brandt mud agitator parts pricelist

BRANDT D-SANDER  TYPE SR-2, SR-3BRANDTEA1282.203.BRANDT.0016GASKET,6″,VICTAULIC P584-10AG FOR STYLE 75,77,78(BRANDT PN 10AG) (CROSS REF 1282.203.0220)10

The skid mounted MA-RG agitator is compact, and its low profile reduces headroom requirements and provides more layout space on top of the tanks. The gearbox is a triple-reduction helical-bevel gear drive system that reduces the rotational speed of the motor to drive the impeller(s). Up to 95% mechanical efficiency helps reduce horsepower requirements.

Impellers are available with flat blades (radial flow), contour blades (axial flow), and canted blades (radial/axial flow). The impellers are sized according to tank volume and expected duty. Active mud system compartments—such as solids removal sections, mud mixing sections, and slug pits, which need a higher shear force to produce immediate mixing—are another consideration in impeller sizing.

DrillingParts.com is in no way affiliated with the companies referenced in this website. References and/or mention of company names or the accompanying computer code are for ID purposes only and are not Trade Marks or Trade Names used by or affiliated with DrillingParts.com. Although under affiliate program agreements, DrillingParts.com may earn on qualifying purchases completed through third party associates such as Amazon, eBay and our marketplace vendors.

Searching oilfield parts such as directional drilling stuff, power tong components, drilling rig clutches, handling tools, triplex mud pump parts, blowout preventer seals, oil drilling pressure valves?

—–Liners——Mission Ceramic Liner——Mission Supreme Liner—–Piston Rods——Blak-JAK HydrA-LIGN Piston Rod System——Mission Self Aligning Piston Rod—–Pistons——Mission Green Duo Piston——Mission Slip Seal Bullitt Piston——Mission Supreme Piston——Mission Blue Lightning Piston——Mission White Lightning Bonded Piston——Mission White Lightning Slip Seal Piston—–Valves and Seats——Mission FK-1 Valve——Mission FK-N Valve——Mission Roughneck™ and Roughneck™ HP——Mission Service Master II——Mission Silver Top Valves and Seats——Mission Super Service Vavles and Seats——Service Master Drilling Valve——Supreme Valve and Seat—–Fluid End Modules and Accessories——Fluid End Accessories——-Blak-JAK Torque Pro——-Blak-JAK Torque Pro Lite——-Mission Bushing X-tractor——Liner Retention Systems——Modules (Mission L 7500 Module)—–Fluid Transfer Systems——Brine Filtration System——Centrifugal Pump Unitization Configurations——Custom Cooling Solutions——High Pressure Wash down Systems——NOV Mission Potable/Sanitary Water Pressure Sets——Resources—–Handling Tools——Adapter Rings——Air Operated Elevators——-A-Series Collar Type——-G-Series 18 Degree Center Latch——-Y-Series Slip Type——BHAT——Bushings——-Casing Bushings——-Casing Spiders——-MBH 1250——-MDSP Series——-MPCH Series——-MSPC Series——-MSP Series——-Roller Kelly Bushings——Casing Running Tools——-CRT 350 and 500 Casing Running Tool——Custom Dies and Inserts——Elevator Spiders and FMS——-BJ-250——-BJ-350——-FMS-275——-FMS-375——-V-1000——-V-500——-V-750——Hydraulic Elevators——-BX-3——BX-4-35——BX-4-50——BX-4-75——BX-5——BX-7——BXS Series——H-SJH Type——UX Horse Shoe——Links——-Perfection Links——-Weldless Links——Manual Elevators——-A-Series Collar Type——-DC Dolly——-G-Series 18 Degree Center Latch——-S-Series Auxiliary——-SBX7——-X-Series Collar Type Side Door——-Y-Series Slip Type——Manual Tongs——-HT Manual Tongs——Power Slips——-Power Slip Frame——-PS-15 Power Slip——-PS-16 Power Slip——-PS-21 Power Slip——-PS-30 Power Slip——-PF495 Power Slip——-SLT——Power Tools——-KS-6600——-KS-6800——-SSW-30——-SSW-40——-TW-61 Hydraulic Torque Wrench——Rotary Support Tables——-RST375——-RST495——-RST495 False——-RST495 Heavy——-RST495 Without Slip Ring——-RST605——-RST605 False——-RST605 Heavy——-RST605 Without Slip Ring——-RST755 Without Slip Ring——Slips——-CMS-XL——-DCS Series——-MP Series——-SD Series——-Type C——-UC-3——Resources——-BX Elevators TMS 1 of 2——-BX Elevators TMS 2 of 2——-Handling Tools TMS——-Rotary Support Table TMS—–Hoisting——Drawworks——-AHD Drawworks——–AHD-1000 Active Heave Drilling Drawworks——–AHD-1250 Active Heave Drilling Drawworks——–AHD-500 Active Heave Drilling Drawworks——–AHD-750 Active Heave Drilling Drawworks——-Drilling Drawworks——–AC Gear Driven Drawworks———ADS-10T AC Electric Gear Driven Drawworks———ADS-30Q AC Electric Gear Driven Drawworks———SSGD-1000 AC Gear Driven Drawworks———SSGD-1250 AC Gear Driven Drawworks———SSGD-360 AC Gear Driven Drawworks———SSGD-500 AC Gear Driven Drawworks———SSGD-750 AC Gear Driven Drawworks——–DC Chain Driven Drawworks———1625-UDBE DC Chain Driven Drawworks—–Iron Roughnecks——AR3200 Automated Iron Roughneck——HydraTong™ ARN-270——HydraTong™ MPT-270——Iron Roughneck Accessories——-Casing Module——-Hydraulic Mud Bucket——-Pipe Doper System——Resources——ST 100 Iron Roughneck——ST-120 Iron Roughneck——ST-160 Iron Roughneck——Jacking and Skidding——-Jacking Systems——-Jacking Claw Skidding Systems——-Rack and Pinion Skidding Systems——-Toggle Gripper System ——Lifting and Handling——-Market Segments——–Construction———SUBSEA CONSTRUCTION VESSEL———PIPELAY AND CABLELAY VESSEL———WINDMILL INSTALLATION VESSEL———CRANE VESSEL/ LIFT BOAT———IMR / WELL INTERVENTION VESSEL———ANCHOR HANDLING VESSEL——–Drilling———DRILLSHIP———JACK UP———SEMI SUBMERSIBLE———-FPSO/FPS———-SEMI SUBMERSIBLE/ SPAR/ TLP———-JACKET/ FIXED INSTALLATION——–Production———-FPSO/FPS———-SEMI SUBMERSIBLE/ SPAR/ TLP———-JACKET/ FIXED INSTALLATION——-Product Catalogue——–Anchor Handling Systems———Anchor Handling and Towing Winch———Anchor Handling Equipment Package———Secondary Winch——–Cranes———Next Generation Subsea Knuckle Boom Cranes———Box Boom Cranes———-Knuckle Boom Crane———-Single Boom Crane———-Telescopic Boom Crane———Lattice Boom Cranes———-Around the Leg Crane———-DNS Crane———-MSB Crane———-OC L Crane———-Unit Crane———Heavy Lift Cranes———-Around the Leg Crane———-MSB Crane———-Post Crane———-Tub Mounted Crane———Other Cranes———-A-Frame———-Stevedoring Cranes———Subsea Cranes———-Subsea Box Boom Crane———-Subsea MSB Crane——–Hose Loading Stations——–Mooring Systems———Mooring System for Drilling Units———Mooring System for Production Units——–Pipe Lay and Cable Lay Systems———Cable Lay Systems———Pipe Lay Systems———Tensioner———Upending Control Systems——–Riser Pull In Systems——Motion Compensation——-Crown Mounted Compensators (CMC)——-Direct Line Compensators (DLCs)——-Drill String Compensators (DSCs)——-N-Line Tensioner system——-Resources——-Tensioners——Offshore Units——-Drillship——-Fixed Platforms——-Jackup Rig——-Semi-submersible——-Well Intervention——Pipe Handling——-Horizontal Pipe Handling——–Catwalk Machines——–Catwalk Shuttle——–Pipe Deck Machines (PDM)——–Pipe – Riser Gantry Cranes——–Pipe Transfer Conveyor (PTC)——–PipeCat™ Laydown System——–Robotic Arms———DFMA-P——–DFMA-U——–UHT——-Horizontal-To-Vertical Pipe Handling——–Custom Dies and Inserts——–Hydraulic Mousehole——–Service and Access Baskets——-Pipe Handling Accessories——-Pipe Handling Cranes——-Resources——-Vertical Pipe Handling——–Racking Systems———PRS 4i/HR III———PRS5,6/HR IV———PRS8i and Hydraracker XY (HRXY)——–Standguard——Power Systems——-Hydraulic Power Units——-Motors——-Resources——-Energy Recovery——–Rotary Tables——Rotating Equipment——Structures——-Derricks——Top Drive Systems——-Fixed Electric Top Drives——-Resources——-Washpipe Systems

