double diaphragm mud pump brands

Double-diaphragm pumps are highly versatile and designed to handle tough jobs like pumping chemicals, slurry, concrete or barrels of water. They provide an efficient, low maintenance solution for a range of industrial applications including mining, oil & gas, wastewater treatment, pulp and paper, and pharmaceutical. Since AODD pumps use compressed air instead of electricity, they are safe to use with and around hazardous substances.

Air operated double diaphragm pumps are relatively easy to set up and relocate for different application uses throughout your plant. They are practically leak-free and can run dry since they do not contain internal seals or components that require lubrication.

For the pump function properly, the pressure of the compressed air supply must be equal to or greater than the pressure of the substance being pumped. Double diaphragm pumps are also noisier and create more vibrations than mechanical pumps. Therefore, they should not be used near sensitive machinery or devices.

Pumping Solutions is fully stocked and ready to deliver AODD pumps to meet a variety of industry-specific applications. Because the recommended uses of our specific pump models vary based on size, we have included additional information on our range of Wilden AODD pump models. Not sure where to start? Contact a Pumping Solutions expert and we can find you the right pump for your application.

The hyper-efficient ¼” air diaphragm pump design can reliably handle everything from food-grade products to highly viscous substances. The ¼: pump can handle sludges and slurries and is perfect for applications that require precise handling and efficient operating resources.

Wilden ½” air diaphragm pumps utilize reciprocating elastomer diaphragms and check valves for pumping fluid, oil, viscous fluids and slurries. The 1/2” air diaphragm pump has excellent suction characteristics for handling a high amount of grit and solids, making it a popular choice for mining applications.

Wilden’s 1 ½” air diaphragm pump is specifically designed to move, handle and transfer large volumes of viscous bulk fluid products. These pumps have optimized liquid paths to reduce friction and maximize output while transferring harsh chemicals, abrasive fluids and hard-to-transfer liquids.

The large 2” diameter can improve the transfer of sludges, slurries, abrasive fluids, oil and mineral-related products by utilizing simple diaphragm changing capabilities and a leak-free design.

Wilden’s 3” pumps are our highest capacity AODD pumps and can handle sludges, slurries and other liquids with a with high amount of grit and solid content.

Double diaphragm pumps are self-priming and typically used in low-pressure fluid transfer applications. They are compatible with dirty, contaminated, and viscous fluids and used for applications such as:

We offer a range of pumps from Wilden, a leading and trusted double diaphragm pump manufacturer. In 1955, a man named Jim Wilden invented air-operated double-diaphragm pump, and since then, the name “Wilden” has been synonymous with excellence.

Our catalog features Wilden double-diaphragm pumps ranging in sizes from ¼” to 4” with an option of Buna-N, Wil-Flex, Teflon, Saniflex, or Neoprene elastomers. Pump material and elastomer options vary depending on the pump size selected.

We’re a leading supplier of air operated double diaphragm pumps on the West Coast. With representation in Arizona, California, Idaho, Montana, Washington, and Northern Mexico, we can get you the double-diaphragm pump you need – fast. Contact us for double diaphragm pump and filtration equipment options.

Why choose the MWI Double Diaphragm water pump? Its rugged design is strong enough to get through the toughest materials, including solids as large as 3.75”. Because it is portable, flexible, lightweight, and easy to set up, this pump is favored for many operations. Featuring a flex coupling, this diaphragm water pump can be completely disassembled for thorough maintenance checks and cleanings. Even the most challenging environments are no match for this double diaphragm water pump.

Powered by Honda GX120 Commercial Engine gas. Replaced by newer model 338G-96. AMT 2" Diaphragm pumps features 2-stage, 44 to 1 gear reduction with a large diameter output gear and heavy duty ball bearing construction. Often referred to as Mud pumps, mudhog or Sludge pumps, diaphragm pumps are designed to pump mud, slurry, sewage, and thick water liquids that have the ability to flow. AMT IPT Diaphragm pumps are available with a choice of drivers to meet your application requirements. Phelps HoneyWagon Wastecorp

Honda gasoline engines. Built-in molded polyurethane flapper/check valve assures self-priming to 20 feet after initial prime. Heavy duty gear box is designed to operate pumps at 60 strokes per minute. Each unit includes a 2" NPT steel suction strainer, two 2" NPT nipples, and wheel kit with 10" semi-pneumatic transport wheels for portability. Pumps are designed for use with non-flammable liquids which are compatible with pump component materials. Mud Trash pumps Suction and discharge port size cannot be reduced.

Suction and discharge port size cannot be reduced. Due to positive pumping action of diaphragm pumps, by all mfr"s, the discharge is recommended to only be 25FT long unless oversized. Discharge can not be restricted. There is no relief valve.

