mud pump suction strainer quotation

Explore a wide variety of pump strainer mud pump on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These pump strainer mud pump are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these pump strainer mud pump is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right pump strainer mud pump for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of pump strainer mud pump to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.

A wide variety of mud pump discharge strainer options are available to you, such as 1 year, not available.You can also choose from new, mud pump discharge strainer,as well as from energy & mining, construction works , and building material shops mud pump discharge strainer,and whether mud pump discharge strainer is 1.5 years, or unavailable.

The NOV 12-P-160 Mud Pumps includes (3) Three New National 12-P-160 Triplex Mud Pumps 1600 HP, 7-1/4″ bore x 12″ stroke, single acting. 5000 PSI fluid ends. 1600 HP Bare Mud Pumps are currently configured for Offshore Service. The NOV 12-P-160 Mud Pumps are located in Houston and ready to be unitized for service.

Forged Steel crankshaft, Individual forged steel two piece interchangeable standard modules, 6-1/2” mission fluid king liners, Standard polyurethane valves and seats, Two piece fast change piston rods, Supreme pistons, Metal to metal liner retention, Clamp type liner and piston rod connections, Fast change valve covers standard, Piston liner lubricant spray system, Liner spray pump, Power end lube system with filter. Mounted on Integral two runner skid, Suction Manifold with vertical suction stabilizer, Suction line pressure relief valve, set for 70 PSI

Includes: motor supports, motor frame, tensioning screws, 2 V-belt guards, 2 pump Sheaves, 2 motor sheaves, banded V-belts, Holes to be drilled to accept EDM D79 Or GE-752 Traction Motors

Flange-blind, National, #5912392, for Strainer cleanout, 5-1/8”, 5000PSI, API 6BX blind flange, BX-169, API 60K Material, 4130 steel, PSL-1, T/C-U, M/C-DD

National Oilwell Varco (NOV) is an American multinational corporation based in Houston, Texas. It is a leading worldwide provider of equipment and components used in oil and gas drilling and production operations, oilfield services, and supply chain integration services to the upstream oil and gas industry. The company conducts operations in more than 600 locations across six continents, operating through three reporting segments: Rig Technologies, Wellbore Technologies, and Completion & Production Solutions. National Oilwell’s two main predecessors, Oilwell Supply and National Supply, were founded in 1862 and 1893, respectively. These two companies manufactured and distributed pumps and derricks.

BRAND NEW SURPLUS mud pumps for immediate sale. These are (3) three New National NOV 12-P-160 Mud Pumps 1600 HP, 7-1/4″ bore x 12″ stroke, single acting. 5000 PSI fluid ends. 1600 HP Bare Mud Pumps are currently configured for Offshore Service. These NOV 12-P-160 Mud Pumps are located in Houston and ready to be unitized for service. The pumps have never been installed or used.

Forged Steel crankshaft, Individual forged steel two piece interchangeable standard modules, 6-1/2” mission fluid king liners, Standard polyurethane valves and seats, Two piece fast change piston rods, Supreme pistons, Metal to metal liner retention, Clamp type liner and piston rod connections, Fast change valve covers standard, Piston liner lubricant spray system, Liner spray pump, Power end lube system with filter. Mounted on Integral two runner skid, Suction Manifold with vertical suction stabilizer, Suction line pressure relief valve, set for 70 PSI

Includes: motor supports, motor frame, tensioning screws, 2 V-belt guards, 2 pump Sheaves, 2 motor sheaves, banded V-belts, Holes to be drilled to accept EDM D79 Or GE-752 Traction Motors

Flange-blind, National, #5912392, for Strainer cleanout, 5-1/8”, 5000PSI, API 6BX blind flange, BX-169, API 60K Material, 4130 steel, PSL-1, T/C-U, M/C-DD

SPS83 Suction Strainer is specifically designed for water reclaim and vehicle washing use. Made of a rugged cast iron body and a stainless steel basket, this product pairs with our Prime Line® SP pumps to offer a complete pump and suction strainer option for you. This is designed to fit all Prime Line SP models, as well as other self-priming pumps, and will filter out large particulates from entering the pump, enabling you to ensure your water needs are met.

1-1/2 inch FNPT Suction Strainer with 1/2 inch round holes. 1.5" Irrigation or sprinkler pump strainer. Also comes in the 1/8" size holes SRHS-200-SM Zinc plated steel. Good for use with sprinkler pumps, irrigation pumps and other centrifugal and semi-trash pumps which can accept limited debris.

