mud pump crosshead pricelist

The Mud pump crosshead is the critical part on the power end of the mud pump. It slides in the upper and lower guide plates, motivating the intermediate draw bar to deliver driving force to the hydraulic end. One of its ends fixes the intermediate draw bar. The cavity connects the small end of the connecting rod through cross head pin.

The material of the mud pump crosshead is nodular cast iron with the strength of extension of more than 600MPa, which ensures high intensity and abrasive resistance.

If you"re looking for good mud pump bearing sourcing solutions, Alibaba is the perfect place for you. Explore this assortment of mud pump bearing from popular international wholesalers. Find amazing discounts and bargain sales as well as lots of shipping options to maximize your purchase. Whatever you"re looking for, you"re likely to find it here.

Get your next order of mud pump bearing here. Just type and search the products you need and compare through a large array of products and sellers. Buy a new deep groove bearing, a single row deep groove ball bearing, a double row deep groove ball bearing, a radial deep groove ball bearing, an axial deep groove ball bearing, or a deep groove ball bearing puller. Find specific measurements like a 20x42x12mm bearing or 10x26x8mm bearings. Suitable for industrial and automotive usages and transmissions, these mud pump bearing have been made of sturdy and resistant materials so they can perform at their best for a long time. Just look at the pictures and product descriptions to see their quality! They probably won"t disappoint you. Moreover, with all the discounts and shipping options available, you"ll be able to get a great product at a budget-friendly price right at your door. Just a few clicks and you"ll get mud pump bearing shipped to you internationally.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

Ideco is one of the parts of a mud pump that is complete with high quality parts. This is a name that is a leading manufacturer of high quality parts of the fluid end such as the following:Modules

The Ideco pumps allow an addition in the quality trading of the replacements parts of the mud pumps and their parts that also take into account the following varieties such as:Centrifugal pumps

All of the above mentioned ingredients are found in the market and are available for better oil drilling and extraction. There are more than 1000000 varieties of inter changeable mud pump constituents and all the previously mentioned types like centrifugal pumps, parts of a rig and swivel components for the majority of the manufacturers and this includes Ideco. Their components include:Duplex pump spares

Parts of Ideco are provided with a full series of pistons for the triplex as well as duplex mud pumps. This is done for ensuring their popularity among the customers. All the manufacturers of the mud pumps and their parts make sure or try to make sure that their products and constituents are made under the certification of the American Petroleum Institute, the API. Some of them include:Bonded rubber pistons

The Bonded premium urethane piston is a single piece bonded constructed piston that does not have any joints which guarantees the prevention of leaking. The Ideco components like these eliminate the possibility of the abrasive fluids to accumulate between the liner and the piston. The expanded lip of the fluid is not damaged by faster strokes of the pump or high pressure actions. It is a fail proof piston that seals off to increased diameters as the liner keep wearing.

Parts of the mud pump like the pistons with replacement rubbers are currently running for drilling mud in the highest of pressures. It has a bonded construction as well as build without using leakage and joints. The longer size of the piston helps in guaranteeing the longevity of the equipment. The Ideco component helps the piston to function in higher pressure for ensuring a faster stroke. It is additionally resistant to the mud of the oil base as well as other additives that are put to use.

Pistons with replacement rubbers are actually the premium Ideco pistons or mud pump parts that have been serving the industry for a number of years with excellent and unparalleled performance records to suit extreme drilling conditions. This is a single piece bonded unit that has a number of benefits as it is impermeable to different kinds of chemicals as well as other kinds of oil.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

As the name suggests, the mud pump is a device used to transport mud-like liquids with high consistency or more particles. The pump is an important part of mechanical equipment and a machine that converts mechanical energy into liquid pressure energy. Now it has been widely used in drilling, construction sites, enterprise production, mud pond pumping, etc. And now it is used in daily production. Only being familiar with the working principle of the pump can help the operator to use the pump more skillfully and make it play an effective role in industrial production. The following is a detailed description of the working principle and application of the mud pump.

Commonly used mud pumps are piston or plunger type. The crankshaft of the pump is driven by the power machine to rotate, and the crankshaft drives the piston or plunger to reciprocate in the pump cylinder through the crosshead. Under the alternate action of suction and discharge valves, the purpose of pressure feeding and circulating flushing fluid is realized.

According to the function, the mud pump can also be divided into two types: single-acting and double-acting. The single-acting type only completes one suction and drainage action in one cycle of the reciprocating motion of the piston. The double-acting mud pump completes two suction and drainage actions every time it reciprocates. If classified according to the number of cylinders of the pump, there are three types: single cylinder, double cylinder and triple cylinder.

Its working principle is to rely on the reciprocating motion of the piston to make the working volume of the pump chamber change periodically, and then suck in and discharge liquid. It is composed of pump cylinder, piston, water inlet and outlet valves, water inlet and outlet pipes, connecting rod and transmission device, and is more suitable for drilling operations with high pressure and small flow.

