hhf 1600 mud pump brands

F SERIES mud pump . HHF 1600 mud pump (832) HongHua Group ( HH) HHF series mud pump is tough and field proven, is specifically equipped to meet almost any customer requirement. We have provided more than 1000 sets in the world . wide. This is backed by our warranty and field support program. And the HHF 1600 pump is one of the most acceptable and developed mud pump . HHF 1600 mud pump is made of high quality material, according to API 7K specification. And HHF 1600 mud pump is a kind of F series, triplex single acting piston mud pump .

F SERIES MUD PUMP. HHF 1600 Mud Pump (832) HongHua Group ( HH) HHF series mud pump is tough and field proven, is specifically equipped to meet almost any customer requirement. We have provided more than 1000 sets in the world . wide. This is backed by our warranty and field support program. And the HHF 1600 pump is one of the most acceptable and developed mud pump. HHF 1600 mud pump is made of high quality material, according to API 7K specification. And HHF 1600 mud pump is a kind of F series, triplex single acting piston mud pump. The seal packing, bearing and connection size are exchangeable with EMSCO F 1600 mud pump. Specification Rated input power 1600HP (1193 KW). Rated Stroke 120 SPM. Max. liner Di a. 7 ( mm). Rated Stroke distance 12 ( mm). Gear Ratio: 1. Suction pipe size: 12 ( ), Flanged Discharge pipe size: API 5 1/8 Flanged, 5000psi Max. discharge pressure 5000psi ( Mpa).

1 F SERIES MUD PUMP. HHF 1600 Mud Pump (832) HongHua Group ( HH) HHF series mud pump is tough and field proven, is specifically equipped to meet almost any customer requirement. We have provided more than 1000 sets in the world . wide. This is backed by our warranty and field support program. And the HHF 1600 pump is one of the most acceptable and developed mud pump. HHF 1600 mud pump is made of high quality material, according to API 7K specification. And HHF 1600 mud pump is a kind of F series, triplex single acting piston mud pump. The seal packing, bearing and connection size are exchangeable with EMSCO F 1600 mud pump. Specification Rated input power 1600HP (1193 KW). Rated Stroke 120 SPM. Max. liner Di a. 7 ( mm). Rated Stroke distance 12 ( mm). Gear Ratio: 1. Suction pipe size: 12 ( ), Flanged Discharge pipe size: API 5 1/8 Flanged, 5000psi Max. discharge pressure 5000psi ( Mpa).

2 Max. discharge flow 780 gpm ( L/s). Valve chamber size: API 7 . Lubrication: Forced and splash Discharge flow and pressure: please reference table 1 and table 2. Page 1 of 4. Table 1: Pressure parameter for mud pump HHF 1600 . Diameter of Liner 7 6 6 6 5 5 . Rated pressure 3430 psi 3690 psi 3978 psi 4668 psi 5000 psi 5000 psi (MPa-psi MPa MPa MPa MPa MPa MPa Table 2: Discharge parameter for mud pump HHF 1600 . Discharge capacity Stroke Rated power GPM. (spm). kW HP 7 6 6 6 5 5 . 130 1293 1734 780 725 672 573 481 398. 120* 1193* 1600 * 720 669 621 529 444 367. 110 1094 1467 660 613 569 485 407 337. 100 995 1334 600 558 517 441 370 306. 90 895 1200 540 502 465 397 333 275. 80 796 1067 480 446 414 353 296 245. 70 696 933 420 390 362 308 259 214. 1 - - Notes: as per volumetric efficiency (100%) and mechanical efficiency (90%). 2.* shows rated stroke numbers while operating. page 2 of 4.)

3 Dimension Transport dimension Length 15" 1 ( 4065mm). Width 8" 2 (2505mm). Height 6" 8 (2030mm). Weight ( without damper) 57540 lbs (26100 kg). Page 3 of 4. Equipment scope Mud pump with a liner Damper and safety valve Equipped with Hoister. Completed with spare parts , special tools and fits We also maintain spare parts for you all requirements. Please contact us if you need more information! HongHua , America, LLC. 8300 McHard Road, Houston, TX 77053. Tel : (832) Fax : (832) E mail: sales@hh Website: Page 4 of 4.

Stock includes:•Complete 4 stroke Main and Aux engines•Cylinder Spares and attachments of 2 & 4 stroke Main Engines•Turbochargers, Heat exchangers, Separators, Air compressors etc.•A/C Compressors, Transfer Pumps, Fresh Water Generators, Purifiers, Hydraulic Equipment, Safety Equipment•Radio Room and Bridge Equipment

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

‘ancl then locked down to avoid the preset pressure changing.‘Upon builtin installation of the lube oif pump, as shown item 9 in Figure 13, the pump mast be

1 The cylinder (block) (fluid end) of HHF-1300/1600 and FB-1300/1600 can be interchanged, but the start place of screw hole of 12x1-14UNS-2B is different (place for wear ring connection),, 2 The clamp assembly of piston rod of FB-1300/1600mud pump can be used for HHF-1300/1600mud pump, contrarily, The clamp assembly of piston rod of HHF-1300/1600 mud pump can not be used for FB-1300/1600mud pump. (because the clamp assembly of HHF-1300/1600 has no thread to connect spray line

The Baoji/Bomco F1000 Triplex mud pump has a max. working pressure of 5,000PSI and a 6-3/4" liner size. This model is the first choice for the medium and deep dr... More Info

The Baoji/Bomco F1600HL Triplex mud pump has a max. working pressure of 7,5000PSI and a displacement of 46.5L/S with 6" liner size. This model is the f... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Emsco/Bomco 1600 Mud Pump, Unitized 1600 Mud Pump Powered by Two GE 752 Motors Charging Pump, Liner Flush Pump, Relief Valve, Mud Gauge, Etc. ....Call For Price More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

Mud Pumps - 1 - Rebuilt Gardner Denver PZ-9 Mud Pump Package, New Caterpillar C-27, 1050 HP diesel engine. Belt-driven. comes with pulsation dampener, discharge block, precharge, li... More Info

Mud Pumps - 1 of 3 used Gardner Denver PZ-8 triplex mud pumps. This would be a good rebuildable core. We also have new, rebuilt and good used pumps and packages available for sale ... More Info

Mud Pumps - Mud Pump Parts & Complete Units: Liners, Pistons, Rubbers, Rods, Valves, Seats, Springs, Inserts (Bean, BJ, CAT, EMSCO, Ellis Williams, FMC, Failing, GASO, Gardner Denver... More Info

A wide variety of hhf 1000 mud pump options are available to you, You can also choose from new, hhf 1000 mud pump,as well as from energy & mining, farms, and restaurant hhf 1000 mud pump,And whether hhf 1000 mud pump is provided, {2}, or {3}.