KOSUN shale shaker screens are available for the FLC Series. Brandt VSM, Cobra Series, Swaco Mongoose and KEM-TRON shale shakers, and we accept customized shale shaker screen, we has been the leading China OEM supplier of quality, high performance screening surfaces for over 20 years.>>Send an Enquiry sales@adkosun.com<<

Brandt, A Varco Company PO Box 2327,2800N. Frazier Conroe, TX 77305-2327 Phone 936-756-4800 Fax 281-272-2245

PRODUCTDESCRIPTION I NOTES, CAUTIONS AND W ARNINGS 2 REACHING BRANDT ,.,.,.,.., "...",.,.." , 2

9 PARTS ".."".".".".""."..."""""".."..." "..".." 20

BRANDT WORLDWIDE LOCA TIONS 51

-ii -1 IntroductionProduct Description MA-seriesAgitators are heavy-dutymechanicalmixers for viscousfluids. Severalmodelsare availableto meet a variety of mixing applications. The nomenclatureused by Brandt for mesemodels is asfollows:

The MA-series Agitators are very compact. Their low profile reducesheadroom requirementsandprovidesmore layout spaceon top of the tanks. The 1:1height-to-widthratio resultsin a lower centerof gravity providing stability and safetyshould the impeller encountera sudden shock Ion Thiscoupled with the action of the wonn gearbeing more resiStantto shock and vibration givesa morereliableunit than thoseusing helicaland bevelgears. The sliding action of the wonn and gearinsuresquiet smooth,vibration-freeoperation.

