mud agitator brandt brands

The skid mounted MA-RG agitator is compact, and its low profile reduces headroom requirements and provides more layout space on top of the tanks. The gearbox is a triple-reduction helical-bevel gear drive system that reduces the rotational speed of the motor to drive the impeller(s). Up to 95% mechanical efficiency helps reduce horsepower requirements.

Impellers are available with flat blades (radial flow), contour blades (axial flow), and canted blades (radial/axial flow). The impellers are sized according to tank volume and expected duty. Active mud system compartments—such as solids removal sections, mud mixing sections, and slug pits, which need a higher shear force to produce immediate mixing—are another consideration in impeller sizing.

requirements and provides more layout space on top of mud tanks. The triple reduction helicalbevel gear drive system reduces the rotational speed of the motor to drive the impeller(s). Up to

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for GN Solids Control drilling fluids processing system.

GN Solids Control as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

China manufacturer GN Solids Control offer the world with drilling mud agitator equipments.We are an exporter of drilling fluid mud agitator for Indian, Russian,middle east.etc..Our factory and company are Quality Management System ISO 9001-2000 certified.GN Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.

Brandt agitators serve the drilling industry with quality, time- Vertically mounted agitators mount the motor in line with the proven mechanical agitation. The Brandt horizontally mounted gear reducer and output shaft. The explosion-proof, C-face MA™-series agitator has been the industry standard for many motor bolts on and couples to the double reduction helical years. Its rugged design, simplicity and dependability have gearbox. The entire assembly bolts to a fabricated steel base made it the preferred choice of a majority of operators and plate, which is mounted on the mud pit. contractors. The low profile of Brandt horizontal agitators reduce Vertically mounted agitators are lighter than right- headroom requirements. They come in two styles. angle-drive horizontal units, but produce the same mixing Brandt’s original MA™ series with 30:1 single results. In some instances horsepower requirements are reduction worm-gear drive that uses a sliding action worm and reduced due to the 95% efficiency of the helical gearing. gear. Available in 3, 5, 7.5, 10,15, 20, 25, and 30 HP. Impellers Brandt’s new MA-RG (Right Angle Gear) double Brandt agitators are available with three types of reduction,helical gear designed primarily for applications impellers and are sized according to tank volume and expected requiring more than 15 horsepower can be used for large duty. Active mud system compartments (such as solids displacement applications. Up to 95% mechanical efficiency removal sections, mud mixing sections and slug pits) need a helps reduce horsepower requirements compared to conven- higher shear blade to produce more immediate mixing. tional designs. Therefore Brandt recommends either a flat blade or canted The 1:1 ratio of height-to-width of both designs blade, depending on tank depth. Bulk storage compartments results in a low center of gravity, providing stability and safety. need a low-shear blade that maintains suspension in a gentler Brandt VMA™series (Vertical Mechanical Agitator) is manner. ideal for installations with limited footprint availability. These For active mud system compartments less than 5 feet double-reduction, inline, helical gear agitators provide smooth, in height, a flat blade impeller can be used to induce radial flow vibration-free operation and efficient mixing, just like right-angle patterns in the mud. Flat bladed impellers should be placed Brandt agitators. approximately six inches above the tank or two inches above the bottom shaft stabilizer, if one is used. Brandt Agitators™

When compartment height is greater than 5 feet, either a 60- Regardless of what style agitator or impeller is used, properdegree canted impeller, or a high volume contour blade is used sizing is critical. Impeller sizes are determined by calculatingto promote axial as well as radial flow. Canted impellers should the TOR (Turn Over Rate) for each agitated compartment. TOR isbe placed on the shaft so that the distance between the bottom of the time required, in seconds, to completely move the fluid in athe tank and the lower edge of the impeller blades is equal to ¾ mud tank and can be calculated by knowing the tank volume andthe diameter of the impeller. For tanks deeper than 12 feet, two impeller displacement.or more impeller blades may be used in combination. Vt TOR = × 60 For bulk storage tanks, high-efficiency, contour Dimpellers are best. This variable pitch impeller reduces Vt = Tank volume gallonshorsepower requirements and induces less shear to the mud. D = Impeller displacement in gpm (as calculated Shafts by Brandt engineering staff and displayed in chart above) Manufactured of solid mild steel, the agitator shaft is For tanks sized to metric specificationscoupled to the gear reduction assembly with a rigid coupling. All Vt = Tank volume litersshafts are keyed at the bottom for adjustment of impeller height. D = Impeller displacement in lpm (as calculatedA bottom end stabilizer is supplied when tank depths exceed 6 by Brandt engineering staff and displayed in chart above)feet. The stabilizer reduces side loading and protects the agitator For 60-degree canted blade applications TOR shouldwhen auxiliary equipment is carried inside the mud tanks during be between 40 and 90 seconds. As the TOR approaches 40rig moves. seconds, the chance for air entrainment increases. At TOR greater than 90 seconds, proper suspension may be jeopar- T Y P I C A L T U R N O V E R R A T E P E R C O M P A RT M E N T dized and solids will begin to settle. SHAKER INTERMEDIATE SUCTION RESERVE PILL For contour blade applications, TOR must be signifi- Canted 50- 75 50- 75 65- 85 50- 80 40- 65 Impeller cantly faster to achieve the same results, but because of the Contour 25- 38 25- 38 32- 42 25- 40 20- 32 100% axial flow, air entrainment is not a problem. Blade Brandt Agitators™

