mud pump suction strainer manufacturer

1-1/2 inch FNPT Suction Strainer with 1/2 inch round holes. 1.5" Irrigation or sprinkler pump strainer. Also comes in the 1/8" size holes SRHS-200-SM Zinc plated steel. Good for use with sprinkler pumps, irrigation pumps and other centrifugal and semi-trash pumps which can accept limited debris.

These zinc plated round hole strainers can be used with all popular makes of centrifugal pumps for use with hoses and pipes. Drop in to liquid to be suctioned. An "open" area of 50% allows filtering out large damaging debris, yet permits sufficient water passage to keep pumps functioning at full capacity.

For Top Hole skimmer strainers see SSKS-TH or SSKS-BH for Bottom Hole series or SRHS for barrel suction strainers. Image tab belows shows some of the various strainers available from PumpBiz. Please let us know if you do not see what you are looking for or for complete hose kits.

Mud pump is a reciprocating plunger pump, through the crank connecting rod mechanism to convert the rotating motion into the reciprocating straight motion of the crosshead and piston, the low pressure mud compression into high pressure mud.

Traditionally, mud pumps are divided into the liquid end and the power end, which transmits power and changes motion patterns and speeds. Provide appropriate power to the liquid end; The liquid end is used to convert mechanical energy into liquid internal energy to transport mud.

Suction and discharge valves conform to ASA and API specifications, and the piston rod and the intermediate rod are connected with a clamp. The seat hole has a bottom shoulder to prevent seat subsidence. The piston and cylinder liner are lubricated and cooled by spray for extended service life.Easy to realize quick assembly, disassembly and installation.

Explore a wide variety of pump strainer mud pump on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These pump strainer mud pump are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these pump strainer mud pump is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right pump strainer mud pump for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of pump strainer mud pump to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.

A wide variety of mud pump discharge strainer options are available to you, such as 1 year, not available.You can also choose from new, mud pump discharge strainer,as well as from energy & mining, construction works , and building material shops mud pump discharge strainer,and whether mud pump discharge strainer is 1.5 years, or unavailable.

The NOV 12-P-160 Mud Pumps includes (3) Three New National 12-P-160 Triplex Mud Pumps 1600 HP, 7-1/4″ bore x 12″ stroke, single acting. 5000 PSI fluid ends. 1600 HP Bare Mud Pumps are currently configured for Offshore Service. The NOV 12-P-160 Mud Pumps are located in Houston and ready to be unitized for service.

Forged Steel crankshaft, Individual forged steel two piece interchangeable standard modules, 6-1/2” mission fluid king liners, Standard polyurethane valves and seats, Two piece fast change piston rods, Supreme pistons, Metal to metal liner retention, Clamp type liner and piston rod connections, Fast change valve covers standard, Piston liner lubricant spray system, Liner spray pump, Power end lube system with filter. Mounted on Integral two runner skid, Suction Manifold with vertical suction stabilizer, Suction line pressure relief valve, set for 70 PSI

Includes: motor supports, motor frame, tensioning screws, 2 V-belt guards, 2 pump Sheaves, 2 motor sheaves, banded V-belts, Holes to be drilled to accept EDM D79 Or GE-752 Traction Motors

Flange-blind, National, #5912392, for Strainer cleanout, 5-1/8”, 5000PSI, API 6BX blind flange, BX-169, API 60K Material, 4130 steel, PSL-1, T/C-U, M/C-DD

National Oilwell Varco (NOV) is an American multinational corporation based in Houston, Texas. It is a leading worldwide provider of equipment and components used in oil and gas drilling and production operations, oilfield services, and supply chain integration services to the upstream oil and gas industry. The company conducts operations in more than 600 locations across six continents, operating through three reporting segments: Rig Technologies, Wellbore Technologies, and Completion & Production Solutions. National Oilwell’s two main predecessors, Oilwell Supply and National Supply, were founded in 1862 and 1893, respectively. These two companies manufactured and distributed pumps and derricks.

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

The discharge line is the output end of pump, its end is provided with a discharge strainer assembly will mud pump generated pressure directly transported to underground; another end of the pipe with air out package assembly and safety valve and pressure gauge.

With over 10 years developing, we were developed from the beginning drilling service to manufacture factory who produce Mud pump and its spare parts, DST tools and Solid control products.

Kingwell oilfield are able to supply the mud pump and other OEM interchangeable spare parts, kindly contact with us if there has some enquiries, we will quote you a competitive price and fine delivery soon.

Our hydraulic strainers are designed and engineered for versatility and durability, fitting in almost any hydraulic system and meeting some of the most demanding operating and environmental conditions. They are suitable for use in a wide range of industries, including, but not limited to, the following:

Round root and crest pleat designs. Our strainers feature a rounded root and crest pleat design that allows for 100% utilization of the straining area. The design also facilitates the cleaning of the strainer when needed, allowing industry professionals to reuse the strainer several times over.

Suction strainers are employed in hydraulic systems to remove large contaminants from process fluids that can damage system components. They capture and collect the particulates as the process fluid flows through them.

Within hydraulic systems, strainers are generally incorporated within the suction lines to the pump. Compared to other contaminant filtration methods, they are much less flow restrictive, reducing the risk of the suction pressure increasing and causing cavitation within the pump. However, it is essential to regularly remove contaminant buildup from the strainer to avoid clogging up the straining surface area, which can lead to the above problems.

Although the terms “strainer” and “filter” are sometimes used interchangeably—largely due to the similarities in their function—they are distinct components with distinct use cases.

Both strainers and filters are employed to remove contaminants from process fluids in hydraulic systems. However, they differ in regard to the size of the particles they allow to pass through them. Strainers are generally used for contaminants that are 50 microns or greater, while suction filters are utilized with wire mesh, perforated material, and wire screen, for contaminants that are smaller than 50 microns (typically 40 microns or smaller).

At DOMS Incorporated, we provide hydraulic filters and strainers for any application or industry. In addition to our standard product lines, we also manufacture custom strainer solutions for any unique specification. Whether it’s a metric or SAE connection, full flow or bypass valve requisite, or a standard or non-standard mesh, we will handle your customized requirements. We can also incorporate any type of client-specified hardware into the strainer design.

Almost all our units can be furnished with metal components constructed from high-strength 300 series stainless steel for maximum durability and reliability. We also provide thorough inspection, testing, and evaluation services for new and existing strainer units.

At DOMS, we accept any production challenge. We handle large blanket orders with regularly scheduled shipments for up to 12 months—saving your organization time and considerable cost per unit. To find out more details about our strainer solutions, contact our technical team today.