Each MA-series agitatorusesa shaft-mountedimpellerto maintaina homogeneousmixture of liquidsand solids within a tank. Impellers are availablewith cantedblades(axial flow) or flat blades(radialflow), and installedin singleor multiple configurationsto provide the desiredresults.The impellershaftis suspendedfrom, and attachedto the output shaft of the low profile skid mounted gearbox.Thegearboxusesa wonn-wonn geardrive systemto reducethe rotational speed of the explosion-proofmotor to drive the impeller(s).

MA-series Agitators are available in models ranging from 3 to 30 horsepower. hnpellers range from 20incl1es(508 mm) diameter to 52 incl1es(1321 mm) diameter. Flat blade impellers are recommended fortanks less than five feet (1.5 m) in depth. Canted blades are used in tanks deeper than five feet (1.5 m).A combination of both types is often mounted on a single shaft in tanks greater than 15 feet (4.5 m).

-1Repairs: This sectioncontainsdetailedproceduresfor repair,overhaul,and refurbishingyour Brandtproduct.Parts: This section contains lists of spare and replacement parts, and any specialtools needed.

Addendum: This section contains assembly and component drawings to help you locate, identify, a."1dorder replacement parts. Pertinent infonnation regarding perfonnance or technical specifications mayalso be included here.

Reaching BrandtIf you needadditionalinfonnaUon,pleasecall your local Brandtrepresentative.H you cannotlocatealocalrepresentative, pleasecallus atthe nmnberlisted on the coverof this manual.

-2-2 SafetyThank you for purchasingBrandt equipment. All Brandt products are designedfor manyyears ofdependableperformance with proper maintenanceand care. This manual contains detailedinformation on the proper installation,operation, maintenance,and repali" for the Brandt MASeriesAgitators.

The presenceof a Brandt representativeat the site does not relieve the owner/operator ofresponsibility to follow published installation, operation, and maintenanceinstructions.

I.3 Unit DescriptionGeneral DescriptionMA-seriesAgitators are heavy-dutymechanicalmixers for viscousfluids and are availablein modelsranging from 3 to 30 horsepower. Each MA-series Agitator consistsof a shaft-mountedimpeller,motor, gearbox,andmounting base. Electricalcontrols,specialcoatings,sealedbases,and other optionsareavailable.

The motors used on Brandt mud agitators are explosion proof, T-frame, three-phase electric motorsdirecrJycoupled to the gearbox using a flexible coupling with a solid steel guard Motors are available formost voltage/frequent}" requirements. Other electrical code styles and temperature ratings are alsoavailable.

NominalRatings: 230V/460V 60Hz - 1800rpm 190V/380V 50Hz - 1500rpmGearboxThe gearboxis a single reduction wonn-wonn geardrive, reducingthe motor speed (1800 rpm @60 Hz / 1500 rpm @ 50 Hz) to the agitator speed(60 rpm / 50 rpm respectively)in a single30:1reduction. The gearboxcontains an output shaft, two seals,and four to six bearingsin addition tothe wonn-wonn gear. The bearings are generously spaced to minimize shaft vibration anddeflection, and seals are readily obtainable standard sizes. Unlike many competing agitators,Brandt"s gearboxrequires no manual lubrication of the bottom output bearing.

When an agitatoris used in an extremelydeeptank, over 15 feet (4.5 m) deep,multiple impellerscan be mounted on one shaft. Usuallythe upper impeller(s)will be cantedblade,and the bottom impeller will be a flat blade. ContactBrandt engineeringfor properimpeller smng and stabilizerrequirements.

-9-Impeller ShaftBrandt MA-series agitatorimpeller shafts are manufacturedof solid, mild steel. The impeller shaft iscoupledto the gearboxwith a rigid coupling. All shaftsarekeyedto adjustthe height of the impeller.

Shaft length is determined by tank depth. When ordering impeller shafts, always specify theactual tank depth. Tank depth is defined as the distance from the bottom surface of the tank tothe top of the agitator support beams.

Bottom shaft stabilizerA bottom shaft stabilizeris requiredin deeptanksto reducesideloading on the gearboxbearings.Thestabilizeralsoprotectsthe agitatorshaft and impeller when auXl1iary equipmentis canied insidethe mudtank during rig moves. MA-3 Agitators requirea bottom stabilizerin all tanks 6 feet (1.8 m) or deeper;all otherMA-seriesagitatorsrequirea bottom stabilizerin tanks8 feet (2.4m) or deeper.

OptionsThere are severaloptions availablefor Brandt MA-series Agitators. Popular options include specialpaint fmishesor other coatings,remote startersand other elecrricalcontrols, and specialduty motors.Contactyour Brandtsalesrepresentative to disCUss which optionsmaybe right for your application.

-10- Available models Brandt MA-seriesAgitators are availablein severalmodels,from 3ill to 30 ill. The following table liStSthe physicalspecificationsfor theseunitS.

Routine Maintenance Checklist Your BrandtMA-seriesagitatoris designedfor yearsof dependableservicewith routine inspectionand maintenance. Pleaserefer to the Routine MaintenancedIecklist locatedin the Addendum sectionfor routine maintenanceinstructions. Additional copiesof this checklistshould be placedcloseto the unit for qW~ reference.

The MA -series agitator should be kept in a cool city place. The gear box should be filled with oil and the gear box input shaft should be rotated 30 times once a month. When taken out of storagethe gear box oil should be changed.

