rotary kelly hose in stock

Flexible drilling rubber hoses play an important role in petroleum extraction. They should suffer high operating pressure, extreme operating temperature, abrasion and other inferior elements. Our special compounded synthetic rubber has been proven an effective and economical way to reject these problems. All our oilfield drill hoses are manufactured as API 7K or other related specifications.

Steel cable reinforcement loads most working pressure up to 15,000psi. The wires are usually zinc-plating or copper platting to improve steel wire resistant against rust and corrosion. Due to the thick reinforcement, the hoses should be handled or stored in correct way to avoid kicking or crushing. They will substantially decrease their rated operating pressure.

Rotary hose, Kelly hose, cement hose, mud hose, jumper hose and vibrator hose and choke & kill hoses are the most popular oilfield rubber hoses. They convey high-pressure drilling fluid from one place to another. Many end fittings are provided to satisfy different applications. Most end fittings are made according to API standards. Special order is also available.

Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

Flexible connection between standpipe and swivel (Rotary Drilling) or between pump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure in oil drilling and exploration work. Meets the high demands of directional drilling and down linking with negative pressure pulses and elevated temperatures. This hose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate ester fluids.

Kelly drilling hoses are big inside diameter (3" to 4" ID) high pressure flexible lines used to between the standpipe and the swivel. This flexible piping permits the kelly to be raised and lowered while drilling fluid is pumped through the drill string. The simultaneous lowering of the drill string while pumping fluid is very important to the drilling operation.

ISO 9001:2000 certified custom manufacturer of abrasion, oil & weather resistant reinforced hose with tubes, covers & fittings for rotary drilling & exploration work. Hose are available in various models with specifications including 2 1/2 in. to 5 in. ID, 3.06 in. to 8.90 in. OD, 5 ft. to 100 ft. length, 2500 psi to 7500 psi rated working pressure, 48 in. to 72 in. minimum bend radius, 3 in. to 6 in. API thread, 2 in. to 3 in. NPT thread, minus 40 degrees F to plus 200 degrees F operating temperature & 3.9 lbs. to 43.6 lbs. weight/ft.

Flexible connection between standpipe andswivel (Rotary Drilling) or betweenpump and standpipe (Rotary Vibrator) for pumping mud at extra high pressure inoil drilling and exploration work. Meets the high demands of directional drillingand down linking with negative pressure pulses and elevated temperatures. Thishose can also be used as a Motion Compensator hose for stabilization of rotarydrilling and pumping equipment against vertical wave action on offshore drillplatforms. The Motion Compensator hose is not recommended for phosphateester fluids.

We stock, fabricate, and assemble Rotary/Kelly, Vibrator, Choke & Kill and BOP Hoses right at our facility in Newcomerstown, OH. After assembly, we test each hose to 10,000 or 15,000 before it goes out the door.

In addition to the Texcel Oilfield and Hydraulic Hose lines, Buckeye BOP is proud to distribute Texcel for all of your Industrial Hose needs. With walk-in service available, it’s never too late to give us a call or stop in.

A large-diameter (3- to 5-in inside diameter), high-pressure flexible line used to connect the standpipe to the swivel. This flexible piping arrangement permits the kelly (and, in turn, the drillstring and bit) to be raised or lowered while drilling fluid is pumped through the drillstring. The simultaneous lowering of the drillstring while pumping fluid is critical to the drilling operation.