mud pump discharge strainer brands

A wide variety of mud pump discharge strainer options are available to you, such as 1 year, not available.You can also choose from new, mud pump discharge strainer,as well as from energy & mining, construction works , and building material shops mud pump discharge strainer,and whether mud pump discharge strainer is 1.5 years, or unavailable.

We offer pump strainers that are great at preventing large particles of sediment, sewage, mud, or solids from entering the suction port of drainage pumps. These strainers are great for use in swimming pools, pit blinds, or any other situation where you are pumping out water that is not clean. we offer 2 inch, 3 inch, and 4 inch strainers to fit all of the different size pumps. These strainers go great with our Koshin pumps. If you have any questions regarding strainers feel free to call us at 800-488-9146 or email us at orders@frankwall.com.

The NOV 12-P-160 Mud Pumps includes (3) Three New National 12-P-160 Triplex Mud Pumps 1600 HP, 7-1/4″ bore x 12″ stroke, single acting. 5000 PSI fluid ends. 1600 HP Bare Mud Pumps are currently configured for Offshore Service. The NOV 12-P-160 Mud Pumps are located in Houston and ready to be unitized for service.

Forged Steel crankshaft, Individual forged steel two piece interchangeable standard modules, 6-1/2” mission fluid king liners, Standard polyurethane valves and seats, Two piece fast change piston rods, Supreme pistons, Metal to metal liner retention, Clamp type liner and piston rod connections, Fast change valve covers standard, Piston liner lubricant spray system, Liner spray pump, Power end lube system with filter. Mounted on Integral two runner skid, Suction Manifold with vertical suction stabilizer, Suction line pressure relief valve, set for 70 PSI

Includes: motor supports, motor frame, tensioning screws, 2 V-belt guards, 2 pump Sheaves, 2 motor sheaves, banded V-belts, Holes to be drilled to accept EDM D79 Or GE-752 Traction Motors

Flange-blind, National, #5912392, for Strainer cleanout, 5-1/8”, 5000PSI, API 6BX blind flange, BX-169, API 60K Material, 4130 steel, PSL-1, T/C-U, M/C-DD

National Oilwell Varco (NOV) is an American multinational corporation based in Houston, Texas. It is a leading worldwide provider of equipment and components used in oil and gas drilling and production operations, oilfield services, and supply chain integration services to the upstream oil and gas industry. The company conducts operations in more than 600 locations across six continents, operating through three reporting segments: Rig Technologies, Wellbore Technologies, and Completion & Production Solutions. National Oilwell’s two main predecessors, Oilwell Supply and National Supply, were founded in 1862 and 1893, respectively. These two companies manufactured and distributed pumps and derricks.

For the successful execution of your projects, it is important to find an appropriate company with a good track record. We help you in connecting with the top mud pump manufacturers and companies and get the best quotation.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

Yes. We help you find the best mud pumps irrespective of your location. We simplify your search by connecting you with top mud pump manufacturers and mud pump companies in your location, according to your budget and business requirement.

The most widely used mud pumps across the industry are Triplex Reciprocating Pumps. Their application has gained immense popularity with time because they are 30% lighter than duplex reciprocating pumps with relatively less operational cost. Moreover, through these pumps the discharge of mud is smooth and they are capable of moving large volume of mud at higher pressure.

The different parts of a mud pump are Housing itself, Liner with packing, Cover plus packing, Piston and piston rod, Suction valve and discharge valve with their seats, Stuffing box (only in double-acting pumps), Gland (only in double-acting pumps), and Pulsation dampener. A mud pump also includes mud pump liner, mud pump piston, modules, hydraulic seat pullers along with other parts.

The wearing parts of a mud pump should be checked frequently for repairing needs or replacement. The wearing parts include pump casing, bearings, impeller, piston, liner, etc. Advanced anti-wear measures should be taken up to enhance the service life of the wearing parts. This can effectively bring down the project costs and improve production efficiency.