ISYMPTON I POSSIBLE CAUSE lff?9LUTION Agitatorwon"t run No Power d1eck Power

Tripped breaker 01~ Voltage,ch~ that agitatorshaft not dragging on bottomstabilizer

Agitator makes grinding High speednoise Replaceworn bearings noIse Low speednoise Replace drop bearing or thrustbearing

Agitatorvibrating coupling Ali~ mot?r coupling. See repaIrseCtIon

Msali-gnea-motor-19-9 PartsGeneral notesRecommendedsparesare for typical operating conditions. Choose oil applicableto temperaturerequirements.Oil is soldin 5-gallon(18.9-liter)unitsonly.

0 1.) Check oil level with agitator OFF: Oil should be level with the bottom of 2 7 the "oil level" hole. DO NOT OVERFill! 2.) Impeller rotation: The impeller " should rotate clockwise when viewed from top. 3.) Oil FillNent Plug: Vent plug must be clear of any obstruction to prevent pressure build-up and possible seal ,d damaQe. 4.) Agitator should operate with no 5 vibration. 5.) Check rubber insert on input shaft coupling for wear and cracks. 6.) Change oil** after first four days of ~... operation. DAILY OJ 7.) Inspect oil seals for leaks. Seals are self-lubricating and a slight seepaoe is normal. 8.) Keep motors clean and ventilation -! opening clear of mud blJild-up or 6 other debris. 9 9.) Check impeller shaft coupling for prODer make-UD. 6 PERIODIC ~ 10.) Check oil level. 11.) Lubricate the top bearing with one shot of approved bearing grease* every four days of running time. DO NOT OVER LUBRICATE! 12.) Change oil every three months Lubricate* motors every three f==[

@Brandt, A TuboscopeCompany P.o. Box 2327 .2800 N. Frazier Conroe,Texas,USA 77305-2327 A TuaescePE CeMPANY Telephone409-441-0006 Fax 409-756-8102

U"Ii NOTES; ,. TANK DEPTH IS DEFINEDAS THE DISTANCEFROM THE TANK BOnOM TO THE TOP OF THE AGITATOR SUPPORT BEAMS. 2. REOUIRED.IF THE TANK DEPTH IS EOUALTO OR GREATERTHAN B FT. 3. SECUREMUD AGITATORBASE BY WELDING TO TANK. & 4. SEE PI9B09 FOR IMPELLERMOUNTINGLOCATIONS

REV. ECN NO. DATE OWN. CHK"D. TITLESHAFTAND IMPELLER ASSEMBLY BUSINESS PROPRIETARYTHIS INFORMATION IS THEPROPERTY OF TUBOSCOPE vrn:o INTERNATIONAl M A -3 MUD A G I TAT 0 R1Nt. AND IS NOT TO BE COPIED.DISClOSEDOR USEDFOR ANY PURPOSEOTHERTfM THE PURPOSEFOR WHCH IT HAS BEEN SUBlimED w~ OWN. DC DATE11.10.92 DRAWING NO. REV.PRORWRmENPER~ISSION BYTUBOSCOPE vrn:o INTERNATIONAl INC. CHK"O. DATE APP.O.TCA DATE 1,. , 2.92 PI 50 79 1 BILL OF MATERIAL ITEM QTY. DESCRIPTION PART NO. n- 1 2 WORM & BEARING WORM GEAR 30: 1 20:1 INPUT i 45MLi~H gAG 2 BEARING OUTPUT gAP 1 OIL SEAL INPUT 10AH oJ 2 OIL SEAL OUTPUT lOAF 1 OIL PLUG VENTED 42AF 1 OIL LEVEL PLUG 42Z 8 1 OIL DRAI~Pl~G- 42AD I 1 (lS"F TO 50"F) 46J 46A lOlL 5 46L 468I 46M_46Z

ECN NO DATE OWN. CHK"D. TITlE GEAR REDUCER PROPRIETARY RIGHTS ARE INCLUDED IN THE INFOR~TlON DISCLOSED HEREIN. NEITHER THIS DOCU~EHT NOR THE INFOR~A1K)N DISCLOSED REPLAC EM ENT P ARTS HEREIN SHALL BE REPRODUCED OR TRANSFERRED TO 01HER DOCU~ENTS ~ ~~ 1 ~ ~~ I "CAW""" "",., gn, OR DISCLOSED TO OTHERS FOR MANUF~RING OR FOR ANY PURPOSE I OWN. DC !OAT[ 11-9-92 ,DRAWING NO"1 REV. EXCEPl AS SPEClnCALlY ALITHORIZED IN WRITING BY THE BRANDT CO~PANY.lCHK"D. A OtVlSK>N OF DREXEL OIlfiElD SERVICES. INC. I APP"O. -;-~ IDAT[ P 15 0 8 0 I 0J_9J~! NOTES: 1. TANK DEPTHIS DEFINEDAS THE DISTANCEFROM THE TANK BOnOM TO THE TOP OF THE AGITATOR SUPPORT BEAMS. 2. REQUIRED.IF THE TANK DEPTHIS EQUALTO OR GREATERTHAN8 FT. 3. SECUREMUD AGITATORBASE BY WELDING TO TANK. &"4. SEE PI9B10 FOR IMPELLERMOUNTINGLOCATIONS