These zinc plated round hole strainers can be used with all popular makes of centrifugal pumps for use with hoses and pipes. Drop in to liquid to be suctioned. An "open" area of 50% allows filtering out large damaging debris, yet permits sufficient water passage to keep pumps functioning at full capacity.

For Top Hole skimmer strainers see SSKS-TH or SSKS-BH for Bottom Hole series or SRHS for barrel suction strainers. Image tab belows shows some of the various strainers available from PumpBiz. Please let us know if you do not see what you are looking for or for complete hose kits.

AllArtificial RocksAeration - Large PondAir Pumps & Aeration KitsAlgae Control ProductsBarley ProductsBenefical BacteriaDecorative Water FeaturesFall & Winter Pond SuppliesFiltersFish Food - Pond Koi & GoldfishFish MedicationsFountain NozzlesKits - Complete PondLightingLiner (EPDM) & UnderlayMosquito ControlPlanting Supplies & FertilizersPond KitsPondless ComponentPond PumpsPumps SubmersibleRenee MongelluzzoReplacement Parts and Filter PadsSaltSkimmer Acces.Skimmers for PondsSludge RemoversSpillways, Biofalls, and WeirsTubing, Bottom Drains, FittingsUltraviolet Clarifiers, Bulbs & ComponentsUV Clairifier Acces.Water ClarifiersWater Conditioners

One of the most important pieces of equipment in many different industries is the filtration system. Within each filtration system are a number of moving parts, which must all work together to ensure the system operates efficiently. Two parts that rely on each other the most are pumps and strainers. As the pump works, the strainer is in place to capture debris to ensure the pump can continue to function as designed.

Typically, when one refers to a hydraulic pump strainer, they are referring to a mesh strainer that is used as a filter at the pump inlet. The purpose of this strainer is to filter contaminants out of the hydraulic fluid as it approaches the suction side of the pump. These relatively coarse filters (about 140 microns) screw onto the pump intake, which is located inside the hydraulic reservoir.

Like we said above, the main purpose of a strainer is to filter out any solid contaminants from hydraulic fluid. If contaminants are left unfiltered, they can damage components of the pump. When the pump is damaged it can lead to lower system efficiency and a shortened lifespan.

That being said, picking the incorrect strainer for your system can also damage the pump. When selecting a strainer, it’s important to first consult the manufacturer recommendations. You also need to ensure you’ve selected the right sized filter, and one that meets your systems pressure and flow requirements. If your strainer fails to meet those requirements, you could potentially cause irreversible damage to your system.

The positioning of your strainer first and foremost depends on the type of strainer your system requires. The two most common types are pump suction strainers and inline filters. Pump suction strainers are a coarse mesh strainer that is used to collect large participles from entering the pump. They are installed at the suction inlet of the pump. Inline filters, sometimes called return line filters or spin-on filters, are installed in the fluid return line. This filter allows for a finer filtration of particles than the pump suction strainer and results in a highly efficient filtration system. Inline filters are not installed on the suction side of the pump because this can cause pump failure from high differential pressure.

Most pumps are designed to handle some number of solids, and the manufacturer can advise you on what size particles your pump can handle and may even have a suggestion on what filtration type is best for the system. Ultimately, the positioning of your strainer will depend on what type of system you have and how fine of a filtration you require.

While the strainer is an important part of a filtration system, there are instances where strainers are unnecessary. If the hydraulic fluid being placed into the system has already been filtered, it is unnecessary for it to be filtered again within the system. Additionally, some new hydraulic systems do not even require a strainer as the updated design minimizes the chance of debris. Though, if proper maintenance isn’t done on the system you could still experience pump damage.

There’s no other way to argue it: strainers are important to a pump system. It’s the choice of a strainer and the positioning of that strainer that can be up for debate sometimes. If you’re questioning where to place a strainer in your system, or what strainer to use, first consult the manufacturer for their recommendations. If you still have questions after that, consult a qualified suction strainer/filter designer.

Strainers are designed to remove large contaminants (defined as 40-microns or greater) from the material being processed. The ratio of mesh to microns changes depending on the number of gaps within one linear inch. For example, 60-mesh strainers typically catch particles around 240-microns, and 100-mesh strainers catch particles sized at 150-microns.

