mud agitator manufacturer in india brands

Raval Pada, Dahisar (E), Mumbai Gala No A-13 Chintypada, Bidco Road Oswal Industrial Estate Palghar Palghar Maharashtra, Raval Pada, Dahisar (E), Mumbai - 401404, Dist. Mumbai, Maharashtra

- Lightweight, but sturdy construction with the highest torque rating in the industry. Example: 15 hp KOE Agitator weighs 246.4 kg compared to industry averageread more...

We are providing to our clients superior quality Mud Agitators. Our offered Mud Agitators are widely appreciated by our clients which are situated all round the nation. These Mud Agitators are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications.

The Technostrength Mud Agitator combines compact design with high torque performance levels necessary for a uniformly suspended flow of drilled solids throughout the mud systems.

Powered by 1500RPM (4 pole) explosion proof motor and connected through heavy duty gear reducer, this agitator transfers high torque at RPM toread more...

Used for rapid and uniform incorporation of dry and liquid ingredients.Creates a deep vortex, exposing dry ingredients directly into the agitator blades. This is a standard agitator for bakery applications.Ideal for soluble, dry ingredients that want to float on the surface.

GAURAV ASSOCIATES manufacture the GAMA range of Mud Agitators. These Mud Agitators are used for agitating mud slurry for obtaining consistency through proper blending in flow controlled applications.

Mud agitator, also called drilling mud agitator, used for drilling fluid agitation mix, prevent drilling fluid solid particles in the tank circulation system deposit, cycle drilling fluid performance stability, mixed evenly. Mud agitator composed by explosion-proof motor, reducer, engine base and impeller components four parts.read more...

We offer best range of Mud Agitator which works continuously at the drilling site by delivering optimum results. Our Principles has made us to supply our highly technological equipment to the power plants which are present in abroad.

Technostrength FLP Motors range from 5HP to 30HP and can be used with various power configurations. Gear reducers are worm type or helical bevel type depending on the choice of the user. For Achieving Highest Performance in various mud conditions we offer 3 to 6 blade designs, mixed and axial flow turbine types, canted, bolted and twisted profile types also. For all these equipment Mud Agitator Manufacturer in India like Technostrength is occupying the best place in the industry.

Solid Control Mud Agitators act as mud mixers on mud tank. On a usual process these agitators should rotate at 60-70 rpm. Our high performance equipment is appreciated among clients all over India. If there is a large quantity of mud present in the site then large torque mud agitator will be required.

We suggest the customers to choose the mud agitator according to the size of tank along with torque level. Mud Agitator Manufacturer in Hyderabad is the name suggested to our services by all our previous customers.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

A Mud Agitator is used in surface mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor, coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation of drilling fluid mud agitator. The objective is to obtain a uniform suspension of all solids.

Descriptions of Mud Agitator1. Mud agitator is an equipment to mix solid and fluid, mainly used in oil and gas drilling mud process, mineral working site, etc. mud system.

2. This type agitator holding simple structure, large bearing strength, low noise, more durable. It prevent solid sediment and maintain drilling fluid property. Features 1.Typical C face motor installation 2.Small footprint without skid

3.Helical-Bevel gearbox 4.Motor can be horizontal or vertical Benefits 1.Longer usable life on motor and gear box 2.Require less space also easy to handle 3.High efficiency, low noise, low operating temperature

Mud Agitator, Drilling Solids Control,Mud Cleaning Agitator, mud agitator manufacturer Exporters, mud agitator manufacturer Suppliers, mud agitator manufacturer wholesalers, mud agitator manufacturer distributors, mud agitator manufacturer Manufacturers, mud agitator manufacturer sellers, mud agitator manufacturer

We present to you a line of very efficient and highly productive Agitators that are used in various industries. We make use of a variety of the choicest materials like steel, stainless steel, hastelloy and titanium in the manufacture of these agitators. We offer this type in technical specifications as per your requirements.

Adinath designs and manufactures assorted types of Anchor Type Agitators and also customized turbines in accordance with the requirements of the process. The height and the sweep diameter of the turbine are carefully ascertained for competent dispersion of the reactants and homogenous mass. The Agitators are dynamically balanced to guarantee weight balance at high rpm, thereby increasing the agitator and motor life. These types of Agitators are used if dispersion is required at high rpm.

Along with the ability for Design and Fabrication of Agitator For Process Vessels, we offer complete mixing agitators, chemical agitators, mixers, blenders, reactors with shortest deliveries for trouble free lifelong operations

Mud Agitator is used for maintaining a drilling / work over fluid of uniform consistency throughout the surface mud system. Featuring a "C" face, Sparklet Agitators are coupled to a rugged oilfield gearbox, which eliminates misalignment and troublesome couplings Models: Available more...