1 10835 09.16.98 KA A TUBOSCOPE COMPANY REV. ECN NO. DATE OWN. CHK"D. TITLESHAFTAND IMPELLER ASSEMBLY BUSINESS PROPRlnARYTHISINFORMAOONIS THE PROPERTY Of" TUBOSCOPE vrn:o INT£RNA~ MA-5 MUD AGITATOR1Nt. AND 5 NOT TO BE COPIED. D5CLOSEDOR USED FOR ANY PURPOSEOTHERTHAN THE PURPOSEFOR WHICHIT ~ BEEN SUBUmED WI~UT I OWN. :C DATE 11.10.92 iDRAWING NO. REV.PRK)RWRITTENPERMISSIONBY TUBOSCOPE VETCt) INTER~TlO~ INC. ICHK"D. APp.D. TCA 1DATE DATE 11.12.92 PI 508 1 1 BILL OF MATERIAL

t< -~~~ (\Ir--.. i: ~~~m ..-0 , ~ 5 ~~~~~~,~c~ ;.eo. "~,""UCZ- .."~i~~ r; ~~~~:~ i 1 , mill iI"I NOTES: 1. TANK DEPTH IS DEFINED AS THE DISTANCE FROM THE TANK BDnOM TO THE TOP OF THE AGITATOR SUPPORTBEAMS. 2. REQUIRED. IF THE TANK DEPTH IS EQUAL TO OR GREATER THAN 8 FT. 3. SECURE MUD AGITATOR BASE BY WELDING TO TANK.

1 10835 09.16.98 KA A TUBOSCOPE COMPANY REV. ECN NO. DATE OWN. CHK"D. ,TrTLESHAFTAND IMPELLER ASSEMBLY BUSINESSPROPRIETARY THISINrOR~TK)NIS THEPROPERlY OF"TU~PE V£TCOINTER~~ M A -7.5 MUD A G I TAT 0 R INC. AND5 NOTTO BE COPIED.DISClOSEDOR USEDFORANYPURPOSE OTHERT~ THEPURPOSE rOR WHICHIT HASBEENSUBMITTEDWIn«>UT OWN. DC DATE1 1.10.92 DRAWING NO. REV. PRORWRITTENPERMISSIONBY TUBOSCCPE VETCO INTER~TlONAl INC. ICHK"D. DATE IAPP"D. TCA DATE 11.12.92 PI 5083 1-c"==[ BILL OF MATERIAL PART NO.1 :"_45P/458- 90 9U I

A Division of Drexel Oilfield Services, Inc. 2800 North Frazier P.O. Box 2327 Conroe Te~os 77305 ECN NO. DATE CHK"D. TITlE GEAR REDUCER I PROPRIETARY RIGHTS AREINCLUDED IN THEINFORMATION DISCLOSED I HEREIN.NEITHER THISDOCUWENT NORTHEINFORWA1ION DISCLOSED R E P LA C E MEN T PAR TS I HEREIN SfiAI.l BE REPRODUCED DR TRANSFERRED TO 01HERDOCU~EHTS ,- ~ ..~ -_. ORDISCLOSED TO OTHERS EXCEPtAS SPEClnCAlLY FOR MANUFACtURING A~RIZED IN WRITING OR FORANYPURPOSEI DWN. BY THEBRANDTCO~PANY~CHK"D. DC !DATE -- P 15 0 8 4 IDATE11-1Q-_92 ,DRAWINGNO. .! I REV.

NOTES: - r- -; , C21B 1SV 3K ,. TANK DEPTH IS DEFINED AS THE DIISTANCE FROM C1021 930 THE TANK BDTTOMTO THE TOP OF THE AGITATOR h:=- SUPPORTBEAMS. 2. REOUIRED, IF THE TANK DEPTH IS EOUAL TO OR GREATERTHAN8 FT. 3. SECURE MUD AGITATOR BASE BY Y(ELDING TO TANK. I--- & 4. SEE P198"1 FOR IMPELLER MOUNTING LOCATIONS

1 10835 09.16.98 KA A TUBOSCOPf COM PA,NY REV. ECN NO. DATE -- HAFT AND IMPELLER~ASSEMBLY .s~~~ TITLES I BUSINESS PROPRIETARY THIS INroRMATX>N IS THE PROPERTYOf TUBOSCOPE VETCOINTER~roNAl MA-10 MUD AGITATOR INto AND IS NOTro BE COPIED,DISCLOSED OR USED ft)R .ANYPURPOSE OTHERTHAN n£ PURPOSEroR WHICHIT HAS BEEN SUBMITTEDWITHOUT OWN. DC IMTE 1"."0.92

-- NOTES: ,. TANK DEPTHIS DEFINEDAS THE DISTANCEFROM THE TANK BOnOM TO THE TOP OF THE AGITATOR SUPPORTBEAMS. 2. REQUIRED,IF THE TANK DEPTH I~i EQUAL TO OR GREATERTHAN8 FT. 3. SECUREMUD AGITATORBASE BY WELDING TO TANK. & 4. SEE P19S"1 FOR IMPELLERMOUNrrlNGLOCATIONS

REV. ECN NO. DATE OWN. CHK"D. ~I PC;IN~~ PROPRlnARVTHISINFUR~OON IS T~~_o~";;E~;-~;"oscoPE VETCOINTERNATIONAl MA-15 MUD AGITATOR1Nc. AND IS NOT ro BE COPIED. DISCLOSED OR USED FUR ANY PURPOSEOTHERTHANTHE PURPOSEFUR WHCH IT HAS BEEN SUB\4ITTEDWITHOUT I OWN. DC 04TE 1 1.10.92 DRAWINGNO.PRIORWRITTEN PER~ISSK)N BY TUBOSCOPE VLTCOINTERNATION4L INC. I CHI<"O. IAPP"o. TCA DATE DATE 11.12.92 PI 5 500 88 7 7 I ioEV. 1 -m "" t IQ l"-