There are a number of different advantages to using this type of strainer. The easy-to-open design of the strainer provides for simple maintenance. Simplex strainers also have a large particle holding capacity with less pressure drop over the length of the filter element.

At Eaton, Simplex Industrial Basket Strainers are designed to be used where it is possible for the line to be shut down for short periods of time to allow for maintenance. Eaton’s standard cast pipeline strainers meet a number of high standards. These include ISO 9001-2008 quality management, reduced purge volumes due to their ultra-low discharge strainer technology, and appropriately sized parts to meet any flow rate and retention requirement. To learn more, check out our website.

The advantages of this type of strainer lie in the price, as Y strainers are commonly low cost. Maintenance for this type of strainer can be a little tricky, and particle retention capacity is low.

One of the biggest advantages of duplex strainers is their ease of maintenance. Not only do duplex strainers have an easy-open design, they are also able to be cleaned individually while one strainer stays on standby. In addition to an easier maintenance, duplex strainers have high particle holding capacity, which provides less pressure drop through the strainer. To get more specifications, peruse our selection of duplex strainers here.

Eaton’s Duplex Industrial Basket Strainer is able to operate on a continuous basis, never requiring the line to stop for maintenance tasks to be performed. This is due to the two baskets being used, which operate independently of one another. Once one of the baskets becomes full, the flow is channeled to the other basket, allowing the full basket to be removed and cleaned out. The design of Duplex Industrial Basket Strainer makes it a great option for applications where lines cannot be shut down for maintenance to take place. Visit our site to learn more.

The main advantage of using an automatic strainer is their self-cleaning capabilities. Because of the automatic nature of the strainer, the cleaning process is never interrupted. Instead, self-cleaning is controlled in a number of different ways, most commonly timers, pressure drop settings, or manually. Contact us today to find out your options.

Gas and oil strainers can be utilized in a number of different areas. Most commonly, strainers are used either in upstream or downstream applications.

Upstream applications include those for drilling oil. Strainers are used in the derrick/mast, drawworks and top drive. They are also used in mud/fuel tanks and within power/pump stations and within the shaker unit.

Strainers are designed to capture solid particles and other solid contaminants within a liquid and stop them from continuing through the system. When functioning properly, strainers help prevent potential damage to other parts of the system, including engines, pumps, nozzles, and heat exchangers. With better performing strainers, cost of ownership decreases while lifecycle of the equipment being used is extended, benefitting producers in the long run.

Duplex Basket strainers are a type of strainer used in horizontal pipework to filter solids from fluids. They are typically designed to allow 100% flow with little pressure drop, and can be maintained in situ due to their design containing valves allowing one side of the unit to be maintained without process stoppage.

Designs consist of inlet a single inlet and outlet with top accessible covers for each strainer allowing easy access to the inner strainer. The central manifold houses a lever enabling control of fluid flow to each side, and closing of each side for maintenance.

SUPPLYING SOLIDS PUMPS GLOBALLY FOR 30 YEARSSUPPLYING SOLIDS PUMPS GLOBALLY FOR 30 YEARSSUPPLYING SOLIDS PUMPS GLOBALLY FOR 30 YEARSSUPPLYING SOLIDS PUMPS GLOBALLY FOR 30 YEARS

HIGH 11M+ LIFT TANK CLEANOUT WITH PRIMEPUMP IN NZHIGH 11M+ LIFT TANK CLEANOUT WITH PRIMEPUMP IN NZHIGH 11M+ LIFT TANK CLEANOUT WITH PRIMEPUMP IN NZHIGH 11M+ LIFT TANK CLEANOUT WITH PRIMEPUMP IN NZ

VACUUM LOADING IT & SOLIDS PUMPING IT IN PERU/NZ/JAPAN/UK/SINGAPORE/USAVACUUM LOADING IT & SOLIDS PUMPING IT IN PERU/NZ/JAPAN/UK/SINGAPORE/USAVACUUM LOADING IT & SOLIDS PUMPING IT IN PERU/NZ/JAPAN/UK/SINGAPORE/USAVACUUM LOADING IT & SOLIDS PUMPING IT IN PERU/NZ/JAPAN/UK/SINGAPORE/USA

*CONTINUOUS* HIGH VOLUME VACUUM LOADING SOLIDS PUMPs*CONTINUOUS* HIGH VOLUME VACUUM LOADING SOLIDS PUMPs*CONTINUOUS* HIGH VOLUME VACUUM LOADING SOLIDS PUMPs*CONTINUOUS* HIGH VOLUME VACUUM LOADING SOLIDS PUMPs

Our vacuum loading solids pumps are manufactured in 316 SS as standard and feature no internal workings, they are 100% air operated, tough as nails and IECex zone rated.