We have a complete industrial chain, which can guarantee sufficient and stable output of the Stem guided valve, Full Open Valve Seat, bi metal lner.We have established a comprehensive pre-sales and after-sales service standards for our Discharge Strainer Cross. Our company"s "careful, attentive, quality is always satisfactory" is the spirit of our company, which is reflected in the pace of our company"s sustainable progress and in the relationship with customers, partners, internal staff and competitors. In order to remain invincible in the market competition, our company has established brand awareness and broken the monopoly. The company"s products and reputation are the symbol of the company, embodying the spirit of the company and the connotation of the company"s culture, and directly affect the customer"s purchase experience. We insist on continuous innovation around customer needs, continue to provide excellent products and services, and create value for customers. We persist in openness, tolerance, sincere cooperation, mutual benefit and harmony.

WebDec 13, 2022 · NATIONAL 12P-160 TRIPLEX MUD PUMP (Ref#5586T) 3 available in India. 1600 HP, rated pump speed 140 strokes per minute, maximum fluid cylinder liner bore 6¾”, stroke 10", 10,000 PSI...

WebMay 27, 2016 · What r the advantages and disadvantages of strainer at pump discharge vs at suction. We have a double diaphragm pump. Application is slurry service with very low flow rate 3 to 7 kg...

WebCompletely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation...

WebWhat Is A Pipe Strainer? A pipe strainer is a device that serves as a means to remove solids from a flow of the fluid mechanically. This is achieved by using a straining element of perforated...

WebSpecial Discharge Strainer Design. Featured here is a specially designed 3-inch 316. Stainless Steel Spool Type Strainer. This flow-through style. Strainer was custom engineered with a 316SS...

WebDec 03, 2014 · NEW 20 GALLON K-20 STYLE DISCHARGE PULSATION DAMPENER 5000 PSI RATED, KIT INCLUDES BLADDER, API RING GASKET, CHARGING KIT, STUDS AND NUTS FOR MOUNTING 5...

Nowadays, we have been seeking our best to become certainly one of the most effective exporters in our discipline to meet shoppers more require for Piston Rod and Pony Rod, Module Accessories, Mud Pump Expendables, Stuffing Box and Oil Seal. We"re professional Discharge Strainer Cross manufacturers and suppliers in China, specialized in providing high quality products and service. We warmly welcome you to buy high-grade Discharge Strainer Cross at competitive price from our factory.

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

FET manufactures a full range of valves and seats for every drilling and well-servicing application as part of our full line of Osprey® mud pump system solutions. All of our valves and seats can be used in water, water base, oil base and synthetic base mud applications. FET offers additional valves and seats not listed below, including drilling valves, frac valves and well service valves. FET’s QC standards for the dimensional and material specs are extremely rigid in comparison to other manufacturers. Contact your FET representative to learn more.

Kingwell are able to supply discharge strainer assy- the output end of the mud pump final pressure medium, whose hosing is of high corrosion resistance, wide range of heat-resistant and high intensity.

1). Technical Support and Production Ability: Although we are one relatively new company, but we have the most professional engineers with tens of years experience in mud pump. And we have hundreds of highly skilled workers working on the pump parts and pump assembling with numerous advanced machines. Our production ability has been siteaudited by supervising inspectorate like France BV (Bureau Veritas), DNV(Det Norske Veritas) and SGS-CSTC(Standards Technical Services Co., Ltd.)

2). Quality Assurance: Ten professional inspectors performstrict quality inspection from the initial forgings, castings, other rawmaterials, each finished machined parts until the final assembling of the pump. Each part assembled on the pump will be well tested and highly qualified. Andfor each pump finished, it will be running tested in our test center for atleast 4 hours. Quality certificate, Inspection report and testing report will beattached when pump is delivered. 12 Months quality guarantee will be offered for each pump.

3). Competitive Price: We are one of the top pump manufacturers in China. We have the greatest advantages in price. We can not offer you the lowest price in China, but most competitive price but with very good quality.

4). Quick Delivery: Usually we will keep some pump model in stock so that we can make fast delivery for clients with urgent need. For pump we do not have in stock, we can also deliver with 40 days.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

Parker"s HGP Profile delivers over three times the life for suction and discharge seals in multi-plex frac pump applications over traditional HNBR D-rings. Owing to its patent pending geometry and proprietary materials of construction, the HGP Profile can withstand pressure up to 10,000 psi at 3 hertz in abrasive, acidic fracturing fluid.