, 21l 3N NOTES: 1. TANK DEPTHIS DEFINEDAS THE DISTANCEFROM C218 15H -4 3N THE TANK BOTTOMTO THE TOP OF THE AGITATOR rs I ~1Q21 930 SUPPORTBEAMS. I 1 2. REQUIRED.IF THE TANK DEPTH IS EQUALTO OR C~"57 17AX GREATERTHAN 8 FT. C~"57 17U 3. SECUREMUD AGITATORBASE BY WELDING C~"57 17V TO TANK. ~J]57 17G ~ 4. SEE PI9812 FOR IMPELLERMOUNTINGLOCATIONS

ECN NO. DATE OWN. CHK"D. TITlE GEAR REDU~:ER PROPRIETARY RIGHTS ARE INClUOCD IN THE INFOR~nON DISCLOSED H£R£IN. NEITHI:R THIS DOCUMENTNOR ~E INFORMA1M)N DISCLOSED . REpLACEMENT PARTS,OWN. HEREIN SIw.l BE REPRODUCED OR DISCLDSro TO OTH£RS FOR TRANSrERRED TO 01HER DOCUMENTSlOR ~F~RING OR rOR ANY PURPOS£ DC .l.OATE 1) =JO-9~ "DRAWINGNO. -rn:- 0~ EXCEPl AS SPEClnCAU. Y AUlHORIZED IN WRtTNG BY 1HE BRANDT COMPANY~CH~"O. IOAT[ A DIVISION OF ORt:XEl OILf1£lD S(~a:s. INC. !

T;;e...,~CE~ NOTES: 1. TANK DEPTH IS DEFINEDAS THE DISTANCEFROM THE TANK BDnOM TO THE TOP OF THE AGITATOR SUPPORTBEAMS. 2. REQUIRED.IF THE TANK DEPTH IS EQUALTO OR GREATERTHAN 8 FT. 3. SECURE MUD AGITATORBASE BY WELDING TO TANK. & 4. SEE PI9813 FOR IMPELLERMOUNTINGLOCATIONS

PROPRIETARY RK:HTS AREINCLUDED IN Tt£ INFOR~nONDISClDSED HEREIN. NEITHER THISDOCUNENT NORTHE INFORNA1KJN DISCLOSED -R E P LA C E MEN T PAR TS HEREINSHAll BE REPRODUCED OR TRANSFERRED TO 01HER DOCUNENTS ~,.~. ~~ 1 ".- --."".,"".,~ ..~ n~. DR OISCLDS[DTO OTHERS FOR MANUFACTURING ORTHE FORBRANDT ANY PURPOSE I OWN, DC IDATE 11-10-92 IDRAWING NO. Rt.y, EXCEPl AS SPEClnCALlY A OMSKJN OF DREXEL A~RIZEO IN wRlr~G BY OILf1E:LDSERVICES. INC. CO~PANYJCHK"D, !OATE - P 15 0 9 2 Ii 0 IAPP"D.

K= .1ILI"ITEM I BRANDTP.N. VENDORNO. TORQUE LB.,.-IN TORQUELB-FT 31 2517 430 36 ~J" 25171"~~"3030" 430 36 3L ;1 800 67 3M:. 3030 800 67 ", " , 3N;":~: " ", 3535 1000 83 30 3535 1000 83 3U 4545 2450 204 3V .4545 2450 204.; ,.. ".." .~--;."::30.30 6.7: : 800 ,- :i,oo"I "" ...".". " " . ":"""":" 3:Z"" : --1:;~ ,: .1615 175 -- 15, :.".~...; 3AA::"":;~":1.1";.~;:". 1615 17;5 "15" , ."..,.: t

- The Brandt Company 2800 North Frozier P.O. Box 2327 Conroe, Texas 77305

ECN NO. DATE OWN. CHK"D. TITLE FASTENER I !PROPRIETARY RIGHTSARE INCLUDED IHEREIN.NEm£R THIS DOCUWOO IN n£ INf"OR~Tk)N Olsa.OSED NOR lHE NFORMATION ~SCLOSED AG". TATOR I HEREINSH4U BE REPRODUCED OR 1RAHSF"ERREO TO OTHERDOCUWEN1SOWN DRAWINGNO. OR DI~!:.I.OSED 10 OTHERSf"OR MANUf"ACruRlI.K; OR FOR ANY PURPOSE .-" : I EXCEPT .os I"" DIVISION SPEOrlCALlY Of" OREXEL AUTHORIZED OIl11QD IN SERVCES, WRnt«: INC.. BY mE BRANDT CO~PNfY CHK"D. APP"D. -~ P I t) 5 0 7 0 I I