15 Models below. Made in USA. Gas, Diesel or Electric diaphragm pump, or mud / sludge pump. Easily maneuverable, the gas diaphragm pump is built for performance; Ideal for seepage dewatering, high suction lift, cleaning septic tanks, pumping industrial waste and marine tanks, small wellpoint systems and dewatering in sandy, muddy waters. Honda or Briggs gasoline engine or Electric diaphragm pump with motor.

Diaphragm Mud pump Suction & discharge port size cannot be reduced. Cast aluminum construction with thermoplastic rubber diaphragm. Also called a mudhog. 90 degree rotatable base on all models to fit through narrow gates. As a alternate in a centrifugal pump dredge pump design see 316F-95 2" mud pumps. Trash pumps, centrifugal Dredge Pump. Hoses and accessories.

All-purpose solenoid-driven metering pump for metering liquid media in water treatment and chemical processes: Solenoid-driven metering pump Beta®. ...

The new solenoid diaphragm metering pump gamma/ X is user-friendly and has an outstandingly long service life, just like its predecessor. An ingenious solenoid control measures the back pressure and protects ...

The new solenoid-driven metering pump gamma/ XL is the enhancement to our proven gamma/ X and covers a capacity range from 8 – 80 l/h at 25 – 2 bar. The gamma/ XL also has other interfaces, for example CAN bus and Wi-Fi ...

The FLUX air-operated diaphragm pump RFM/RFML are self-priming and protected against dry running. The pumps are distinguished for its versatility and can be used for pumping low to high ...

The FLUX air-operated diaphragm pumps FDM in injection-moulded version are self-priming and protected against dry running. The pumps are distinguished for its versatility and can be used ...

... piston diaphram pump is a crankshaft driven double-acting piston diaphragm pump designed for high-pressure pumping of abrasive and corrosive slurries.

... GEHO® TZPM pump is a crankshaft driven high pressure piston diaphragm pump designed to handle abrasive mineral ores, tailings slurries and mine water.

... DX70 is a high specification, air powered, 1:1 ratio, double diaphragm pump specifically developed for the direct supply of paints and materials to spray guns. The pump features a unique ...

Available in aluminium and stainless steel this versatile 1 air operated double diaphragm pump is ideal for pumping a variety of waterborne and solvent based coatings including; Adhesives, catalyzed varnishes, ...

... air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece centre section eliminates leaks and reduces maintenance on Husky pumps ...

The LPM Series fixed volume dispense pumps are solenoid driven, positive displacement pumps that deliver accurate and repeatable volumes of fluid. This series is available in 10 µL and 25µL standard models, ...

The LPL Series fixed volume dispense pumps are solenoid driven, positive displacement pumps that deliver accurate and repeatable volumes of fluid. This series is available in 50 µL standard models, with ...

LPD Series variable volume dispense pumps are a new generation of stepper motor driven, positive displacement pumps designed to provide unparalleled reliability a nd performance at an economical price. ...

The ARO 1½” EXP Metallic is a diaphragm pump that is 20 to 40 percent more efficient than its competitors. Its compact, durable design with the housing constructed of aluminum, cast iron, stainless steel, ...

... set of features found in other pump technologies. You get the versatility of a diaphragm pump with the efficiency and controllability of other positive displacement technologies.

KNF diaphragm liquid pumps combine maximum performance with minimum size. The use of chemically resistant materials enables the pumps to convey virtually any type of liquid, whether neutral ...

... ecoflow diaphragm metering pumps can be configured with various pump heads and drives for almost all applications. Here, we set technological and qualitative standards: Each ecoflow diaphragm ...

... tried-and-tested modular system, ecoflow diaphragm meter pumps in sanitary/hygienic design can also be configured with various pump heads and drives for almost all applications as food ...

... of aluminum, while the diaphragms used are of high quality NBR that allow the transfer of oil with high viscosity, even with solid parts in suspension, such as used oil.

The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, ...

The VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum ...

The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum ...

... performance, the stroke frequency can be adjusted manually or via an external control contact. The dosing pump is compact and, thanks to the small mounting area, can be integrated into ...

... performance, the stroke frequency can be adjusted manually or by an analogue input signal (0/4 – 20 mA). The dosing pump is compact and, thanks to the small mounting area, can be integrated ...

... metering pump, also known as the MACROY® pump, is now NSF/ANSI 61 and 372 certified for municipal compliance and safety assurance. Capable of handling pressures up to 175 psi (12 bar) and flow rates ...

Diaphragm pumps R. 1:1 for transferring, made entirely of die-cast aluminum; they ensure lasting and reliable operation with the most common automotive and industry fluids.

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models ...