mud pump wear plate in stock

A wide variety of mud pump wear plate options are available to you, such as 1 year, not available.You can also choose from new, mud pump wear plate,as well as from energy & mining, construction works , and machinery repair shops mud pump wear plate, and whether mud pump wear plate is 1.5 years, 6 months, or unavailable.

Wear plate is the main component of hydraulic power end in drilling mud pump. It is forged of 35CrMo alloy steel.The wear-resistant disc produced by our company has high hardness and nickel plating, which has good wear resistance and corrosion resistance.

Product&Reapir: Crown block(TC225 TC250 TC315 TC450 TC585), Travelling block(YC225 YC250 YC315 YC350 YC450 YC450S YC585), Hook(DG225 DG250 DG315 DG350 DG450 DG585 DG675), Rotary table(ZP175 ZP205 ZP275 ZP375 ZP975AS ZP495), Swivel(SL225 SL250 SL450 SL585), Drawworks(JC20 JC30 JC40 JC50 JC70B JC90DB), Mud pump (F-500 F-800 F-1000 F-1300 F-1600 F-1600HL F-2200 F-2200HL 3NB500C,3NB1000C 3NB1300C 3NB1600 SL3NB-1000 SL3NB-1300A SL3NB-1600A),BOP(FH,FZ,Cameron,Shaffer), Control System for Surface Mounted BOP Stacks(FKQ,FKDQ),Disc brake (PS,PSZ, DBS), Bladder accumulator (NXQ), Drilling rig(ZJ40/2250DZ ZJ50/3150DZ ZJ70/4500DZ ZJ90/6750DZ), Workover rig (XJ40,XJ60, XJ80,XJ100,XJ12,ZJ15,ZJ20,ZJ3,XJ350, XJ450, XJ550,XJ650,XJ750), BPM Top drive((DQ120BSC, DQ90BSD, DQ90BSC, DQ80BSC, DQ70BSD, DQ70BSE, DQ70BSC, DQ50BC, DQ40BC, DQ40BSG, DQ40BCQ, DQ40YR, DQ30Y) Make: Bomco, Lanzhou LS,LSPE, SJ Petro, RG Petro, Sichuan Honghua, CPTDC, Beijing BPM, Shanghai Shenkai, Kingdream, CCDC, SJS Serva, DFXK, LS-NOV, Beijing PSK, Gold basin, Renqiu Boke,Guangdong Dongsu.(Guangshi), XBSY.,Tiehu, Rongsheng (HBRS), TSC. Replacements:Mission magnum/Halco centrifugal pump, Cameron FC gate valve,Cameron R check valve, Demco mud valveE( 3K&5K ), Demco butterfly valve,BJ varco handling tools (SDXL, SDML, SDS,DCS,SSC,SSD,YT, HYC, LYT, MP,MYT, MG, RGG, HGG, MGG, TA, SJ), MI SWACO / Mongoose / Derrick / /Brandt / King cobra shale shaker screen (FLC2000,FLC503,Derrick 626), M/D & OTECO Gauge(Type F,Type D,Model 6,Model 7,Model 8), Twin disc,WPT, Eaton clutch & friction disc, National (10-P-130,12-P-160 ,14-P-220 ,8-P-80 ,9-P-100), Gardner denver (PZ-7,PZ-8,PZ-9,PZ-10,PZ-11), EMSCO FB1600.International Brand: Moog, CCS, ATOS, Rexroth, Eaton, Flowrox, Italvibras, Martin, Norgren, Parker, Siemens, Vickers, 3M.Standard:API Spec 4F, API Spec 6A,API Spec 6D,API Spec 600, API Spec 7K, API Spec 8A, API Spec 8C,API Spec 16A, API Spec 16C, API Spec 16D

For maximum performance and durability, our modules are made from individually forged, heat-treated alloy steel and feature an API 7 valve assembly for improved flow. Our L-shaped design features bore-seal technology for improved seal performance in higher pressures and is compatible with numerous “F-Series” drilling pumps including Honghua®, Bomco® Rongsheng®, Workforce® and other similar designs.

Mud pump wear plate is the main component in the drilling pump fluid end system. It is installed on the inner side of the cylinder and plays the locating role for mud pump cylinder.

It is forged from 35CrMo. The wear-resistant discs manufactured by our company have high hardness and nickel-plated surface, which has good wear resistance and corrosion resistance.

The driving device realizes the valve opening and closing by rotating the valve disc by a certain angle through the valve stem and the rocker arm. The sealing surface of the valve disc is closely fitted to the valve seat by means of a spring. The valve disc is displaced in the vertical direction of the sealing surface. This helps to compensate the deformation of the valve parts caused by thermal expansion and contraction and the slight wear and tear caused by multiple opening and closing, overcomes the impact of any back pressure changes on the seal and prevents particulate media from entering between the sealing surfaces; During the closing process, the difference in friction between the valve seat seal and the valve disc in the tangential direction causes the valve disc to rotate during an opening and closing cycle and can continuously cut and clean. It may accumulate in the valve cavity during the process These characteristics of the medium are not found in other valves.

The sealing surface of the valve seat adopts an open structure. The valve disc will agitate and remove the medium during each action process, avoiding the accumulation of internal materials that often occur in other forms of wear-resistant valves; the changing circulation pipe space makes the flowing materials vortex Generates self-cleaning effect, avoids the corrosion and damage caused by the accumulation of materials inside the valve body, and maintains the valve in a good seal. Compact structure and easy installation

The valve disc and the valve disc are metal-to-metal hard seals. The sealing surface is made of nickel-based and cobalt-based hard alloys as a whole, with high hardness, corrosion resistance, oxidation resistance, high temperature resistance, suitable for corrosion and wear resistance at high temperature Wide temperature range.

UDS International designs and manufactures heavy-duty centrifugal mud pump parts and equipment with innovative designs for optimum output and reliability.

Mud pumps are an important part of your drilling, tunneling and/or mining dynamics, helping to maintain drilling mud circulation through your drilling rig column, which improves the efficiency of drilling operations and reduces wear on your equipment.

UDS effective mud pump parts and equipment have the durability to meet the demands of high pressures, a range of ground conditions and are easy to maintain.