- ... It) ~ iI C Do ::5 to ~ N ~ to -" cn ~ S cn ~ II: .., < i <:I:: "< ~ Iv ~ ... 0 \oJ ,,""" .N" . ";3 0: toJ m ~o ...J- U) -" -" _88 ~I -" 0< . 2 m :J ~< LAJ Z ~~~~~ Z ~2 z C 8 .C C .,."., C E- X ~ ~-,., ---" ~ffi8UUZZ o: -< ~ u ~ -"\oJ $ J::I: -- Q VI -" In In ~ Z 8 \oJa.~J:::J::J CU~lnalal < ~ E-- 5- ~ ~ 0 < i il~ :I: 2 cn ~ I I I _l- 9 ~I\ .5 ill § ~V§~~~it, ~ ili!;!iil Ib;~g~h -"5:~!!:~ F~~c££~IV -1 t . M i ~ i ~~i ":--i 000 ,,".;.. , ~,. ~ t;"t;"~~ WI ~ ~ "" ~ t:.m ;;;; ~..~~, ii ~ z ~& i ~~~i I ~~ .. ~.. WI ~I D- CO""" ~ i".-" ""- .2,0 8" -qq """"" N E.~ o~ 0 ~~ OIl ~ ~OII z !!!... ~w 2 ~=:lW 8 ~~~~i ~ ffiw ...~~-i ~ o~ WI~! o~ Vim ~Ii~-INIf"lI_lon ! Brandt Worldwide Locations

Bakersfield, CA New Orleans, LA7300Downing Avenue,Bakersfield,CA, 93380 1515PoydrasSt., Ste. 1990P.O. Box 80238,Bakersfield,CA, 93380 New Orleans,LA, 70112-3723Main Telephone:805/588-8503 Main Telephone:504/636-3660EquipmentSalesTelephone:805/588-8503 Main Fax Number: 504/636-3670EquipmentLeaseTelephone:805/588-8503Partsand ScreensTelephone:8051588-8503EquipmentServiceTelephone:805/588-8503 Dickinson, NDTechnicalSupportTelephone:805/588-8503 1319Pinhook Road,Lafayette,LA, 70503Main Fax Number: 805/588-8506 P.O. Box 52252,Lafayette,LA, 70505 Main Telephone:3 I 8/235-5935 EquipmentSalesTelephone:3 I 8/235-5935Jennings,LA EquipmentLeaseTelephone:318/235..59354178 Trailer Town Road,Jennings,LA, 70546 Partsand ScreensTelephone:3 I 8/367-5025Main Telephone:3l8m4-S95l EquipmentServiceTelephone:3 I 8m4-5951EquipmentSalesTelephone:318/235-5935 TechnicalSupportTelephone:3 I 8/235-5935EquipmentLeaseTelephone:318/235-5935 Main Fax Number: 318/235-3739Partsand ScreensTelephone:318/367-5025EquipmentSemce Telephone:3 18m4-595 1TechnicalSupportTelephone:318/235-5935 Oklahoma City, OKMain Fax Number:3l8m4-2347 700 Southwest59th Street,Oklahoma City, OK, 73129 Main Telephone:405/631-5005or 1-800-725-4986 EquipmentSalesTelephone:405/631-5005or Lafayette, LA 1-800-725-4986 1319PinhookRoad,Lafayette,LA, 70503 EquipmentLeaseTelephone:405/631-5005or P.O. Box 52252,Lafayette,LA, 70505 1-800-725-4986 Main Telephone:318/235-5935 Partsand ScreensTelephone:405/631-5005or EquipmentSalesTelephone:318/235-5935 1-800-725-4986 EquipmentLeaseTelephone:318/235-5935 EquipmentServiceTelephone:405/631-5005or Partsand ScreensTelephone:318/367-5025 1-800-725-4986 EquipmentServiceTelephone:318m4-5951 TechnicalSupportTelephone:405/631-5005or TechnicalSupportTelephone:318/235-5935 1-800-725-4986 Main Fax Number: 318/235-3739 Main Fax Number:405/631-5048

Lake Arthur, LA Conroe, TX P.O. Drawer30, Lake Arthur, LA 70549 2800 North Frazier,Conroe,TX, 77303 Main Telephone:3.18m4-5951 P.o. Box 2327,Conroe,TX, 7730S-2327 EquipmentSalesTelephone:318/235-5935 Main Telephone:409nS6-4800 EquipmentLeaseTelephone:318/235-5935 Partsand ScreensTelephone:409nS6-4800 Partsand ScreensTelephone:318/367-5025 EquipmentServiceTelephone:409nS6-4800 EquipmentServiceTelephone:318m4-5951 Main Fax Number:409/S23-2793 TechnicalSupportTelephone:318/235-5935 Main Fax Number:318m4-2347 Corpus Christi, TX 426 Flato Road NewIberia, LA CorpusChristi,TX, 78405 Hwy. 90 West,New Iberia, LA, 70560 Main Telephone:512/289-7794or 1-800-725-4974 Main Telephone:318/367-5025 Main Fax Number:512/289-9058 EquipmentSalesTelephone:318/235-5935 EquipmentLeaseTelephone:318/235-5935 Partsand ScreensTelephone:318/367-5025 EquipmentServiceTelephone:318m4-5951 TechnicalSupportTelephone:318/235-5935 Main Fax Number:318/364-6606 Brandt Worldwide Locations

Houston, TX Comodoro,Argentina397N. Sam HoustonParkway,Ste. 475 Hipolito Yrigoyen 41 65B IndustrialHouston,Texas 77060 9000ComodoroRivadaviaMain Telephone:281/272-2440 Chubut,ArgentinaPartsand ScreensTelephone:409/756-4800 Main Telephone:54-97-480-491or 54-97-480-406 Main Fax Number:54-97-480-491or 54-97-480-406

