mud pump manifold quotation

High quality, reliable manifold assemblies for standpipe, mud pump discharge, choke, cement and fracking applications. All customized to customer specifications and designed to meet API 6A and ASME B31.3 specs.

An assembly of valves that allows the driller to direct the drilling fluid coming back from the well bore. If the return fluid is under pressure, the choke manifold assembly will release that pressure at a controlled rate. The driller can then redirect the drilling fluid to a gas separator, a flare, or to holding tanks.

Allows the driller to assemble cement pumps and connect them to the steel casing in the drill hole so the cementing process can be completed. Drill hole casings must be cemented into the well bore to seal all formations across the hold bore section

Explore a wide variety of mud pump suction manifold on Alibaba.com and enjoy exquisite deals. The machines help maintain drilling mud circulation throughout the project. There are many models and brands available, each with outstanding value. These mud pump suction manifold are efficient, durable, and completely waterproof. They are designed to lift water and mud with efficiency without using much energy or taking a lot of space.

The primary advantage of these mud pump suction manifold is that they can raise water from greater depths. With the fast-changing technology, purchase machines that come with the best technology for optimum results. They should be well adapted to the overall configuration of the installation to perform various operations. Hence, quality products are needed for more efficiency and enjoyment of the machines" full life expectancy.

Alibaba.com offers a wide selection of products with innovative features. The products are designed for a wide range of flow rates that differ by brand. They provide cost-effective options catering to different consumer needs. When choosing the right mud pump suction manifold for the drilling project, consider factors such as size, shape, and machine cost. More powerful tools are needed when dealing with large projects such as agriculture or irrigation.

Alibaba.com provides a wide range of mud pump suction manifold to suit different tastes and budgets. The site has a large assortment of products from major suppliers on the market. The products are made of durable materials to avoid corrosion and premature wear during operations. The range of products and brands on the site assures quality and good value for money.

Manifolds are designed and manufactured to customer requirements and are fully certified in accordance with the recognized oilfield equipment standards.

The NOV 12-P-160 Mud Pumps includes (3) Three New National 12-P-160 Triplex Mud Pumps 1600 HP, 7-1/4″ bore x 12″ stroke, single acting. 5000 PSI fluid ends. 1600 HP Bare Mud Pumps are currently configured for Offshore Service. The NOV 12-P-160 Mud Pumps are located in Houston and ready to be unitized for service.

Forged Steel crankshaft, Individual forged steel two piece interchangeable standard modules, 6-1/2” mission fluid king liners, Standard polyurethane valves and seats, Two piece fast change piston rods, Supreme pistons, Metal to metal liner retention, Clamp type liner and piston rod connections, Fast change valve covers standard, Piston liner lubricant spray system, Liner spray pump, Power end lube system with filter. Mounted on Integral two runner skid, Suction Manifold with vertical suction stabilizer, Suction line pressure relief valve, set for 70 PSI

Includes: motor supports, motor frame, tensioning screws, 2 V-belt guards, 2 pump Sheaves, 2 motor sheaves, banded V-belts, Holes to be drilled to accept EDM D79 Or GE-752 Traction Motors

National Oilwell Varco (NOV) is an American multinational corporation based in Houston, Texas. It is a leading worldwide provider of equipment and components used in oil and gas drilling and production operations, oilfield services, and supply chain integration services to the upstream oil and gas industry. The company conducts operations in more than 600 locations across six continents, operating through three reporting segments: Rig Technologies, Wellbore Technologies, and Completion & Production Solutions. National Oilwell’s two main predecessors, Oilwell Supply and National Supply, were founded in 1862 and 1893, respectively. These two companies manufactured and distributed pumps and derricks.

The choke and kill manifold is a necessary device for successful control on well kick and implementation of oil and gas well pressure control technologies. It is designed, manufactured and inspected in accordance with 16C.

Choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges and other components. It is adopted to execute new drilling-well’s technique of balance pressure, which can avoid pollution of oil-layer, improve the speed of drilling and control blowout effectively. One end of the device connects with the side flange of BOP spool. When BOP closes, it can control the finite pressure from casing by adjusting the choke valve’s opening, so balanced drilling can work under minimum pressure-difference.

Kill manifold consists of check valves, gate valves, line pipes, pressure gauges. In case of increase in well head pressure, the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, by using blow down lines connected to the kill manifold, the increasing well head pressure also can be released directly for bottom hole pressure release. or water and extinguishing agent can be injected into the well by means of kill manifold.

A Mud Pump may have many changeable parts, such as liner, piston, extension rod, pulsation dampener, valve, clamp, etc. Lake Petro could provide 100% interchangeable parts of many common brands of pump. We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials. Piston assembly is the important spare parts and expendable parts of oil drilling mud pumps. Mud pump valve assy include valve body, valve seat, valve insert (valve rubber ). Pulsation Dampener is usually installed on the discharge line to reduce the fluctuation of pressure and displacement of the drilling mud pump. Fluid End Module is an important component of the hydraulic pump end of the mud pump.

Manufactured to withstand the toughest drilling and environmental conditions, our K-Series triplex mud pumps are ideal for all drilling applications. This legacy product features a balanced forged-steel crankshaft and Southwest Oilfield Products ‘L” Shaped modules which is essential to minimize wear, noise, and operating vibrations. These attributes are essential when drilling deeper high pressure formations, long laterals and when handling corrosive or abrasive fluids and slurries.

