bellows mechanical seal pricelist

A Bellows seal does not have a secondary seal that must move along the shaft or sleeve to maintain seal face contact. The secondary seal is static state at all times, even when the pump is in operation.

Primary seal face wear is typically accommodated by welded metal or elastomeric bellows which move to assist in the compression of the rotary to stationary seal faces.

Bellows seals allow for high and low temperature applications when used in conjunction with metal bellows. They do not require a rotating secondary seal, which means it is not prone to secondary seal hang-up or fretting along the shaft or sleeve.

... dual pressurized gas barrier metal bellows seal utilizing APGS non-contacting seal face technology. Welded metal bellows eliminate dynamic O-ring hang-up in a compact ...

LATTYseal U 6812 offers an instantaneous interchangeability of the rotating face permitting multiple use and cost reduction. Wide spectrum of rotating ...

... 425 ºC;• Inconel bellows available;• Cartridge easy to install;• Metal bellows provide better faces alignment;• Does not have dynamic gaskets;• Self-cleaning;• Adapts to API standard pumps;• Available ...

Cartridge seals for critical, toxic and emission control applications, where single seals are notaccepted;• Built-in pumping device improves barrier fl uid cooling;• Springs locations prevents contact ...

Burgmann H74-D Mechanical Seal called as PC04 are specialized in mechanical seals products. This device gives double seal and it can be rotated in any ...

FLEX MECH-Seal(china)Co.,ltd. is spent significant time in mechanical seals items including for auto cooling pump mechanical seals,for car air-layer ...

The PTFE bellows type mechanical seal, manufactured by Chinabase Machinery, can operate on a temperature range of -45°C up to 250°C on a pressure ≤1.2 Mpa and speed of ≤15 m/s. The stationary ...

The mechanical seals are designed to deliver excellent twin directional sealing performances in general purpose machines and are geared to operate in low to medium pressure applications. They are equipped ...

The MTM 51 series is an elastomer bellows type mechanical seal developed by Microtem. It is mainly used for general services machinery at low and medium pressure. This double directional ...

The MICROTEM double directional mechanical seal is with a single cylindrical spring is unbalanced and i elastomer bellows. It is used for general services machinery at low-medium pressure ...

The PK Seal features a single spring rubber bellows that will not wear the shaft or sleeve. It fits into shallow stuffing boxes and the flexible rotary face floats to compensate for misalignment.

... performance, the Type 1 elastomer bellows seal is widely recognized as the industry"s workhorse. Suitable for a wide range of service conditions ranging from water and steam to chemicals and corrosive ...

The BDFI™/BDFC™ (Bellows Double Flow Induction/Convection) is an innovative modular hybrid design, created using the inboard design of a BQFD™ and the outboard ...

Mechnical seal type 5030 / 5031 »with rubber bellowssingle-actingnon-anisotropicAreas of usestandard pumpwaster water pumpsupply engineeringgeneral industrial usemass production seal

Robust bellow seal with non-DIN cross-section, available inthree standard DIN working lengths and with stationaries to suitall common European housing sizes.

Elastomer bellows mechanical seal is identified by the use of a unique elastomer bellows or diaphragm for the secondary sealing part, which provides a high degree of axial flexibility to compensate for lack of concentration of the shaft & misalignment & wear due to thrust movement of the shaft.

Elastomer bellow seal is the most commonly and generally used rubber bellow seal, due to its compact design, easy installation, mass production and low cost.

Elastomer seal is non-directional, technically advantageous and extremely versatile. Elastomer bellow seals can be used regardless of the direction of the rotation since the driving torque is not transmitted through the single coil spring. The required driving torque is enhanced through the rubber bellow which fits on the shaft through the interference fit between the collar, rubber bellow, and shaft.

So as to meet the varying demands of our overseas customers, we are involved in manufacturing and supplying a collection of high-quality rubber bellow seals with competitive price, no minimum quantity.

Because of its excellent performance in various industries, as well as it’s compact design, cheap price and variety, rubber bellow mechanical seals are the most commonly used industrial seals.

