mud pump hose factory

Series 7309 is a heavy duty, high pressure discharge hose designed to handle drilling mud, mild chemicals, petroleum waste and water. The hose construction incorporates a heavy wall for durability and a static wire as a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, heat, mild chemicals and weathering. Series 7309 is available in 200-foot continuous lengths.

Series 7309 is a heavy duty, high pressure discharge hose designed to handle drilling mud, mild chemicals, petroleum waste and water. The hose construction incorporates a heavy wall for durability and a static wire as a path to conduct a static electrical charge to ground. The cover is resistant to abrasion, heat, mild chemicals and weathering. Series 7309 is available in 200-foot continuous lengths.

High-pressure mud hose also called rotary hose, vibrator hose or jumper hose, is used to convey drilling fluid from mud pump to the mud standpipe manifold on the drill floor. It is available in bore sizes from 2" to 6" and up to 120 ft. length. To meet different requirements on the market, API end fittings such NPT thread and flange and other specified fittings are supplied.

Mud delivery hoses are lined with specially compounded synthetic rubber tube and cover. They have excellent resistance against abrasion and corrosion from oils.

Explore a wide variety of mud pump hose on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These mud pump hose are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these mud pump hose is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right mud pump hose for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of mud pump hose to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.

Heavy wall thickness reinforced with multiple woven textile plies and static wire is used by HIC Universal in manufacturing drilling rotary hose pipe product, fully tested as per IS and international standards that covers full testing in well-equipped HIC’s Testing Laboratory and stamped with identification coding.

Warranty: Manufacturer warrantees mud pump hoses to be free from manufacturing defects and shall replace or repair if found defective in workmanship within 1 year from the date of shipment.

Roll Lengths manufactured are 3 meters Min. (= 9.85 feet Approx.) and 20 m Max up to 5inch Inner Diameter size hose. Above 125mm (=5”) NB, Max. Length produced is 10 meters.

Orient flex imported most advanced industrial hose production line from Italy,13 braiding machine are automatically computer controlled, large diameter dredging hose production line are designed by Italian engineers.

Mining Slurry Hose. Pure Gum Liner. Tough, rubber, to replace inflexible steel tube. The easy hand and reusable flange system make installation a snap. Absorbs system vibration and saves wear. Compensates thermal expansion and contraction and reduces noise. Flexible connection for hard piping misalignment. In mining and other highly abrasive places, slurry hoses have internal linings to mitigate abrasive wear on the hose. Besides, the main pipelines used in high abrasive pumps are also usually lined with rubber or other material to reduce wear.

The HMI HM-1 hydraulic mudjacking pump was the first concrete raising product engineered and manufactured by HMI, just over 40 years ago. It’s reliability and superior engineering maintains its place in the market, but has also acted as the springboard for other, more advanced models / options which offer various options of engine horsepower, hopper size, pumping pressure, and so much more.

Our largest, self-propelled, multi-functional pump. This rugged and durable pump is the top-of-the-line mudjacking unit. With the highest available pumping pressure, largest material hopper, most horsepower and versatility.

Our most popular model, the self-propelled, hydraulic mudjacking pump drives circles around the competition. Affordable and durable, the Power Pump is a great way to start-up or add to a concrete raising business.

The high pressure hoses are a bonded construction comprising steel and elastomeric materials. The principal characteristic of bonded construction is the build-up of individual layers in the flexible hose wall which are then combined into one unit through vulcanisation. Hose assemblies are manufactured as a single bonded unit to specified lengths where the couplings are a chemically bonded integral part of the hose.

Protects the polymer lining from mechanical damage, prevents blistering in case of high pressure gas service and decompression with vacuum service, supports the wall of the flexible hose. This layer is optional and present only for rough bore hoses, such as for flexible choke & kill lines with TauroFlon™ liner.

Fluid barrier of the flexible line. Protects the hose construction from corrosive and abrasive effects of the conveyed medium. The thickness of lining depends on the internal pressure, the inside diameter and the conveyed medium. The lining material is selected to withstand chemical and heat effects of drilling mud, well effluents, cement slurry, hydraulic fluid or whatever substance is conveyed through the hose.

Hoses have a higher working pressure than normally available chemical hoses. CPE handles a wide variety of acids, alcohols, salt solutions, and petroleum based products.