The plunger pump is one of the important devices of the hydraulic system. The pressure of the pump depends on the depth of the borehole, the resistance of the channel through which the flushing fluid passes, and the nature of the flushing fluid delivered. The deeper the hole, the greater the resistance of the pipeline and the higher the pressure required. As the diameter and depth of the borehole change, the displacement of the pump is required to be adjusted at any time.

A gearbox is installed in the pump mechanism or its speed is adjusted by a hydraulic motor to achieve the purpose of changing the displacement. In order to accurately grasp the change of the pressure and displacement of the pump, a flow meter and a pressure gauge should be installed on the mud pump to let the drilling personnel understand the operation of the pump at any time, and at the same time judge whether the condition in the hole is normal through the pressure change to prevent accidents in the hole.

The two main parameters of mud pump performance are displacement and pressure. Displacement is calculated by several liters per minute, which is related to the diameter of the borehole and the return speed of the required flushing fluid and the bottom of the hole, that is to say, the larger the diameter of the hole, the greater the required displacement. The upward return speed of the flushing fluid is required to be able to flush the rock cuttings and rock dust cut off by the drill bit away from the bottom of the hole in time and reliably carry them to the surface. During geological core drilling, the upward and downward speed is generally about 0.4 to 1.0 m/min.

A mud pump is a machine that delivers flushing fluid such as mud or water to the borehole during oil drilling. It is an important part of drilling equipment. In the process of oil drilling, the mud pump injects mud into the downhole with the drilling of the drill bit. During this process, the mud pump can cool the drill bit, clean the drilling tool, and some wastes such as cuttings are brought back to the ground to clean the well.

In the commonly used positive circulation drilling, the surface flushing medium, clear water, mud or polymer flushing fluid, is passed through the high-pressure hose, faucet and the center hole of the drill string to the bottom of the drill bit under a certain pressure to cool the drill bit to achieve the purpose of removing and transporting the cuttings to the surface.

During the drilling process, the drill bit continuously breaks the rock at the bottom of the hole to generate cuttings and circulate the mud flushing fluid, transport the debris to the ground and keep the bottom of the hole clean, which is beneficial for the drill bit to continue to break the rock. In addition to this, mud pumps also provide energy for drilling tools, delivering energy to power augers, hydraulic hammers and other hydraulic percussion drilling tools.

In some special work, such as plugging and sealing holes, the mud pump can be used to pour special substances one by one into the grout or other blocking substances in the holes. Oil drilling generally adopts positive circulation drilling. Under a certain pressure, the mud pump passes through water, high-pressure hose and the center hole of the drill string, and the clean water, mud or polymer is transported to the bottom of the well.

Slurry pumps are used to transport abrasive slurry containing solid particles in mining, metallurgy, coal and other industries. It is a coaxial pump with a water pump and a motor. During operation, the motor shaft drives the impeller of the pump to rotate, and transmits energy to the slurry medium to generate a certain flow, drive the solid flow, and realize slurry transportation.

The mud pump is an important process equipment for drilling operations. Whether the drilling project can be completed safely, on time and efficiently, its regular maintenance and maintenance cannot be underestimated. Correct and timely maintenance of the drilling pump is a necessary measure to ensure the normal operation of the mud pump and prolong its service life. Any pump use should pay attention to this link.

When the oil level is stable, check the oil level at the power supply at least once a day. If using a chain drive, check the oil level in the chain case. Observe the working condition of cylinder liner and piston. It is normal for a small amount of mud to flow from the piston pull rope.

Check the cylinder bore of the frame. If there is a large buildup of mud and oil, it should be cleaned up. Check the water tank of the spray pump. If the water is insufficient, it should be replenished. If the water quality is polluted, it should be replaced and the water tank should be cleaned at the same time.

Check the valve cover seal and cylinder liner seal (including the seal between the wear plate and the liquid cylinder) alarm holes frequently. If the mud is discharged, replace the corresponding sealing ring in time.

? Its compact structure, lighter weight, and small size with high efficiency can be matched with kinds of pump devices according to drilling rig’s requirement and different conditions.

? Its durable fluid end has greatly improved triplex pump’s function and capacity, what’s more, its independent design is easy to inspect and convenient to maintenances.

These workhorses keep the mud flowing and your rig running. If theyʼre not working, youʼre not working. We make everything from the crankshaft to the liner seal to the skid. Each one is precision engineered for your rig so you can get back to turning.

We insist over the principle of development of "High top quality, Performance, Sincerity and Down-to-earth working approach" to supply you with exceptional services of processing for Crosshead For Mud Pump, Air Throttle Valve, Hot Water Ball Valve, Metal Spring,Hino Piston Ring. We guaranteed quality, if customers were not satisfied with the products" quality, you can return within 7days with their original states. The product will supply to all over the world, such as Europe, America, Australia,United Kingdom, Slovakia,Serbia, Portugal.We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!