7500 psi mud pump made in china

FET manufactures a full range of valves and seats for every drilling and well-servicing application as part of our full line of Osprey® mud pump system solutions. All of our valves and seats can be used in water, water base, oil base and synthetic base mud applications. FET offers additional valves and seats not listed below, including drilling valves, frac valves and well service valves. FET’s QC standards for the dimensional and material specs are extremely rigid in comparison to other manufacturers. Contact your FET representative to learn more.

JF-1600 TRIPLEX PUMP, 5000PSI S/N:1600 14 043JF-1600 TRIPLEX PUMP, 5000PSI S/N:1600 14 044JF-1600 TRIPLEX PUMP, 5000PSI S/N:1600 14 045PETROLEUM DRILLMarks:

JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

TSC mud pump liners are designed and manufactured to meet or exceed original equipment specification and API standards for almost all types of mud pumps in use today.

TSC Workforce (WF) series mud pumps are developed to offer superior performance for a variety of drilling operations and work environments. TSC Mud pump and parts for model WF1300 triplex Pump,WF1300BH,WF1300,WF-1300C,WF1600A,WF1600B,WF1600BH,WF1600CH,WF1600L,WF1600LH,WF2000,WF2200.WF400,WF700.

A mud pump (sometimes referred to as a mud drilling pump or drilling mud pump), is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi or 52,000 kPa) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling and manufactured according to API specification 7K.

The advantages of the drilling mud pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameter of pump liners and pistons.

As an important equipment for oilfield drilling operation, a drilling mud pump delivers circulating high-pressure drilling fluid or drilling mud to the bottom of the oil well, flushes the bottom of the well, breaks the rock, cools, lubricates and clean the drill bit, and carries the cuttings back to the ground.

The drilling mud is also used to suspend and carry out drill cuttings from the drill bits as it is brought in and out of the hole. This ensures that the drill bit does not clog and overheat, and makes the entire drilling operation smooth and safe.

Rotational power is supplied to the mud pump through an external power source like a diesel engine or electric motor. The power end of the mud pump converts the rotational energy through a crankshaft to a reciprocating motion of pistons.

The pistons move back and forth in mud pump liners, exerting a force on the cylinder chamber. During the retraction of the piston, valves open to allow the fluid to be drawn into the cylinder. Once the piston has fully retracted, it is pushed back into the cylinder.

JF-1600 TRIPLEX PUMP, 5000PSI S/N:1600 14 043JF-1600 TRIPLEX PUMP, 5000PSI S/N:1600 14 044JF-1600 TRIPLEX PUMP, 5000PSI S/N:1600 14 045PETROLEUM DRILLMarks:

JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS JIAOZUO JINBIAO MUD PUMP JIAOZUO JINBIAO ROTARY TABLE JIAOZUO JINBIAO MUD PUMP COMPONENTS

TSC mud pump liners are designed and manufactured to meet or exceed original equipment specification and API standards for almost all types of mud pumps in use today.

TSC Workforce (WF) series mud pumps are developed to offer superior performance for a variety of drilling operations and work environments. TSC Mud pump and parts for model WF1300 triplex Pump,WF1300BH,WF1300,WF-1300C,WF1600A,WF1600B,WF1600BH,WF1600CH,WF1600L,WF1600LH,WF2000,WF2200.WF400,WF700.

The drill mud pump is one of the important pieces of oil drilling equipment and transmits drilling fluid through high pressure manifold of circulating system to the bottom of a well for cooling a drill bit, cleaning the well, crushing rocks, removing cuttings, and balancing the pressure of stratum.

3NB1600H pump has been completely assembled and test operated under pressure before being shipped to the field. The lubricant is drained from the power end and the expendable parts are removed from the fluid end.

Proper pump installation requires some thought and planning before it is brought to the location and the rig-up is made. It is difficult and expensive to correct errors in piping, pulsation dampener mounting, and tie down after they have been fabricated and welded in place. The following outline is intended as a guide when planning your installation and can help avoid unnecessary and expensive corrections.