oem kelly hose quotation

The main advantage of a kelly hose is that it helps you move water from one point to another without much struggle. Hose pipes are also versatile and can be used for various activities in your home or at your workplace. Moreover, rubber horse pipes are durable since rubber is a strong material. This means that you won’t need to replace it often. Additionally, rubber hoses are less prone to cuts and abrasions. Another advantage of this hose pipe is that it absorbs shocks and vibrations. Also, there is no need for specialized bending or brazing since it can bend easily. Lastly, it reduces pressure surges and lubricates itself.

When buying a kelly hose, there are several factors that you need to consider, including length, couplings, thickness, and price. The length of the kelly hose is an important factor to consider. If you are taking the water to the furthest corner of your compound, consider getting a longer pipe for convenience. Also, if you are watering a large garden, a longer pipe will serve you better. Couplings or horse pipe fittings are also another important consideration. These are the accessories that help you connect your pipe to the water source. They can either be made from brass or plastic. Some people prefer plastic couplings since they are lightweight, but they can break easily. Brass fittings are heavier but long-lasting. Lastly, consider the thickness of the pipe. This refers to the number of layers used to make the kelly hose. Thickness determines the weight of the pipe and ease of bending.

For a wholesale kelly hose, visit Alibaba.com. This online shopping platform offers a wide range of rubber hoses that suits your needs. Visit the website at any time and place your order.

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

From 2003, Letone has always been committed to manufacturing rubber hose for 14 years, which provides high-grade and high-end rubber hose for the field of spaceflight and maritime industry, petroleum industry and highway, and PLA etc. Just as careful and elaborate rubber hose, LETONE has now become a high-tech enterprise integrating research, production, sales and services after years of steady development, shining brilliantly in the international market as an iconic enterprise among China"s rubber hose.

Onshore and offshore, today"s drilling environments demand the most advanced products, superior performance, and excellent service. Oil field hoses consists of High Pressure hoses, Rotary, Kelly, Vibrator, and Mud Pump hoses, Cementing hoses, Choke and Kill hoses, Blow Out Preventer (BOP) hoses, and Petroleum and Fuel Transfer hoses.

High pressure oil field hoses range from 2" ID up to 5" ID with a wide range of available end connections. These hoses are built strong and are designed to last.

Choke hoses and kill hoses are commonly grouped together as Choke & Kill hoses. These hoses are usually 2" to 3-1/2" ID armored hoses designed to survive those critical moments when a well experiences trouble. More dangerous environments commonly call for fire rated Choke & Kill hoses which can survive even longer if things really get out of hand.

Rotary drilling hoses which are commonly referred to as Kelly Hoses are used on the drilling rig as high pressure, flexible rubber, steel reinforced hoses used to connect the standpipe to the swivel or top drive. Made of heavy duty rubber and steel cables the rotary hose flexible piping allows the Kelly, the bit, and drill string to be raised and lowered while the drilling fluid is pumped through. The lowering of the drill string while pumping fluid is crucial to the drilling process and a durable reliable hose is a most. Usually made in diameters of 2", 2-1/2", 3", 3-1/2", and 4" ID"s and in lengths starting at 4ft vibrator hoses all the way up to 91ft.

For over 20 years our business has focused on Hydraulic Hose, Fittings, and Custom Tube Bending. In 2018 we expanded our service to Hydraulic Cylinders. We are capable of servicing any size cylinder with exceptional turnaround time. We accomplish this by investing in the most experienced people and by using the most advanced equipment available in the industry. As a result we are capable of rebuilding to OEM specs on all cylinders.

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.

You must pay your entire statement balance (including all promotional purchase and balance transfer balances) by the due date each month to avoid being charged interest on new purchases from the date those purchases are made, unless your new purchases are subject to a 0% interest rate.

At Kelly Motor Corp., an oil change is so much more than just an oil change. When you come in for The Works,® you receive a complete vehicle checkup that includes a synthetic blend oil change, tire rotation and pressure check, brake inspection, Multi-Point Inspection, fluid top-off, battery test, and filter, belts and hoses check — all for a very competitive price.

