mud agitator brandt quotation

BRANDT D-SANDER  TYPE SR-2, SR-3BRANDTEA1282.203.BRANDT.0016GASKET,6″,VICTAULIC P584-10AG FOR STYLE 75,77,78(BRANDT PN 10AG) (CROSS REF 1282.203.0220)10

Fluid Systems mud agitators are designed to mix and suspend the solids using axial flow, promoting low particle size degradation and effective polymer shear. Unlike mud guns, the FSI mud agitator is relatively a low energy device, easy to operate and inexpensive to maintain. Our standard horizontal and vertical mud agitators range in 5 to 30 horsepower with an explosion proof motor and gear reducer. We size mud agitators according to the configuration and maximum mud weight.

The skid mounted MA-RG agitator is compact, and its low profile reduces headroom requirements and provides more layout space on top of the tanks. The gearbox is a triple-reduction helical-bevel gear drive system that reduces the rotational speed of the motor to drive the impeller(s). Up to 95% mechanical efficiency helps reduce horsepower requirements.

Impellers are available with flat blades (radial flow), contour blades (axial flow), and canted blades (radial/axial flow). The impellers are sized according to tank volume and expected duty. Active mud system compartments—such as solids removal sections, mud mixing sections, and slug pits, which need a higher shear force to produce immediate mixing—are another consideration in impeller sizing.

Shortly before, an purchase order of 14 sets mud agitator was placed to GN Solids Control from Halliburton Algeria Corporation. Now all the 14 agitators have been on the way to the destination port. As we known, Halliburton is one of the largest suppliers to provide products and service to energy industrial. The cooperation with Halliburton proves the high quality of our products and service.

Worthy mentioning is that the material of the agitator shaft and impeller is stainless steel. That is designed according to the requirement and considering the work condition of both these parts. For the shaft and impeller is working under the surface of the mud and there are solid particles and chemicals in the mud. In order to prevent the submersible parts from being corroding during the working processing, we apply stainless stell as the material of the shaft and impeller. This could significantly extend the life time of the agitator, reduce the the replacement frequency and save the maintanence cost for users.

Introducing a new range of Liquid Agitators Mixers. Australian made and fabricated from the highest quality of materials. Agitators are reliable and durable in service. Features Motors Gears Are of the highest standards and meet energy efficient standards. Available in 3 phase or single phase in all models. Nose Cone Integrated shaft support bearing lip seal. Supports the shaft loads and provides excellent sealing against oil contamination. Shaft connection is quick and reliable. Clamp Mountings Heat treated Aluminium construction for light weight, high strength and corrosion resista....

The direct-drive shaft assembly featured on our agitators maximizes motor efficiency which results in reduced energy consumption and greater performance. Available in vertical or horizontal configurations, all of our agitators are completely customizable and or to meet your specific tank dimensions and mud weight range.

BRANDT™ Agitators serve the drilling industry with quality, time-proven mechanical agitation. The horizontally mounted MA series agitator has been the industry standard for many years. Its rugged design, simplicity and dependability have made it the preferred choice of a majority of operators and contractors. The low profile of horizontal agitators reduces headroom requirements.

The Vertical Mechanical Agitator (VMA) series is ideal for installations with limited footprint availability. These double-reduction, in-line, helical gear agitators provide smooth, vibration-free operation and efficient mixing, just like the right-angle drive agitators.

VMA series agitators align the motor shaft with the gear reducer output shaft. The explosion-proof, C-face motor bolts on and couples to the double reduction helical gearbox. The entire assembly bolts to a fabricated steel base plate, which is then mounted on the tank.

Vertically mounted agitators are lighter than right-angle-drive horizontal units, but produce the same mixing results. In some instances, horsepower requirements are reduced due to the 95% efficiency of the helical gearing.

• The Agitator features a rugged cast iron gearbox that houses helical bevel gearing. The gear sets are precisely ground to prevent all but the slightest amount of backlash in the gear sets. This feature promotes longer life by eliminating the high

• Internal gears and bearings are lubricated with mineral oil. When the ambient temperature drops below 23ºF or rises above 140ºF, a synthetic lubricant should be substituted. A unique feature of the Agitator is the lower bearing, which can

When it comes to a solid control system on any type of drilling equipment, the shale shaker is arguably the most important piece of equipment. With drilling fluid being so important to maintaining drill performance, being able to utilize fluid efficiently is crucial. A shale shaker is what separates any drilling liquid, commonly referred to as mud, from solids, also known as cuttings. On a shale shaker, one of the most important components is the shale shaker screen. The shale shaker screen is actually what separates liquids from solids so having the correct screen can determine how effectively drilling equipment operates.

The shale shaker screen is a mesh screen that is created out of woven metal that goes inside the shale shaker. Whenever solids or cuttings are produced from drilling equipment, they are coated in drilling liquid. When those cuttings are shaken over shale shaker screens, the screen is able to capture all of the solid particles and allow any excess mud to drip through the screen where it can then be deposited back into the tank.

Solids control world is a leading supplier of drilling mud solids control equipment from China. We are experienced in the drilling mud and fluids solids control field since 2008.