lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

Suitable for land and offshore drilling applications, the premium Ellis-Williams™ EQ-2200 pump offers the smoothest, quietest operation of any mud pump in the industry. The EQ-2200 quintuplex pump features a smaller footprint and higher maximum flow rates than traditional triplex pump designs in the same horsepower class.

With a five-piston system, the pump reduces mud-telemetry noise and pulsation by 25 to 70%, which gives you fast downhole communication for precise geosteering. The pump also improves flow rates by 40%, which reduces the number of pumps and total power draw at the wellsite.

Premium can supply overhaul and parts compatible with the following Mud Pump makers and trademarks: National Oilwell Varco (NOV), MHWirth, Continental Emsco, Gardner Denver, Lewco, Drillmec, and others. Premium is an independent supplier of drilling equipment parts.

BOMCO/Emsco Mud Pumps:F2200HL, F1600HL, F-1300, F-1600, FB1300, FB1600, F-800, F-1000, F-500, F-350, DB-550, DA-700, FA-1600/1300, FC-2200, D-300/500, D-375, D-700,

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

Closed loop pressurized freshwater liner wash system, complete with integral water cooling tank equipped with centrifugal pump and driven by explosion proof electric motor

Belt drive transmission: two each motor sheaves and QD mounted pump sheaves; banded Kevlar Vbelts; belt guards; for use with AC drive motors c/w 20HP blower assemblies

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

The 2,200-hp mud pump for offshore applications is a single-acting reciprocating triplex mud pump designed for high fluid flow rates, even at low operating speeds, and with a long stroke design. These features reduce the number of load reversals in critical components and increase the life of fluid end parts.

The pump’s critical components are strategically placed to make maintenance and inspection far easier and safer. The two-piece, quick-release piston rod lets you remove the piston without disturbing the liner, minimizing downtime when you’re replacing fluid parts.

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

Lake Petro provides high quality Mud Pump Parts including Mud Pump Liners, Mud Pump Fluid End Module, piston, Valve and Seat etc. With more than 10 years of experience in the oil and gas industry, we are dedicated to help and support our loyal clients with the most cost-effective and quality Liners and Pistons. We also provide mud pump price and mud pump for sale.

We offer Liners with Ceramic (Zirconia and Aluminium oxide) and Steel (Metal and Bi-metal) materials for all common brands of the mud pump and triplex mud pump.

All Lake Petro liner products are interchangeable with O.E.M. products. Meanwhile, we provide customized Liners according to drawings. Our liners, also with our other mud pump spares, are supplied for use in Honghua, F-Series, Bomco, Emsco and National lines of triplex drilling pumps. Let Lake Petro be your one-stop shop for your whole fleet of pumps. Please refer to “Suitable Pump Models” Lable for more details.

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

Drilling consumables such as mud pump systems and their components can drastically increase your uptime while reducing costs and health/safety/environmental (HSE) risks. To support your drilling needs, Forum’s patented P-Quip® mud pump system offers a single-source solution that integrates high-quality fluid end components for maximum longevity and performance.

With more than 20 years of successful operation in severe environments, P-Quip offers a proven track record for the lowest cost of ownership in the industry. As part of our commitment to quality, our mud pump parts use patented Banded Bore™ technology that significantly reduces stress concentrations and leads to longer module life.

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

Cameron manufactures high-performance, robust LEWCO™ mud pumps for onshore and offshore oiland gas drilling applications. Each mud pump features a one-piece, forged and fabricated alloy steelcrankshaft for smooth operation and enhanced longevity. In addition, LEWCO mud pumps includea welded steel power frame, forged alloy steel pinions and gears and triple-redundant power endlubrication. Prior to delivery, LEWCO mud pumps are tested in our quality control facility to verifyperformance expectations.

For maximized drilling performance and efficiency, LEWCO mud pumps offer high discharge flow rates,impressive power-to-weight ratios and small footprints. Cameron can also furnish fluid end modulesto match the customer’s existing inventory. Cameron takes pride in their ability to provide integratedpump packages, including top or rear mount AC or DC electric drives, controls, manifolds, piping andaccessories. Pumps are installed on a heavy-duty skid or trailer mounted for portability.

One-Piece Forged and Fabricated Alloy Steel Crankshaft The power balanced crankshaft reduces noise and vibration and extends the life of the bearing and crankshaft life. Rather than using a multipiece bolted component, the LEWCO crankshaft is made of one-piece, forged and fabricated alloy steel construction. It is repairable to help reduce operating expense and its bearings are lubricated via drilled internal passageways for longevity.

Welded Steel Power Frame The mud pump power frame is engineered for performance, reliability and toughness. Designed for discharge pressures as high as 7500 psi, it is an independent, precision-fabricated structure of double-wall welded steel, with stiffeners and gussets for added strength and durability. As opposed to pumps mounted on an integral skid, LEWCO mud pumps come mounted on a heavy-duty oilfield skid for mobility and increased alignment capability, reducing component wear caused by internal stresses.

Triple-Redundant Power End Lubrication The LEWCO triple-redundant, filtered lubrication system includes internal gravity/splash plus internal/external force-feeding of most of its power end bearings and upper/lower crosshead slides. For protection even at low operating speeds, the system includes a gear-driven mechanical pump off the main gear and a second pump driven by an electric motor.

Fluid End Modules LEWCO fluid end modules are available in one or two-piece configurations using quenched and tempered forged steel material. Cameron can furnish fluid end modules compatible with various mud pump brands already in use, eliminating the need to stock extra spares. Fluid end expendables are off-the-shelf parts, readily available from domestic and international Cameron facilities, further minimizing the need for additional stocking.