JBQ series mud Agitator, Less than 5.5 kW drilling mud Agitator adopts the blender cycloid speed reducer, and it is applied to the drug liquids mixing tank. This mud agitator has the advantage of compact structure so it occupies small area. More than 7.5 kW Mud Agitator uses the turbo and worm gear speed reducer, with the large torque transmission、 the revolution is steady、it works reliablely and has great merit. Common model of mud agitator is JBQ5.5kW 、JBQ7.5kW 、JBQ11kW and JBQ15kW.The drilling mud agitator is an important components for GN Solids Control drilling fluids processing system.

GN Solids Control as a professional manufacturer for soilds control equipments, we have designed lots of high-quality products, and JBQ series Agitator is one of them. To keep both the mud uniformity and the suspension of solids, the mud agitator is used to agitate the mud consecutively and reliably.This agitator agitates the mud to make cuttings, silt and sand pass the solids control system without being precipitated onto the tank bottom. Due to the simplex turbine decelerator, this product is featured by compact construction, light weight, balanced transmission, low noise, high efficiency of transmission and strong agitating power. Therefore, it is a reliable product in the solids control system.

China manufacturer GN Solids Control offer the world with drilling mud agitator equipments.We are an exporter of drilling fluid mud agitator for Indian, Russian,middle east.etc..Our factory and company are Quality Management System ISO 9001-2000 certified.GN Solids Control operate international oil gas drilling mud separation system sales,service,manufacturing,distribution serivce.Buy drilling fluid mud agitatorfrom China manufacturer.Your best mud agitator for drilling mud circulation system.

Mud Agitator is usually used n mud mixing tank to keep mud uniformity. The Mud Agitator is featured by compact construction, light weight, low noise and strong agitating power. We provide mud agitators in different motor power from 5 HP to 30 HP or as per customers requirements.

Mud Agitator is used in mud systems to suspend solids and maintain homogeneous mixture throughout the system. A mechanical agitator is driven by an explosion-proof motor,coupled to a gear box that drives the impeller shaft. The impellers (turbines) transform mechanical power into fluid circulation or agitation. The objective is to obtain a uniform suspension of all solids.

Mud Agitator features a “C” face motor couple to a rugged oil field gearbox, which eliminates misalignment and troublesome couplings. This configuration promotes long motor and gear box bearing life.

Agitator finds its applications at places where different temperatures/densities of liquid exist in the same system e.g. Hot and cold liquid, Agitators can be used at places where the above mentioned conditions exist in a system to make these variables uniform in the entire system, like in ice banks where ice is produced on evaporating coils.

Without agitators, there would be no circulation of water in the tanks, it would have different densities and temperatures at different locations in the tank.

An Agitator, if installed in the system circulates the liquid in such a manner that temperature/density of water (also brine, glycerine as per different applications) remains uniform at all points of the system giving proper heat exchange and more efficient cooling for any application.

Another place where Agitators finds its application is mixing of powder with liquids. eg. Milk powder with water, paint powder with turpentine and many other chemicals where reaction takes place only after proper mixing of its elements.

Agitators also work well where mixing of small quantities of some elements (solid or liquids) with a large quantity of fluid like vegetable oil and vitamin A or vitamin D.

Hubei Craun Technology Equipment Co., Ltd (abbreviated as Craun Tec.), with the registered capital of 10 million RMB and 25000㎡ factory ground, is located in High Tech. industrial park of Xian Ning, Hubei province, which is 100 Kilometers away from Wuhan. The HQ is divided into two parts, mechanical precision processing factory and equipment manufacturing factory. We have more than 100 sets professional precision processing center, inspection equipment, heavy manufacturing equipment and complete environmental protection treatment equipment. Craun Tec. focuses on the technology R&D on the field of solid-liquid separation, and has the independent R&D and fast & efficient system solution capabilities, it is a global professional manufacturer integrating system design, technology R&D, production and sales and after-sales service.

Oil ang gas drilling (Drilling mud recycling system, drilling waste management, comprehensive disposal for oil sludge, mud comprehensive treatment station, barite recovery system etc.)

Infrastructure construction (HDD mud purification, pipe jacking / TBM slurry circulation, slurry for continuous wall construction’s separation, and mud of pile foundation engineering’s treatment, etc.);

Environmental governance (river / port dredging, remediation of contaminated soil, sorting of construction waste, comprehensive disposal of municipal waste, reuse of sand washing sewage, etc.)