Lightweight chemical transfer hose designed for almost every common industrial chemical used in industry today (98% of chemicals) without staining / contamination. UHMW handles a wider variety of chemicals than XLPE at virtually the same cost.

Designed for applications that required the hose to slide easily or require visual confirmation of material flow. Great for pumping water and light chemical solutions. Popular with pumping equipment because it handles suction discharge uses.

Lightweight, flexible, rugged suction/discharge hose that has good chemical resistance. Excellent for transferring fertilizer solutions, septic solutions, and pesticides. Hose remains flexible in sub-zero temperatures. Helix serves as a scuff strip.

Economical general service suction and discharge hose used for pumping water and light chemical solutions. PVC helix increases flexibility and abrasion resistance while the smooth interior provides maximum flow.

Designed for water discharge in construction, heavy duty equipment rental, and mines and quarries. Soft-wall hose construction provides similar performance to a layflat hose but a higher working pressure and more abrasion resistance.

Mud discharge hose designed for petroleum waste, drilling mud, diesel, and water. The standard to transfer liquid mud at high pressures from the mud pump.

Designed for use with push-on fittings for air tools, petroleum products, gasoline, mild chemicals or water. No clamps or special tools required. Hose reinforcement laid at the most effective angle for maximum strength and coupling holding ability.

For gravity of electric pumps dispensing of oils, gasoline, diesel, and petroleum products. Typically used with farm or barrel-type pumps where UL approval is not required. Has static wire, designed for use with electric pumps. NOT for gas station use. Only UL 330 listed hose used for gas station use. NOT for aircraft fueling.

Wire braid steam hose for saturated and superheated steam up to 250 PSI 450° F. Cover is pin pricked to allow venting to eliminate blistering and cover separation. Steel wire braids can be utilized as a static wire to make the hose assembly electrically conductive. NOT for use with detergents. DRAIN AFTER USE!

Spray lawns, trees, and similar applications with diluted solutions of water and oil based pesticides and herbicides. Can also handle compressed air. Spray hose for fertilizers, herbicides, and insecticides in the agriculture and lawn care industries. Can also handle water and compressed air.

General purpose hoses for open end discharge. Non-absorbing, mildew proof, and rolls up flat for easy storage and handling. Common in construction, agriculture, irrigation, marine, and rental applications. PVC hoses resistant to oils, grease.

Designed to handle edible liquids, vegetable oils, salad dressings, vinegar, mustard and meat products requiring a sanitary hose which will not impair taste. Great for service with hot oil fat filters and fryers.

For suction/discharge use and allows visual flow inspection. Designed for industrial vacuum pumps, food and beverage dispensing, air and water supply, car wash, coolant lines, and deionized water systems. Meets FDA, USDA, and 3A standards.

Preconnected to pump of an engine (and the booster tank) for putting out small fires near the tank without having to connect to a fire hydrant (brush pumper).

Designed as a hydraulic brake hose for vehicles and motorcycles. The average life of a brake hose is six years. Brake hoses swell with age and restrict flow. Generally all brake hoses on a vehicle deteriorate at the same rate. All assemblies pressure tested to 3,000 psi.

Air Brake Tubing, Steel Brake Line Tubing Assemblies, Steel Brake Line Tubing Coils, Rubber Air Brake Hose, Silicone Coolant Hose, Silicone Heater Hose, GPR Radiator Hose, Rubber Heater Hose, Garage Exhaust Hose, Air Conditioning Hose

Camlocks, Petroleum Handling, Industrial and Oilfield Hose Ends, External Swage Hose Ends (Holedale), Crowsfeet Couplings, Sand Blast Couplings, Ground Joint Couplings, Bauer Style Quick Connects, Ringlock Fittings, Storz, Foot Valves and Strainers, Airline Accessories, Industrial Accessories, Clamps, Pressure Washer, Safety and Protection Products

Available in sizes 1/4″-12″. Operates in high/low temperatures. Fire safety up to 1200° F. No permeation of gases. Full vacuum. Annular is hydroformed, a process that enhances flexibility and extends the life of the hose. Suitable for oils, chemicals, gases, exhaust gases, water, steam, vacuum.

