fluid, and compressed air.