mud pump nov pricelist

The NOV FC-1600 Triplex Mud Pump is made of rugged Fabriform construction and designed for optimum performance under extreme drilling conditions. It is compact and occupies less space, yet delivers unequaled performance. The pumps are backed by several decades of design and manufacturing experience, and are considered leaders in the field.

NOV FC-1600 Triplex Mud Pump is conservatively rated at relatively low rpm. This reduces the number of load reversals in heavily stressed components and increases the life of the fluid end parts through conservative speeds and valve operation.

The NOV FC-1600 Triplex Mud Pump design provides an inherently balanced assembly. No additional counterbalancing is required for smooth operation. No inertia forces are transmitted to the pumps’ mountings.

A Triplex Mud Pump sometimes referred to as a drilling mud pump or mud drilling pump. NOV FC-1600 Triplex Mud Pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling.

NOV 12-P-160 Mud Pump is rated at 1600 input horsepower (1193 kw) at 120 strokes per minute, with a 12-inch (304.8 mm) stroke. Multiple liner sizes allow pressures and volumes to handle circulation requirements in deep drilling applications.

Flexibility: Compact engineering provides higher efficiency in less space. The NOV 12-P-160 Triplex Mud Pump light weight and flexible design make it easily adaptable to a variety of rig configurations. This provides flexibility as drilling requirements and conditions change.

Fluid End Modules: NOV offers a choice of fluid end modules and valve covers for every P Series pump model to select the fluid end module that exactly matches drilling requirements. All pump models can be equipped with either the standard or premium forged, two-piece interchangeable fluid modules

Welcome to Pickett Oilfield’s mud pumps web page. Our company has been in the oil & gas drilling equipment industry for over 38 years, supplying new and used mud pumps and mud pump parts to customers in practically every producing region in the world. We are here to serve all your drilling equipment needs – if you don’t see it on this site, just give us a call or email. We can get it, if you need it!

Pickett Oilfield, LLC offers prospective buyers and extensive selection of quality new and used oil & gas drilling equipment, including mud pumps and parts to choose from at competitive prices. Browse our inventory of mud pumps and mud pump parts for sale at competitive rates.For more information or to request a quote, please Contact Us at 936-336-5154 or email to Sales@PickettOilfield.com.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

A mud pump is a reciprocating piston or plunger device designed to pump drilling fluid under high pressures and volumes down the drill string of a drilling rig. The main functions of drilling fluid are to provide hydrostatic pressure to prevent formation fluids from entering and to stabilize the bore, to keep the drill bit cool and clean, to carry drill cuttings back out to the surface, and to suspend the drill cuttings while drilling is paused or during the pullback process.

Mud pumps consist of two main sub-assemblies- the fluid end and the power end. The fluid end performs the pumping process with valves, pistons, and liners, or plungers and stuffing boxes- depending upon the type used. These components are considered expendables, and are designed to be easily replaced in the field. The power end contains the eccentric or crankshaft, along with the connecting rods, and cross heads/slides.

Tulsa Triplex is a Tulsa Rig Iron company. We manufacture pumps from 100 to 600 horsepower that are designed to be easily maintained and are capable of being completely rebuilt. Our pumps feature a smaller footprint and lighter weight than competing models, making them completely legal load size and weight in most instances. They are available as a bare pump, with chainbox, or a complete skidded package.

We Propeller Pumps from 2009 are engaged in Manufacturing Wholesaling Exporting and Retailing the Centrifugal Pumps Axial Flow Pumps Chemical Pumps Sump Pumps PP Pumps Pump Accessories Feed Pump Slurry Pump Turbine Pump Impeller Pump Mixed Flow Pump End Suction Pump Self Priming Centripetal Pump

We know that cost savings on identical spare parts is important for offshore rig Companies today. Therefore we provide our services and spare parts at considerable cost reductions compared to sourcing from the major OEMs. Tratec can guarantee identical parts with all required part certificates. We maintaing the highest quality, using state-of-the art service facilities and experienced, specialist mud pump engineers for service work.

Tratec has supplied more than 20 mud pump spare part, overhaul and recertification projects the last 5 years. References include rig companies Odfjell Drilling, Maersk Drilling, Archer, Saipem, KCA Deutag, and others.

Tratec can supply overhaul and parts compatible with the following Mud Pump makers and trademarks: National Oilwell Varco (NOV), MHWirth, Continental Emsco, Gardner Denver, Lewco, Drillmec, and others. Tratec is an independent supplier of drilling equipment parts. Tratec is neither a licensee, nor is affiliated with any of the named original equipment manufacturers (OEM). The manufacturer’s names, equipment names, or trademarks used herein are solely for identification purposes, and are not intended by Tratec to cause confusion as to the source, sponsorship, or quality of the parts supplied by Tratec. The original equipment manufacturers named above and throughout this website do not sponsor, promote, warranty or endorse Tratec’s supply of parts.

