mcm mud agitator supplier

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

KOSUN MA series mud agitator is part of the drilling fluids solids control equipment, which is mainly used to agitate and mix the drilling mud to prevent solids particles from depositing in the circulating tank and to stabilize the performance of drilling fluids.

Tags:mud agitator,agitator,hydraulic mud agitator,oilfield mud agitator,drilling mud agitator,oilfield drilling mud agitator,mud agitator for mud tank,Tank Mixers Agitators,mud pit agitator, api mud agitator, horizontal mud agitator, agitator mud system.

5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators 5W 7.5W 15W motor / gear-box Drilling Mud Mixing Industrial mud tank mud Agitators

Mfr"s rep. of custom designed agitators. Agitator motors are standard NEMA or IEC frames & are available in explosion proof, variable speed, with special windings or other specified features. Agitator drives are available in top, side or bottom entry configurations with a full line of gearboxes from fractional to over 1,000 hp & torques to over 1,000,000 in. lbs. Agitator shaft designs include from 1-1/2 in. solid to over 12 in. solid in carbon steel, stainless steel & high corrosion resistant alloys per specified requirement coated with plastisol, PVDF, FTFE or PFA & lined with rubber or FRP. Agitator impellors are available in a complete range of process specific designs. Agitators are suitable for liquid blending, solid suspension, dispersion, dissolution, emulsification, washing or leaching, gas dispersion & absorption, crystallization & heat transfer applications.

Savona Equipment is your source for New, Used, and Reconditioned Industrial Agitators and Mixers for processing products in the mining, chemical, food, pharmaceutical and cosmetic industries by mixing liquids together, promoting the reactions of chemical substances, keeping homogeneous liquid bulk during storage and increase heat transfer (heating or cooling). RefurbishedIndustrial Agitators and Mixers parts will be fully repaired or replaced.

MCM has been manufacturing Centrifugal Pumps since 1943 and originally supplied pumps to The Harrisburg Company for the oilfield industry. Since that time many pump companies have entered the marketplace that are interchangeable with MCM pumps such as Mission®, Halco®, Harrisburg®, Mattco®, Demco®, NOV® & Forum® to name a few.

Lightweight, but sturdy construction with the highest torque rating in the industry. Example: 15 hp KOE Agitator weighs 246.4 kg compared to industry average of 831.8 kg)