mud agitator sizing for sale

Derrick mud agitators include an explosion-proof, “C” faced motor, reduction gearbox (helical-bevel gears for horizontal agitators or all helical gears for vertical units), impeller, and shaft with assembly bushings. Motors range from 5 to 30 HP and may be supplied in several power configurations.

Attaching the motor directly to the gearbox protects correct alignment that can increase bearing life and provides 95 percent efficiency in power transfer to the impeller. Using this superior design surpasses standard worm drive gear assemblies by 30 percent, allowing Derrick agitators to do the same work at far less horsepower. By unitizing the motor and gearbox, weight and space requirements are reduced. Horsepower, mechanical configuration, impeller diameter, and shaft length are customized to tank dimensions and maximum mud weights. Available horsepower ratings* are: 5, 7.5, 10, 15, 20, 25, and 30.

For contour impeller applications, values must be significantly faster (i.e., smaller numbers) to achieve the same results, but because of the impeller design, air entrainment is less probable. In symmetrical compartments, the fluid has a nearly equal distance to travel from the center of the impeller shaft or from the impeller blade tip before it contacts the vessel wall. Agitators should be placed where the shaft is centered in the tank or compartment.

TSC mud agitators are an important part of the mud solids control system. TSC offers a variety of motor and impeller sizes to fit specific tank configurations.

We present to you a line of very efficient and highly productive Agitators that are used in various industries. We make use of a variety of the choicest materials like steel, stainless steel, hastelloy and titanium in the manufacture of these agitators. We offer this type in technical specifications as per your requirements.

Adinath designs and manufactures assorted types of Anchor Type Agitators and also customized turbines in accordance with the requirements of the process. The height and the sweep diameter of the turbine are carefully ascertained for competent dispersion of the reactants and homogenous mass. The Agitators are dynamically balanced to guarantee weight balance at high rpm, thereby increasing the agitator and motor life. These types of Agitators are used if dispersion is required at high rpm.

Along with the ability for Design and Fabrication of Agitator For Process Vessels, we offer complete mixing agitators, chemical agitators, mixers, blenders, reactors with shortest deliveries for trouble free lifelong operations

The Agitator provides rugged reliability along with the flexibility to meet your specific needs. Design features include a rugged cast iron gearbox housing helical bevel gearing which runs more smoothly than standard worm gears for cooler, more efficient operation and longer life. The unit’s unique lower bearing configuration allows maintenance from to top of the tank, eliminating the need for in-tank inspections. Lower bearing seals are arranged to maintain a grease pocket supplemented by four rings that ensure the gears are continually bathed in uncontaminated lubricant. Our unique shaft coupler is the strongest, most reliable in the industry. Available in vertical and horizontal configurations with a choice of canted or hydrofoil impellers in carbon or stainless steel.

• The Agitator features a rugged cast iron gearbox that houses helical bevel gearing. The gear sets are precisely ground to prevent all but the slightest amount of backlash in the gear sets. This feature promotes longer life by eliminating the high

• Internal gears and bearings are lubricated with mineral oil. When the ambient temperature drops below 23ºF or rises above 140ºF, a synthetic lubricant should be substituted. A unique feature of the Agitator is the lower bearing, which can

Drilling mud agitator is a device mounted on mud tank for agitating the drilling mud to prevent the drilled cuttings and fine solids from sedimentation. Nearly every large compartment of mud mixing and storage tank should be equipped with mud agitators to maintain the proper properties  of drilling mud that will pump back to the borehole.

The oilfield mud tank agitator is configured with an explosion-proof motor, reduction gearbox, impeller, and shaft with assembly bushings. Canted blade impeller are commonly used.  Horsepower, mechanical configuration, impeller diameter, number of impeller and shaft length are customized to tank dimensions and maximum mud weights. Here is a list of our recommended configuration.

Savona Equipment is your source for New, Used, and Reconditioned Industrial Agitators and Mixers for processing products in the mining, chemical, food, pharmaceutical and cosmetic industries by mixing liquids together, promoting the reactions of chemical substances, keeping homogeneous liquid bulk during storage and increase heat transfer (heating or cooling). RefurbishedIndustrial Agitators and Mixers parts will be fully repaired or replaced.