Elastomer bellow seals are widely used in the centrifugal pump, water pumps, circulation pump, submersible pumps, auto cooling pumps, general industrial pumps and other rotating equipment, high-temperature applications of various chemical, petroleum, refinery and polymer industry.

Bellows Mechanical Seal are a type of mechanical seal where the spring element is a bellows. This eliminates the need for a secondary dynamic seal e.g o-rings. Bellows Mechanical Seals are also known as non-pusher seals as they have a static secondary seal which stays in place against the shaft, sleeve or on the gland of the pump.

A bellows mechanical seal is used where a dynamic seal is deemed unsuitable for the application e.g high temperature medium slurry or high seal hysteresis.

The primary mechanical seal functions exactly the same as a standard mechanical seal except the spring element is now being replaced with a bellows. The friction from the dynamic seal (e.g o-ring) is not a consideration.

However if a bellows mechanical seal should fail it can be due to several reasons such as; poor wielding, product particulate getting into the bellows and causing the spring element to fail, chemical and/or abrasive attack or over-pressure.

If you have any query around how to install bellow mechanical seals for pumps or have some concerns around the seal failures, why not contact one of our seal specialists below to discuss it in more detail and find out how we can help solve your issues and get your process back up and running reliably again.

(1) When the temperature of the conveying medium is too high, too low, or contains impurity particles, is flammable, explosive, or toxic, corresponding measures such as sealing, washing, cooling, and filtering must be taken.

(4) Before operation, first open the medium and cooling water valve, check whether the gas in the sealed cavity is completely discharged to prevent leakage caused by static pressure, and then start the operation.

Many tools can seal used when installing mechanical sealals that are not readily available, Alibaba.com offers a variety of mechanical seal tools that can seal used when installing mechanical sealals. This seal is not only for mechanic, but they are also in need of this material.

The many benefits of mechanical seals are that they offer, as they are less resistant to wear and tear on all occasions. Mechanical seals are the most durable, and seal option for those that require a lot of water and air at the same time.

Hydraulic seals are ideal for those that require higher pressure to maintain. On the other hand, the plunging seal is a common choice of mechanical seals, such as those with OKO"s, they all use the same functions of water and gas.

The PSS Shaft Seal is a mechanical face seal. The sealing surface is created between the flat surfaces of the rotating stainless-steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the front side of the bellows with hose clamps, and the back end of the bellows fits over the stern tube and is secured with hose clamps. The stainless-steel rotor is fitted on the shaft in front of the carbon flange. The stainless-steel rotor compresses the bellows before the rotor is secured to the shaft with set screws. This compression (pre-load) maintains constant contact between the two flat faces of the stainless-steel rotor and carbon flange, allowing the PSS to compensate for the variable fore and aft movement due to propeller thrust. In addition, the carbon flange is over-bored to the shaft diameter allowing it to float around the shaft and thus compensate for most misalignment and vibration problems. The stainless-steel rotor is sealed to the shaft by two O-rings recessed into the collar"s bore. These O-rings rotate with the shaft and stainless-steel rotor and do not experience wear during operation.

Blessed and supported by the team of high skilled and talented personnel, our company is considered as one of the leading manufacturers and exporters of Mechanical Bellow Seals.Widely accredited for its excellent quality and durability, our gamut of bellows is made in compliance with the national and international standards. We are offering these supreme quality Mechanical Bellow Sealsto our clients in varied technical specifications and that too at competitive prices.

With the support of our proficient workforce, we are regarded as one of the most prominent traders, suppliers and exporters of Metal Bellow Seal. These metal seals renowned for their properties features such as dimensional accuracy, easy installation and high tensile strength. Our offered range of bellow seals is used in processing pumps of chemical, petrochemical industries & refinery industry. Metal Bellow Seal is available at cost effective prices in the market.

John Crane brings you the world’s most complete selection of performance-proven edge-welded and formed metal bellows sealing products used in a wide range of rotating equipment such as pumps, compressors, mixers, and agitators. Our experience in diverse industries such as oil & gas, petrochemical, chemical, refrigeration compressor, pharmaceutical, food processing, pulp & paper, and more have proven the soundness of John Crane’s metal bellows design.