Smart, mobile pumps that feature powerful vacuum & discharge so they can recover this sludge from several metres below and deliver the same 30+ metres vertical. Tough vacuum loading solids pumps combined with 30 years as the original Solids Pump OEM behind us.

With our vacuum loading solids pumps we can vacuum and pump what many consider impossible, with little or no wear, talk to us TODAY and save yourself some sweat, time and money.

Fitted to either the SV20 or SV70, the Vac-Head tool allows the operator of our vacuum loading solids pumps to quickly recover and transfer drill mud from the rig floor or wet cement from concrete cutting. Vac-Heads expedite the capture oil spills, fire fighting foam and even flood debris - request a video today.

Servicing the global mining & O&G sectors, the work and locations are tough on people and equipment, and that"s where Solidsvac vacuum loading solids pumps excel. From the US to Brazil and Port Harcourt to Oman, Solidsvac pumps are there, pumping the toughest sludges and slurries.

Since 1990 we have been involved in the design, manufacture, rental and use of vacuum loading solids pumps. Over those thirty years, we have manufactured both fixed and mobile units which are employed in a vast range of applications throughout the world. From STP operations in India to drilling in Russia and from mining in Chile to construction in the Netherlands, our 100% Australian designed, developed and air operated pumps provide fast and efficient material handling solutions, around the globe.

From designing the old SV60"s and SV400"s to the ALL NEW SV20-SP the toughest, lightest and lowest cost vacuum loading solids pump in the world. The team at Solidsvac also produce the world"s only CONTINUOUS FLOW, VACUUM LOADING SOLIDS PUMPS, the SV140, SV150 & 440-CVCD.

Our Strainer Trainer, and Float Free Level Switches help keep pumps pumping longer, extending life and saving money, we are the VACUUM LOADING SOLIDS PUMP industry leaders with good reason.

Whilst we are 110% confident in the quality of our vacuum loading solids pump, we like to look at your application in person, and even when we deliver a Solidsvac we stay in touch and provide any future upgrades. We also provide training and and yes, we carry out site visits from Mooranbah to Minnesota and Stavanger to Singapore.ISO9001 Certified and an Achilles Approved Supplier.

These vacuum loading solids pumps can move almost anything and with no internals, there is no cavitation, no heat, no priming and they can"t be damaged by dry running. Solidsvac pumps are tough, no nonsense vacuum loading solids pumps.

The SV Strainer Trainer is designed to keep pump pick-up"s and strainers free from clogging with a 2 second flush of the strainer with either air or water every 120-180 seconds.

Solidsvac not only supply industry leading vacuum loading slurry pumps, we also supply a range of accessories to suit your application. Here we have our broad sweep Vacuum Head attachment, suited for rig floor spill control and industrial clean up"s.

The Solidsvac SV140-VPD is a continuous vacuum loading solids pump with the additional benefit of Variable Pressure Discharge. Available in both 100CFM and 200CFM versions, these LOW ENERGY units feature no internal moving parts, no shearing action are ideal as centrifuge feed pumps.

The Solidsvac AIR FOX Bore Hole pump is a 100% pneumatic, gravity filled with no internal moving parts the AIR FOX is ideal for low flow sump applications. Weighing 15Kg (33 LB) and featuring a 25mm (1") Discharge and using only 10CFM on Discharge will at 100Psi deliver a 30 Metre vertical head.

Solidsvac STRAINER TRAINER provides the pump pick-up with a 2 second purge of either air or liquid every 3 minutes of operation. The purge ensures the suction point remains clear and prevents dry running or partial loading.

The SV-Surface Skimmer facilitates the capture of materials such as oil, organic residues, debris and litter floating on a liquid surface. The unit requires only suction as the motive force . FEATURES: 316 Stainless Steel construction

SVLS Pneumatic Pump Controllers reduce unnecessary pump operation thus reducing air consumption and pump wear. FEATURES: Float Free level sensor. Manual override switch Two flow ranges available LS-15 (159 CFM) & LS-25 (415 CFM)