Every American Block triplex mud pump is manufactured and fully load tested before leaving our manufacturing campus, and is available in sizes ranging from 800 HP to 2200 HP. The American Block K1600 HP Mud Pump is also available in a 2000 HP up-grade version, when more HP is needed in the same 1600 HP footprint.

The choke and manifold is a necessary device for successful control of good kicks and implementation of oil and gas well pressure control technologies. It is designed, manufactured, and inspected in accordance with API Spec.16C.

The choke manifold consists of choke valves, gate valves, line pipes, fittings, pressure gauges, and other components. It is adopted to execute a new drilling well’s technique of balance pressure, which can avoid pollution of the oil layer, improve the speed of drilling, and control blowout effectively. One end of the device connects with the side flange of the BOP spool. When BOP closes, it can control the finite pressure from the casing by adjusting the choke valve’s opening, so balanced drilling can work under minimum pressure difference.

Kill manifold consists of check valves, gate valves, line pipes, and pressure gauges. In case of an increase in wellhead pressure, the kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, by using blow-down lines connected to the kill manifold, the increasing wellhead pressure also can be released directly for bottom hole pressure release. or water and extinguishing agents can be injected into the well by means of a kill manifold.

We manufactures mud gate valves to meet the tough demands of deep, high-pressure drilling applications up to 7,500 pounds per square inch (psi). Designed to provide long service in high-pressure, pump and standpipe manifold systems, our rugged valves created tight shutoff at every closing cycle and outperform even after long exposure to abrasion and scoring. All of our mud line gate valves comply with American Petroleum Institute flange dimensions and pressure ratings.

Offering you a complete choice of products which include Choke And Kill Manifold, Stand Pipe Manifold With H Manifold, Cement Manifold, Manually Actuated Drilling Chokes, Hydraulically Actuated Drilling Chokes and Diverter System.

JVS standpipe manifolds are designed and manufactured to suit customer requirements and are available in working pressure up to 7500 psi. Construction is available in weld end, flange end, hub end or hammer union type. The manifold comprises of mud gate valves, forged manifold fittings, bleed off choke, pressure sensors and local pressure gauges. We use mud gate valves from Demco® or Anson® as standard.

JVS has an in-house team to carry out onsite welding, PWHT, X-ray, pressure testing and inspection for offshore and onshore installation. This facilitates the installation of the manifold and all associated high pressure piping starting from the mud pump room up to the manifold, providing complete system installation capability.

JVS designs & manufactures manually actuated drilling chokes in accordance with API 16C. Manually actuated drilling chokes used in choke & kill manifold. Standard sizes available 3 1/8", 3-1/16" and 4-1/16" with working pressures of 5000 psi, 10000 psi and 15000 psi having orifice size 2". Other sizes available upon request. All parts are suitable for H2S service and temperature rating L to X (-50 °F to 350 °F).

JVS is one of the pioneer organisation for design, engineer, supply, installation and commissioning of high pressure well control pipe network from mud pump room to gooseneck. JVS has trained manpower, service engineer, welder, fitters and NDT technician to carry out work at offshore / on shore rigs. JVS approach for standpipe mud line system Understand and review of customer requirements

An enlarged pipe at the top of a casing string that serves as a funnel to guide drilling tools into the top of a well. The bell nipple is usually fitted with a side outlet to permit drilling fluids to flow back to the surface mud treating equipment through another inclined pipe called a flow line.

Crown Oilfield Instrumentation offers Standpipe Pressure Gauges & Unitized Pressure Gauges (UMG) that come standard with a 2″ male NPT, 2” 1502 hammer union type, flanged type and threaded. These mud pump pressure gauges (also known as Standpipe Manifold Gauges) are easily view-able at distances and provide the same reliability as our standard6” gauges. Just like reading a large clock at a distance, Crown UMGs offer provide an easy-to-view, full-faced, liquid-filled dial, unlike a Type F or D that only has a half-moon shaped dial. With built in dampener assembly and blow-out plug safety feature, these gauges stand up to over-pressure situations, kicks, and rig vibrations.  This style of gauge is ideal for mud pumps, stand pipes, choke manifolds and pump trucks and can be used in cementing, fracturing, and acidizing gravel-packing trucks, blowout preventers, and mud pump pressure gauge applications.

Since the NOV A1700-PT Triplex Mud Pump was built approximately 60 years ago, the industry has widely accepted the three cylinder or triplex style pump. Triplex mud pumps are manufactured worldwide, and many companies have emulated the original design and developed an improved form of the triplex pump in the past decade.

NOV A1700-PT Triplex Mud Pumps have many advantages they weight 30% less than a duplex of equal horsepower or kilowatts. The lighter weight parts are easier to handle and therefore easier to maintain. The other advantages include;They cost less to operate

One of the more important advantages of triplex over duplex pumps, is that they can move large volumes of mud at the higher pressure is required for modern deep hole drilling.

NOV A1700-PT Triplex Mud Pump is gradually phasing out duplex units. In a triplex pump, the pistons discharge mud only when they move forward in the liner. Then, when they moved back they draw in mud on the same side of the piston. Because of this, they are also called “single acting.” Single acting triplex pumps, pump mud at a relatively high speeds. NOV A1700-PT Triplex Mud Pump has three pistons each moving in its own liner. It also has three intake valves and three discharge valves. It also has a pulsation dampener in the discharge line.

• Equipment – The 6 x 8 centrifugal pump is powered by a new John Deere 4.5 liter electric engine. It is also equipped with a 6” hopper, 3 mud guns, hydraulic shale shaker, and all necessary internal piping and manifolds