oilfield term kelly hose supplier

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

Onshore and offshore, today"s drilling environments demand the most advanced products, superior performance, and excellent service. Oil field hoses consists of High Pressure hoses, Rotary, Kelly, Vibrator, and Mud Pump hoses, Cementing hoses, Choke and Kill hoses, Blow Out Preventer (BOP) hoses, and Petroleum and Fuel Transfer hoses.

High pressure oil field hoses range from 2" ID up to 5" ID with a wide range of available end connections. These hoses are built strong and are designed to last.

Choke hoses and kill hoses are commonly grouped together as Choke & Kill hoses. These hoses are usually 2" to 3-1/2" ID armored hoses designed to survive those critical moments when a well experiences trouble. More dangerous environments commonly call for fire rated Choke & Kill hoses which can survive even longer if things really get out of hand.

Rotary drilling hoses which are commonly referred to as Kelly Hoses are used on the drilling rig as high pressure, flexible rubber, steel reinforced hoses used to connect the standpipe to the swivel or top drive. Made of heavy duty rubber and steel cables the rotary hose flexible piping allows the Kelly, the bit, and drill string to be raised and lowered while the drilling fluid is pumped through. The lowering of the drill string while pumping fluid is crucial to the drilling process and a durable reliable hose is a most. Usually made in diameters of 2", 2-1/2", 3", 3-1/2", and 4" ID"s and in lengths starting at 4ft vibrator hoses all the way up to 91ft.

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.

Reinforcing our capability to meet the growing demand forLarge Diameter Hose (LDH), JGB Enterprises, Inc. has decided to expand our production capabilities to include 12” crimping.

With our continued development and support of the energy exploration market, JGB Enterprises, Inc. has invested in the Techmaflex PES-500 Large Bore Hose Assembly Machine.

We feel this investment will lead the energy exploration market to the next level. We also look forward to this investment opening more opportunities in markets where the need for safety of crimped large diameter hoses exists.

The main advantage of a kelly hose is that it helps you move water from one point to another without much struggle. Hose pipes are also versatile and can be used for various activities in your home or at your workplace. Moreover, rubber horse pipes are durable since rubber is a strong material. This means that you won’t need to replace it often. Additionally, rubber hoses are less prone to cuts and abrasions. Another advantage of this hose pipe is that it absorbs shocks and vibrations. Also, there is no need for specialized bending or brazing since it can bend easily. Lastly, it reduces pressure surges and lubricates itself.

When buying a kelly hose, there are several factors that you need to consider, including length, couplings, thickness, and price. The length of the kelly hose is an important factor to consider. If you are taking the water to the furthest corner of your compound, consider getting a longer pipe for convenience. Also, if you are watering a large garden, a longer pipe will serve you better. Couplings or horse pipe fittings are also another important consideration. These are the accessories that help you connect your pipe to the water source. They can either be made from brass or plastic. Some people prefer plastic couplings since they are lightweight, but they can break easily. Brass fittings are heavier but long-lasting. Lastly, consider the thickness of the pipe. This refers to the number of layers used to make the kelly hose. Thickness determines the weight of the pipe and ease of bending.

For a wholesale kelly hose, visit Alibaba.com. This online shopping platform offers a wide range of rubber hoses that suits your needs. Visit the website at any time and place your order.

New rubber compounds, higher working pressures and temperatures, stricter environmental and safety regulations – all make hose selection a challenge. At Gates, we make it easy. That’s because our line of high pressure oilfield hoses are made with the demands of today’s drilling methods in mind. From rotary-vibrator drilling hoses to choke and kill hoses, find oilfield hoses built tough to handle the pressure.

A large-diameter (3- to 5-in inside diameter), high-pressure flexible line used to connect the standpipe to the swivel. This flexible piping arrangement permits the kelly (and, in turn, the drillstring and bit) to be raised or lowered while drilling fluid is pumped through the drillstring. The simultaneous lowering of the drillstring while pumping fluid is critical to the drilling operation.

The space around a pipe in a well bore, the outer wall of which may be the wall of either the bore hole or the casing; sometimes termed the annular space.†

A heavy, flanged steel fitting connected to the first string of casing. It provides a housing for slips and packing assemblies, allows suspension of intermediate and production strings of casing, and supplies the means for the annulus to be sealed off. Also called a spool.†

A device fitted to the rotary table through which the kelly passes. It is the means by which the torque of the rotary table is transmitted to the kelly and to the drill stem. Also called the drive bushing.†

A hole in the rig floor 30 to 35 feet deep, lined with casing that projects above the floor. The kelly is placed in the rathole when hoisting operations are in progress.†

The hose on a rotary drilling rig that conducts the drilling fluid from the mud pump and standpipe to the swivel and kelly; also called the mud hose or the kelly hose.†

A vertical pipe rising along the side of the derrick or mast. It joins the discharge line leading from the mud pump to the rotary hose and through which mud is pumped going into the hole.†

A rotary tool that is hung from the rotary hook and traveling block to suspend and permit free rotation of the drill stem. It also provides a connection for the rotary hose and a passageway for the flow of drilling fluid into the drill stem.†

The top drive rotates the drill string end bit without the use of a kelly and rotary table. The top drive is operated from a control console on the rig floor.†

The complexities of the oil and gas industry can make keeping up with all the terms and definitions related to drilling difficult. To simplify things, we’ve compiled a glossary of the most important terms related to drilling and to the oil and gas industry.

A test of oil mud to determine if the aniline point temperature (aninline point) of the oil will damage elastomers (rubber compounds). The aniline point corresponds to the amount and type of hydrocarbons found in an oil sample, so a low aniline point indicates higher aromatics, and vice versa.

Also known as “As Is, Where Is” and “In Its Present Condition”, “As Is” states there are no guarantees about the condition or usage of the property. The buyer is responsible for determining its condition and use cases.

Paid to the lessor by the lessee, this consideration extends the oil and gas lease terms when there is no operations or production. The payment typically gives the lessee another year, however, if no payment is made and operations cease, the lease is considered abandoned.

Also called a dip meter or dip log, this surveying method determines the direction and angle of a formation dip in relation to the borehole to provide geological structure of the formation.

Transmits fluid and rotational power from the kelly bushing to the drilling collar. As the name suggests, the drill string is a column, or string, with attached tool joints.

Used by geologists to determine the nature of rocks, a special tool is used in an uncased hole that outputs electrical current into the rock and records the rock’s resistance.

A long hollow steel bar that’s used to connect the upper end of a drill string. Kelly bushing is a sleeve in the rotary table that allows the Kelly to freely move up and down during drilling. Kelly bushing also plays a part in the measurement of well depth, as well depth is measured from the Kelly bushing, down to the bottom of the well.

A contract between the mineral owner and the company interested in drilling that gives the interested company rights to explore and produce oil and gas for a specified term. The lease is usually given for royalty payments in return.

The machine used to drive rotational power to the drill stem while still allowing vertical movement of the pipe for rotary drilling. Most moden rotary machines have a rotary or master brushing used to turn the kelly bushing, which then allows vertical movement of the kelly while the stem is turning.

The NRP Jones oil field product offering consists of several different product lines including the Powerflex Rotary & Vibrator, Fireflex Blowout Preventer Hose, Trioflex Slim Line Rotary, Service Line Oil Field Products, and a vast array of hydraulic products for use in oil field applications.