Plug Valves, Swivel Joints, J-55 and N-80 Pup Joints, Integral Fittings, Steel Hose Loops, Crossover Adapters and Swages, Blast Joints, Manifolds, Bull Plugs and Caps

37° JIC, Pipe, Pipe Swivel, O-Ring Kits, O-Ring, Split Flange, Face Seal, Hose Barb, Flareless Bite Type, Metric, BSPP, BSPT, Inline Live Swivel, 90° Live Swivels, 90° Dual Plane Live Swivels, Test Points, Thread ID Kits

Inverted Flare, SAE 45° Flare, Compression, Self Aligned, Polyline Flareless, Push-Connect, Push-Connect Air Brake, Compression for DOT, Compression for Air Brake Copper Tubing, Threaded Sleeve, Pipe Fittings, Needle Valves, Drain Cocks, Truck Valves, Ground Plugs, Multiple Shut-Offs, Hose Barbs, Push-On Hose Barbs, Garden Hose Fittings

Qingdao Qingflex Hose Factorywas established in 2008, registered capital 168 million RMB, is located in Qingdao West Coast New District (Huangdao District), is aNational high-tech enterprise,whofocuson R & D and manufacturing hydraulic hose according to DINstandard and SAE standard, Japanese stand and GB standard. Ourfactoryhasmore than 400 workersand own 76000 square meters buildings,We havehigh levelRubber HoseR & D centerand Test center,recognized as Qingdao Enterprise Technology Center,we have Gotech rubber test equipment, Dynamic impulse testing machine, Chemical analysis test equipment and other kinds of test equipment,Our own

Drilling hose(rotary hose)made according to API 7K spec, applies for flexible hose connection between the top of oil drilling stand pipe and vertical moved swivel joint in well drilling, well cementing, work-over and down-hole servicing operation. drilling hose is also used to adjust the installation mistake between drilling pipe line and stand pipe to avoid shake, sometimes to transfer high pressure oil and water base mud with the lowest aniline point of 60°C from the swivel pipe in high pressure, and down-hole operation high medium such as water, oil etc, drilling rotary hose can be used for prefect work too.

Application: Slurry and Mud Rubber Hose for spraying of cement grout at irrigation projects, buildings, sites, dams, bridges and road in hilly terrains.

Electrical Bonding: A strand of copper wire is embedded between the reinforcement plies to provide electrical continuity throughout the length of the hose.

Pressures: W.P. of 1.0 MPa & min. B. P. 4.0 MPa. Application: Slurry and Mud Rubber Hose for spraying of cement grout at irrigation projects, buildings, sites, dams, bridges and road in hilly terrains.

Cergom is a Custom Made Hose with a breakthrough construction that incorporates a unique inner liner of flexible, highly abrasion resistant hexagonal ceramic tiles embedded in abrasion resistant rubber. It is suitable for compressed air and vacuum systems conveying highly abrasive materials such as ceramic powders, coal powders, dry cement, fiberglass, fly ash and raw minerals in harsh applications such as carbon injection, ceramic/ glass works, manufacturing or processing of insulating materials, mines, quarries, power generating facilities and steel works. Maximum working pressure is up to 150 psi. For a superior investment in value and productivity, Cergom hose is the perfect choice for severe applications.

All Custom Made Hose/Cergom hose assemblies now incorporate the Parker Tracking System (PTS), which enables quick and easy identification for product life cycle tracking and improved inventory management. For more information about PTS, visit www.parker.com/pts.

Critical inquiries require immediate responses for technical service, lead times and pricing. Parker has established a toll-free Custom Made Hose hotline for product suggestions, designs and quotations.

Drop-shipping bulky, cumbersome and heavy Custom Made Hose is not a problem with special protective bales, crates, HDPE pipe and slat packaging to ensure undamaged delivery and customer satisfaction.

With vast industrial experience, we are presenting a broad spectrum of Material Handling Hose which is highly demanded by the clients due to its high performance in the market. We manufacture it as per the demands and requirements of the clients to satisfy them completely.

For conveying of solid particles like sand and gravel, dredged mud, cement, bentonite, alumina, silica, coal dust, ash, carbon black, mud slurry, etc by air, water or in the form of slurry at off-shore oil fields, mines, steel plants, coal washeries thermal power plants, cement plants and other heavy duty industrie