14-P-220 Triplex Mud Pump Specifications LINER SIZE (INCHES) 9 8 7½ 7 6½ 6 5½ 5 MAX DISCH. PRESSURE, PSI OF 14-P-220 WITH HIGH PRESSURE FLUID END 2795 3535 4025 4615 5360 6285 7475 7500 SPEED (SPM) INPUT (HP) **HYD (HP) GALLONS PER MINUTE *105 *2200 1980 1215 960 843 735 633 540 454 375 80 1676 1509 925 731 643 560 483 411 346 286 60 1257 1131 694 548 482 420 362 308 259 214 40 838 754 462 366 321 280 241 206 173 143 VOLUME/STROKE (GALLONS) 11.57 9.14 8.03 7 6.03 5.14 4.32 3.57

10000 Richmond AvenueHouston, Texas 77042 NATIONAL OILWELL VARCOUnited StatesPhone: 713 346 7500Fax: 713 435 219514-P-220 Triplex Mud Pump

In an industrial espionage case wedged somewhere between the worlds of James Bond and Austin Powers, National Oilwell Varco LP (NOV) has won its legal battle against Mud King Products Inc.

Houston’s Mud King will pay NOV nearly $400,000 in a case involving the theft of NOV’s blueprints by the third-party parts supplier. NOV had sought nearly $7 million in damages.

"We are happy to see the bankruptcy court made Mud King pay for wrongfully bribing an NOV employee and stealing NOV"s trade secrets, although we"re disappointed that Mud King"s press release to the public failed to fully explain what happened in their bankruptcy," said NOV attorney John Zavitsanos.

Mud King attorney Suzanne Lehman Johnson said the company vigorously denied that the mud pump part drawings from the 1960s and 70s at issue were trade secrets.

Johnson said Mud King, a 30-person shop, technically lost against NOV, a massive company with tens of thousands of employees–but it was a pyrrhic victory.

“NOV spent over $2.3 million to prosecute this lawsuit for $75,000 in actual damages,” she said. “This was a tough case, hard fought, with a lot of time and energy better spent elsewhere.”

Mud King was accused in a September 2012 lawsuit of stealing drawings of NOV’s mud pumps by paying off an NOV employee. Mud King eventually stalled the civil lawsuit by filing for federal bankruptcy protection, NOV argued.

In August, NOV said it received an anonymous letter from an “outraged Mud King employee” who alerted the company that NOV’s proprietary engineering mud pump blueprints were being stolen, according to a civil suit filed in Harris County District Court.

The large, reciprocating pumps are used to push heavy drilling fluid or mud at high pressures into a drill hole and back up. NOV controls about 70% of the market share for mud pump replacement parts.

A Mud King employee asked his sister-in-law, who worked at NOV, to provide him blueprints by leaving them on his kitchen table in exchange for about $1,000, federal court records show.

“Mud King boasts on its website that it sells mud pumps and mud pump parts that are 100% equivalent to the original equipment manufacturer,” NOV’s suit said. “But telling the truth about Mud King’s dirty tactics would have a negative effect on Mud King’s business.”

NOV also notified the FBI, which led to NOV being allowed to sift through Mud King’s computers. NOV found Mud King had stored hundreds of its drawings. Many of the mud pump drawings in question were developed in the 1960s and 1970s before NOV acquired the companies that made them.

NOV argued Mud King’s bankruptcy was a delaying action, it said it court documents. One of Mud King’s operating reports showed assets of $18.1 million and $3.9 million in liabilities.

Federal Bankruptcy Judge Karen K. Brown ultimately tried the trade secrets case. She ruled that NOV failed to prove some of its claims, including unjust enrichment and violations of the Computer Fraud and Abuse Act but succeeded in showing Mud King had misappropriated some trade secrets and violated the Texas Theft Liability Act.

Brown said NOV’s drawings were stolen for Mud King and that the company undisputedly sold parts it manufactured with the aid of NOV’s trade secrets. Mud King used 23 NOV drawings to improve its own parts, selling 15 of them.

“NOV does not know what part design information is sent to which vendors,” Brown wrote in her ruling. “NOV does not retrieve design information from either current or previous vendors.”

Named Mud King defendants asserted their Fifth Amendment rights and refused to testify. The company admitted it used 23 NOV drawings in its collection to make 81 parts, some of which it sold in 2011-12 for net profits of $64,000, court documents say.

NOV was awarded $74,434.95 for the parts Mud King sold, but was denied more than $2 million in exemplary damages and $4 million for NOV’s estimates of what it would cost to reverse engineer 204 parts for blueprints.