We adopt a complete electronic enterprise production management system, production is strictly in accordance with the API standard, we also have the traceable electronic card for single process. Adhering to the management principle of downstream management and upstream management, we pursue zero defect system delivery.

Vertical system management, continuous simplifying the production processes, improving the efficiency on production & problem solving, taking the fully responsibility for the products we produced.

An Agitator is a equipment used in a tank for mixing various process media together. Media include all liquid types, gases & solids (such as salts, powders, granules etc). In summary, it works by rotating an impeller to impart energy to the media which interact and mix. The components of an agitator in general are the motor & gearbox, shaft & impellers selected for the duty.

An Agitator is used for mixing different process media  – liquids, gases and solids in chemical addition or Pharmaceutical Ingredients. The agitator imparts energy through mechanical mean by rotating a shaft on which there is an impeller designed specifically for the duty. This could be axial pumping, gas induction, flocculating, high viscosity products, high & low shear mixing etc. An agitator is also used in the Water Industry for adding various chemicals to bring the source water up to drinking water standards

An Agitator is generally made up of a three main components –  a shaft with impellers, a mechanical seal and motor with option of gearbox for lower RPM duties.

The agitator is mounted onto the vessel or via a supporting bridge in the water industry. The mechanical seal has a number of options depending on the duty – single/double mechanical seal, dry or wet mechanical seal, gas lift off mechanical seal that is related to the duty involved.

An agitator shaft is connected to the drive unit (motor & gearbox) and where the impellers used for the mixing are welded or bolted onto. There are options for magnetic driven units where there is a hermetic seal as opposed to mechanical.

Agitators can be simplified into Bottom Entry Agitator, Side Entry Agitator and Top entry Agitator Mud Agitator, depending on the duty & scale of the application to be mixed.

90% of Agitators are a Top Entry Agitatorin API / Chemical / Water industries. The main advantages of a Top Entry Agitator is that it can handle a larger variance in viscosities and specific gravities and also the fact that the mechanical seal is not in the liquid.

The remaining 10% include Bottom Entry Agitator, Side Entry Agitator and Bottom Entry Mag Drive Agitator. Milk silos & very large holding tanks use side entry agitators not necessarily for mixing but to keep the process media moving and keep the milk cool while bottom entry agitators are more common in the Biotechnology sector, where it is a magnetic driven unit (see below).

Depending on the industrial sector the customer is in, the mechanical & material suitability for each application can differ greatly. Each of the applications have a typical impeller type that is suited to deliver the turbulence necessary to mix the ingredients.

Tank mixers are sized by taking into account the conditions of the application & industry. This impacts material selection, electrical & mechanical loading and performance criteria. The customer will generally have a starting point and we work with them to build a picture of the overall requirement.

A slurry agitator is often used to keep the solids in suspension to prevent settling out and forming on the base of the vessel or bulk tank before being transferred to the next stage of processing.

Standard Hydrofoils: these impellers are axial flow high efficiency  general purpose – they are designed to offer mixing with low Power requirements. They are also low shear and will not damage sensitive process media.

Wide Blade Hydrofoils: these impellers are axial flow high efficiency –  general purpose – they are designed with higher pumping in mind in comparison to the Standard Hydrofoils impellers. They are low shear and they use more power however they would still use less power in comparison to the  Pitched or Straight Blade Turbines.

Straight Blade Turbines: are radial flow impellers, they are also high shear and are used for suspending solids where uniform suspension is required or for moving heavy liquids off the bottom of Tanks. Some applications of this are in the biotechnology sector.

RCI (Retreat Curve Impellers): can be used on Glass Lined Tank/Agitators, they offer lower shear than the Straight Blade Turbines with lower power requirements. They are usually used as a Bottom Impeller because they can be positioned very close to the curve of the bottom dish of the Tank, the blades curve upwards and they are also curved towards the end of the blades.

Saw Tooth Disk or Dispersion Blade Impeller: is used for High Shear applications as they create lots of turbulence for breaking down solids. Typically used in the food sector, paints and other abrasive applications.

As the viscosity of the liquid media increases, the effectiveness of axial impellers decrease. For these applications, you use a number of impeller types better suited. These include Anchor, Helical coil and Transitional flow impellers

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

This website is using a security service to protect itself from online attacks. The action you just performed triggered the security solution. There are several actions that could trigger this block including submitting a certain word or phrase, a SQL command or malformed data.

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.