Belts and hoses play an integral part in your vehicle’s performance. As belts age, the rubber becomes brittle, causing it to crack. If a belt is showing signs of wear on its outer edge, this is also a sign that it will need to be replaced.

Since coolant temperature is about 200 degrees, the hoses that carry it are extremely important. A belt or hose failure can cause loss of both power steering and the electrical charging system, as well as an overheated engine. If your engine overheats, this can cause the cylinder heads to warp, resulting in a very expensive repair.

Hoses are generally inspected for softness and swelling, hardening, cracks, chafing and heat damage. If any of these issues are detected, your hoses will need to be replaced.

Your vehicle has rubber and metal brake lines and both can crack and leak. Our technicians will first examine the rubber hoses to ensure they are soft and don’t have cracks. They’ll then check the hard metal brake lines for corrosion and leaking. If either is damaged, replacement is recommended.

Drilling hose also called Oilfield drilling hose, rotary drilling hose, is hollow, thin-walled, steel or aluminium alloy piping that is used on drilling rigs. It is hollow to allow drilling fluid to be pumped down the hole through the bit and back up the annul-us. It comes in a variety of sizes, strengths, and wall thicknesses, but is typically 27 to 32 feet in length (Range 2). Longer lengths, up to 45 feet, exist (Range 3).

Oilfield drilling hoses have found their wide application in the extraction of minerals such as oil & gas drilling. With the help of the drill pipe, a drilling mud is injected into the well at a very high pressure, most often technical water, hydrogel solution or clay-based solutions. The drill hose is also used between oil tankers and drilling wells in the sea. Drilling hoses can be used on stationary and mobile drilling rigs, for drilling wells in the sea.

The drilling rotary hose is suitable for flexible connection between the top of the drilling riser and the swivel which can move vertically. It resists corrosion of hydrogen sulfide and can deliver water, oil, mud high‐pressure media.

Rotary drilling hose is mainly used for conveying water-based or oil-based mud and other fluids in the working temperature of -30 °C to +82 °C. It is often used for oil fields, cement repairing, geological exploration and water conveyance for coal excavation. It is composed of three parts: tube, reinforcement and cover. The tube is made from NBR, which is resistant to abrasion, corrosion and oils. The reinforcement is made from 2-8 layers of high tensile and high strength spiraled steel wire, making the hose have solid structure and resistant to high pressure. The cover is made from high quality synthetic rubber, mainly chloroprene rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight. The hose has longer service life as a result.

Cover: high quality synthetic rubber, mainly chloroprene rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight.

As drilling operation methods evolve, become deeper, with increasing pressure and higher temperatures, JYM can provide a range of drilling and cementing hose solutions to meet these challenging conditions.  Our key offering includes rotary drilling / vibrator hose grade D and E, choke and kill, cement and sour hoses.  The JYM range supports the pumping of mud at very high pressure during drilling and exploration campaigns.

JINYUAN RUBBER CO., LTD. has been an important partner of many famous customers including America, East Asia, Africa and other countries and regions in the world. Oilfield drilling hoses are vital components for rig drilling systems. Rotary drilling hose, mud hose, cement hose, Kelly hose, vibrator hose are working under high-pressure. Once the hose failure, it will cause catastrophic damage to the equipment, body health and property. Our professional engineers can help you solve any problem in safe storage, handling and other technical problems. Our drilling hoses are equipped with API end fittings – flanges, NPT threads and butt-weld unions to meet requirements on the market. Bespoke end fittings are also available. Hose quality is our life. It is our aim to provide constantly high level of quality. All production processes and procedures have been strictly inspected. The final inspection before shipment is the strictest and any inferior products are not allowed in our company. When you purchase our products, we will provide considerable after-sales service. If the drill rotary hoses fail in warranty time, they can be returned without costing you one cent of shipment.