Model HP Length Height Width Min. Impeller Shaft Shaft Agitator Length Height Width Min. Shaft Shaft Agitator (in) (in) (in) Dia. (in) Diameter Wt. Less Shaft (mm) (mm) (mm) Impeller Diameter Wt. Less Shaft Canted - Contour (in) (lbs/ft) & Impeller Dia. (mm) (kg/m) & Impeller Wt. (lbs) (mm) Wt. (kg)MA3 3 35 1/4 15 11/16 19 9/16 24 28 1 3/4 8 1/4 406 895 398 497 610 44 12 184MA5 5 40 1/4 16 3/4 21 9/16 28 34 2 3/8 15 580 1022 425 548 711 60 22 263MA7.5 7.5 52 1/8 24 1/4 27 5/8 32 38 2 3/8 15 1200 1324 616 702 813 60 22 544MA10 10 52 1/8 24 1/4 27 5/8 32 42 3 24 1224 1324 616 702 813 76 36 555MA15 15 52 1/8 24 1/4 27 5/8 36 48 3 24 1320 1324 616 702 914 76 36 599MA20 20 61 1/4 27 1/8 34 1/4 40 52 3 1/4 28 1898 1556 689 870 1016 83 42 861MA25 25 68 5/8 30 7/8 39 1/2 40 60 3 1/2 32 3/4 3130 1743 784 1003 1016 89 49 1420MA30 30 68 5/8 30 7/8 39 1/2 40 64 3 1/2 32 3/4 3180 1743 784 1003 1016 89 49 1442

Brandt agitators provide more thorough mixing of pits and Contact Brandt for proper agitator sizing. eliminate the problems associated with mud guns, such as Specifications are subject to change without prior notice particle degradation and gun nozzle washout. Brandt agitators can be sized to fit any mud system or type of duty. From Flowline To Disposal, Brandt has the solution to your separation and waste management Western Hemisphere Eastern Hemisphere Phone: (713) 856-4100 Phone: 44-1224-343600 problems. We are one of the Varco Companies; technology Fax: (713) 856-4133 Fax: 44-1224-343700 leaders to the drilling industry. www.varco.com brandt-rigtech-uk@varco.com This is not a complete list of all locations. Call for the location nearest you.

BETTER produce high-efficiency mud agitator, equivalent to BRANDT™ Agitators MA series, its rugged design, simplicity and dependability have made it the preferred choice of a majority of operators and contractors.

Mud agitator is an important part of the drilling-fluid solids controling system. Drilling fluids agitatorcan be installed on drilling fluid tank, with the impeller submerged into certain depth under fluid surface to stir the fluid directly.During this process, the drilling fluid can be mixed even, and the solid particles are eliminated.In this way, it can improve solid phase dispersion, and increase the viscosity and gel strength, thus to make drilling fluid keep accordant with the requirement, provide needful fluid for drilling process, and ensure the smooth going of drilling work.Drilling mud agitator is the same as mud agitator.

TR solid control provide vertical and horizontal agitator. Horizontal mud agitator is divided into coupling type and direct type agitator. If you need a horizontal mud agitator, we recommend you use a direct type agitator. drilling mud Agitator is an ideal device for stirring, mixing liquid and preventing the solid-phase precipitation in the mixture.