Livingston, TXHwy. 59 South, Livingston,TX, BuenosAires, ArgentinaP.O. Box 1622,Livingston,TX, 77351 SanMartin 345 4to. PisoMain Telephone:409/327-6206or 1-800-725-4965 BuenosAires, 1004,ArgentinaEquipmentSalesTelephone:409/327-6206or Main Telephone:54-1-394-3939or 54-1-394-45991-800-725-4965 or 54-1-394-6213EquipmentLeaseTelephone:409/327-6206or Main Fax Number:54-1-394-44991-800-725-4965Partsand ScreensTelephone:409/327-6206or1-800-725-4965 Ciudad del Carmen, MexicoEquipmentServiceTelephone:409/327-6206or Ave. 4 OrienteManzanaD Lote 8 J~ltos1-800-725-4965 PuertoIndustrialLagunaAzulTechnicalSupportTelephone:409/327-6206or Ciudad del Cannen,C.P.24121,Campeche,Mexico1-800-725-4965 Main Telephone:52-938-28979Main Fax Number: 409/327-6229 EquipmentSales:9151550-6802or 1-800-725-4983 EquipmentLease: 9151550-6802 011"1-800-725-4983 Partsand Screens:9151550-6802or 1-800-725A983Odessa,TX EquipmentService:9151550-6802or 1-800-725-498311818Interstate20 East TechnicalSupport:9151550-6802 o,r 1-800-725-4983Odessa.TX 79765 Main Fax Number:52-938-28978P.O. Box 12887Odessa,TX 79768-2887Main Telephone:915/550-6802or Santafe de Bogota, Colombia1-800-725-4983 Carrera9A. No. 97A-53 Piso4to.EquipmentSalesTelephone:915/550-6802or Edificio SiracusaOFNA # 4014 1-800-725-4983 Santafede Bogota,D.C. Columbia EquipmentLeaseTelephone:915/550-6802or Main Telephone:57-1-635-7915Ol~57-1-635-5859 1-800-725-4983 Main Fax Number:57-1-635-5758Partsand ScreensTelephone:915/550-6802or 1-800-725-4983 EquipmentServiceTelephone:915/550-6802or Tartagalt Argentina 1-800-725-4983 Espana364,4560 Tartagal-Salta,Jlrgentina TechnicalSupportTelephone:915/550-6802or Main Telephone:54-875-21649or 54-875-22053 1-800-725-4983 Main Fax Number: N/A Main Fax Number: 915/363-9100

Mendoza, Argentina RutaNacioanalNo.40 Sur-KM. lC).22, 5507Lujan de Cuyo Mendoza,Argentina Main Telephone:54-61-985-126 Main Fax Number: N/A Brandt Worldwide Locations

Yopal, Columbia Bonnyville, Alberta Barrio 20 de Julio CarTera15 Calle 32 6616-45 Street,Leduc,Alberta, T9E 7C9 Canada Yopal, Columbia Main Telephone:403/826-2263 Main Telephone:57-875-54865/864/863 Main Fax Number:403/826-2296 Main Fax Number: 57-875-54866 Calgary, Alberta 1400-5405th. Avenue,Calgary,Alberta, 12P 0M2 Canada La Romain, Trinidad Bldg. 8A, Edoo"s Dr. Edoo"s Industrial Complex Main Telephone:403/538-1615 La Romain, Trinidad, W.l. Main Fax Number:403/538-1896 Main Telephone: 868-652-3707 or 868-652-4346 or 868-652-0806 or 868-652-0816 Grand Prairie, Alberta Main Fax Number: 868-657-9771 6616-45 Street,Leduc,Alberta, T9E 7C9 Canada Main Telephone:403/538-1615 Main Fax Number:403/538-1896 Anaco, Venezuela Via Los Pilones, KM 1 Carretera Anaco Anaco, Anzoategui, Venezuela Leduc, Alberta 6616-45 Street,Leduc, Alberta, T9E 7C9 Canada Main Telephone: 58-82-40693 Main Fax Number: 58-82-46382 Main Telephone;403/986-6063 EquipmentSalesTelephone:403/264-9646 EquipmentLeaseTelephone:403/264-9646 Partsand ScreensTelephone:403/5186-6063 Barinas, Venezuela Av. Industrial, Edificio La Cascada leT. Piso EquipmentServiceTelephone:403/986-6063 Barinas, Edo. Barinas, Venezuela TechnicalSupportTelephone:403/986-6063 Main Telephone: 58-73-465381 Main Fax Number:403/986-6362 Main Fax Number: 58-73465091

Estevao, Saskatchewan 6616-45 Sn-eet,Leduc, Alberta, 1"9E 7C9 Canada Main Telephone: 306/634-3351 Main Fax Number: 306/634-1299 Brandt Worldwide LocationsBalikpapan, Indonesian PupukRayaNo.30, 76114Balikpapan,EastKaIirnantan,1nd onesiaMain Telephone:62-2117827383or 62-542/61120EquipmentSalesTelephone:62-21/7827383or62-542/61120EquipmentLeaseTelephone:62-21/7827383or62-542/61120Parts and Screens Telephone: 62-21n827383 or 62-542/61120 .

Aberdeen,Scotland BadentoyAvenue,BadentoyPark, Aberdeen Portlethen,AberdenAB124YB Scotland Main Telephone:44-1224-787700 Main Fax Number:44-1224-784455 E-Mail: Equip. Sales/Lease:sales@brandt-ok.com Equip.Service:service@brandt-uk.com Parts& ScreenSales:ops.support@brandt-uk.com Technical Support:engineering-brandt