Drilling Fluids Agitator in the mud system used to,mixing ratio and prevent to the mud tanked.TR solid control is an exporter of centrifugal pump . We are an exporter of drilling fluids mud agitator.Our factory approval the ISO9001,drilling agitator have the API certification.TR solids control is the designed,selling,production,service and delivery of Chinese mud agitator manufacturer. We will provide the high quality drilling fluids agitator and best service.Your best drilling mud tank agitators start from TR solids control.

© Copyright 2003 Varco International, Inc. Publication date: August 21, 2003 Brandt is a registered trademark of Varco International, Inc. All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective owners. All rights reserved. This publication is the property of, and contains information proprietary to Varco International, nc. No part of this publication may be reproduced or copied in any form, or by any means, including electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Varco International, Inc. Information in this manual is subject to change without notice.

Warranty Brandt warrants that, for a period of one year from the date of delivery equipment of Brandt manufacture, the Equipment shall be free of defects in materials and workmanship under normal use and service, and provided the Equipment is used and maintained in accordance with instructions supplied by Brandt. This is Brandt"s sole and exclusive warranty. If a defect in the Equipment appears within one year from the date of shipment, and Purchaser has given written notice of such defect within thirty days from the discovery thereof, Brandt will repair or replace the part, at its option, by shipping a similar part FOB shipping point or, at its option, refund an equitable portion of the purchase price. Brandt may require the return, to a designated Brandt location, of the defective part, transportation prepaid to establish Purchaser"s claim. No allowance will be made for repairs undertaken without Brandt"s written consent or approval. This warranty applies only to equipment manufactured by Brandt. Warranties on equipment manufactured by others, if any, are assigned to Purchaser by Brandt (without recourse) at time of delivery. Any description of Equipment, drawings, specifications, and any samples, models, bulletins, or similar material, used in connection with this sale are for the sole purpose of identifying the Equipment and are not to be construed as an express warranty that the Equipment will conform to such description. Any field advisory or installation support is advisory only. The foregoing warranties are in lieu of all other warranties, whether oral, written, express, implied or statutory. Implied warranties or merchantability and fitness for a particular purpose will not apply. Brandt"s warranty obligations and purchaser"s remedies thereunder are solely and exclusively as stated herein. Purchaser"s sole and exclusive remedy, whether based upon warranty, contract or tort, including negligence, will be to proceed under this warranty. All liability of Brandt shall terminate one year from the date of delivery of the Equipment.

Intended audience This manual is intended for use by field engineering, installation, operation, and repair personnel. Every effort has been made to ensure the accuracy of the information contained herein. Brandt®, a Varco company, will not be held liable for errors in this material, or for consequences arising from misuse of this material.

Safety requirements Brandt equipment is installed and operated in a controlled drilling rig environment involving hazardous operations and situations. Proper service and repair is important for safe and reliable operation. Operation and service procedures provided by Brandt manuals are the recommended methods of performing those operations. To avoid injury to personnel or equipment damage, carefully observe the following safety requirements.

Local codes may apply. Please consult them prior to performing any operation. The presence of a Brandt representative at the site does not relieve the owner/ operator of responsibility to follow published installation, operation, and maintenance instructions. The equipment discussed in this manual may require or contain one or more utilities, such as electrical, hydraulic, pneumatic, or cooling water. Before installing or performing maintenance or repairs on equipment, read the following instructions to avoid endangering exposed persons or damaging equipment.

Introduction HMA series agitators are heavy-duty mechanical mixers for viscous fluids specially designed for seal type tanks. Several models are available to meet a variety of mixing needs. The naming convention for these models is: HMA-X where X = the horsepower of the unit. For example, HMA-20 is the 20 hp mud agitator for seal type tanks. Each HMA series agitator uses a pipe-spool shaft and impeller(s) to maintain a homogeneous mixture of liquids and solids within a tank. Impellers have contour blades (axial flow), and may be installed in multiple configurations to provide the desired results. The impeller shaft is suspended from and attached to the output shaft of the low-profile, skid-mounted gearbox. The gearbox uses a worm-worm gear drive system to reduce the rotational speed of the explosion-proof motor to drive the impeller(s). HMA series agitators are available in models ranging from 25 to 40 horsepower, and can be seal base unit or shaft seal units. Impellers range from 54 inches (1372 mm) diameter to 84 inches (2134 mm) diameter.

Motor The motors used on Brandt mud agitators are explosion proof, T-frame, three-phase electric motors directly coupled to the gearbox using a flexible coupling with a solid steel guard. Motors are available for most voltage/frequency requirements. Other electrical code styles and temperature ratings are also available.

Gearbox The gearbox is a triple reduction worm-worm gear drive, reducing the motor speed (900 rpm @ 60 Hz) to the agitator speed (30 rpm) in a single 30:1 reduction. The gearbox contains an output shaft, two seals, and four to six bearings in addition to the worm-worm gear. The bearings are spaced to minimize shaft vibration and deflection, and seals are readily obtainable standard sizes. Unlike many competing agitators, Brandt’s gearbox requires no manual lubrication of the bottom output bearing.

Impeller Impellers are contour blade style, and may be installed in multiple configurations to provide the desired results. Impellers range from 54 inches (1372 mm) to 84 inches (2134 mm) in diameter. Larger custom-designed blades and mixing systems are also available. See Chapter 8 to find the Brandt office nearest you. Impeller speed is 30 rpm for 60 Hz applications.

Contour-blade impellers On contour blade impellers (Figure 2-1), the blades are designed with a variable pitch reducing the horsepower requirements and inducing less shear to the mud. Contour blades move liquid downward to the bottom of the tank, along the tank bottom toward the tank walls, and then up the tank wall. All fluid in the tank is mixed continuously, and the same consistency is maintained in all parts of the tank. Field experience has confirmed that this design provides the most homogeneous mixture in the widest range of installations. Fluid agitation minimizes fluid control problems caused by inconsistent mixtures.

Impeller shaft HMA standard impeller shafts are manufactured of eight-inch pipe spools. The impeller shaft is coupled to the gearbox with a rigid coupling. Shaft length is determined by tank depth. When ordering impeller shafts, always specify the actual tank depth. Tank depth is defined as the distance from the bottom of the tank to where the agitator is mounted.

Bottom shaft stabilizer A bottom shaft stabilizer is required to reduce side loading on the gearbox bearings. The stabilizer also protects the agitator shaft and impeller when auxiliary equipment is carried inside the mud tank during rig moves.

There are several options available for HMA-series units. Popular options include special paint finishes, remote starters, other electrical controls, and special duty motors. Contact your Brandt sales representative to discuss which options may be right for your application. See Chapter 8 to find the Brandt office nearest you.

2. Impeller rotation: The impeller should rotate clockwise when viewed from top. 3. Oil fill/breather plug: plug must be clear of any obstruction to prevent pressure build-up and possible seal damage. 4. Agitator should operate with no vibration. 5. Check rubber insert on input shaft coupling for wear and cracks. 6. For optimal performance, change the oil after the first five days of operation.

1. Inspect for oil leaks. 2. Keep motors clean and ventilation opening clear of mud build-up or other debris. 3. Check impeller shaft coupling for proper make-up.

Our agitators feature the new dracomet coated corrosion resistant keyless coupling for easy installation and impeller adjustment. The units come complete with base plate, motor, gearbox, impeller, shaft & couplings.

BRANDT™ Agitators serve the drilling industry with quality, time-proven mechanical agitation. The horizontally mounted MA series agitator has been the industry standard for many years. Its rugged design, simplicity and dependability have made it the preferred choice of a majority of operators and contractors. The low profile of horizontal agitators reduces headroom requirements.

The Vertical Mechanical Agitator (VMA) series is ideal for installations with limited footprint availability. These double-reduction, in-line, helical gear agitators provide smooth, vibration-free operation and efficient mixing, just like the right-angle drive agitators.

VMA series agitators align the motor shaft with the gear reducer output shaft. The explosion-proof, C-face motor bolts on and couples to the double reduction helical gearbox. The entire assembly bolts to a fabricated steel base plate, which is then mounted on the tank.

Vertically mounted agitators are lighter than right-angle-drive horizontal units, but produce the same mixing results. In some instances, horsepower requirements are reduced due to the 95% efficiency of the helical gearing.

Solids Control equipment: shale shaker, desander, desilter, mud cleaner, decanter centrifuge, mud agitator, mud gun, centrifugal pump, shear pump, mud tank etc.

Shaker screens: replacement shaker screen for Derrick FLC shale shaker, replacement screen for NOV Brandt king cobra shakers, replacement screen for Swaco shakers.

In 2014, China oilfield services limited bought one sets liquid mud plant from GN via local rig service company. The liquid mud plant including 17 set mud tanks, chemical mixing tank system, and mud treatment tank system with decanter centrifuge. And until now, the performance is also very good.