Steel Connecting RodsThe LEWCO rolled plate, low-carbon steel connecting rods maintain precisealignment between the crankshaft and crosshead under maximum load. These rodsfeature double-row cylindrical roller bearings in the crosshead end and single rowcylindrical bearings in the crankshaft end, reducing wear and friction under severeoperating conditions.

Discharge Manifold and CrossMade of forged, heat-treated steel for ruggedness, LEWCO discharge manifolds aredesigned to provide reliable connections and easy module maintenance. The piecesare available in working pressures of 3000, 5000 and 7500 psi and in various flangeoutlet configurations with clean-out strainers. On LEWCO pumps, the single-piece,trepanned manifold mounts directly to the front or back of the fluid ends, whicheliminates connections between the discharge modules.

Developed for increased mobility, the WH-Series mud pumps deliver high performance in a compact design. Featuring small footprints and less weight, these pumps are ideal for applications where space is limited. LEWCO mud pumps feature a power balanced, single-piece forged steel crankshaft for smooth operation.

WH-1312 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.43 Rated hp (kW): 1300 (969) @ 130 Spm PUMP SPEED (Spm) 130 110 90 70 50 30 MAXIMUM INPUT HP (kW) rating 1 1300 (969) 1100 (820) 900 (671) 700 (522) 500 (373) 300 (224) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2) per revolution 6-3/4 (171.5) 2766 (194.5) 5.577 (21.108) 725 (2744) 613 (2322) 502 (1900) 390 (1478) 279 (1056) 167 (633) 6-1/2 (165.1) 2983 (209.7) 5.171 (19.574) 672 (2545) 569 (2153) 465 (1762) 362 (1370) 259 (979) 155 (587) 6 (152.4) 3501 (246.1) 4.406 (16.678) 573 (2168) 485 (1835) 397 (1501) 308 (1168) 220 (834) 132 (500) 5-1/2 (139.7) 4166 (292.9) 3.703 (14.014) 481 (1822) 407 (1542) 333 (1261) 259 (981) 185 (701) 111 (420) 5 (127.0) 5000 (351.5) 3.060 (11.582) 398 (1506) 337 (1274) 275 (1042) 214 (811) 153 (579) 92 (347)Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency1

WH-1612 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 1600 (1193) @ 120 Spm PUMP SPEED (Spm) 120 110 100 90 80 70 MAXIMUM INPUT HP (kW) rating 1 1600 (1193) 1467 (1094) 1333 (994) 1200 (895) 1067 (795) 933 (696) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 2987 (210.0) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824) 7 (177.8) 3429 (241.1) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589) 6-1/2 (165.1) 3997 (279.6) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370) 6 (152.4) 4668 (328.2) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168) 5-1/2 (139.7) 5555 (390.6) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981) 5 (127.0) 6722 (472.6) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

WH-2012 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.41 Rated hp (kW): 2000 (1491) @ 140 Spm PUMP SPEED (Spm) 140 130 120 110 100 90 MAXIMUM INPUT HP (kW) rating1 2000 (1491) 1857 (1385) 1714 (1278) 1571 (1172) 1429 (1065) 1286 (959) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 3201 (225.0) 6.885 (26.060) 964 (3649) 895 (3388) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 7 (177.8) 3674 (258.3) 5.998 (22.701) 840 (3178) 780 (2951) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 6-1/2 (165.1) 4261 (299.6) 5.171 (19.574) 724 (2741) 672 (2545) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 6 (152.4) 5001 (351.6) 4.406 (16.678) 617 (2335) 573 (2168) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 5-1/2 (139.7) 5952 (418.5) 3.703 (14.014) 518 (1962) 481 (1822) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 5 (127.0) 7202 (506.3) 3.060 (11.582) 428 (1622) 398 (1506) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 347 (1314) 322 (1220) 297 (1126) 273 (1032) 248 (938) 223 (844)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

LEWCO W-Series mud pumps are built for durability, longevity and are designed with a welded power steel frame that features supplementary steel for operational efficiency. The W-Series line includes robust, high pressure, low maintenance pumps to increase drilling performance. LEWCO mud pumps feature a power balanced, single-piece forged and fabricated alloy steel crankshaft for smooth operation.

W-1712 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 12 (304.8) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 120 Spm PUMP SPEED (Spm) 120 110 100 90 80 70 MAXIMUM INPUT HP (kW) rating1 1700 (1268) 1558 (1162) 1417 (1056) 1275 (951) 1133 (845) 992 (739) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 3174 (223.2) 6.885 (26.060) 826 (3127) 757 (2867) 688 (2606) 620 (2346) 551 (2085) 482 (1824) 7 (177.8) 3644 (256.2) 5.998 (22.701) 720 (2724) 660 (2497) 600 (2270) 540 (2043) 480 (1816) 420 (1589) 6-1/2 (165.1) 4226 (297.1) 5.171 (19.574) 621 (2349) 569 (2153) 517 (1958) 465 (1762) 414 (1566) 362 (1370) 6 (152.4) 4960 (348.7) 4.406 (16.678) 529 (2002) 485 (1835) 441 (1668) 397 (1501) 353 (1334) 308 (1168) 5-1/2 (139.7) 5902 (415.0) 3.703 (14.014) 444 (1682) 407 (1542) 370 (1402) 333 (1261) 296 (1121) 259 (981) 5 (127.0) 7142 (502.1) 3.060 (11.582) 367 (1390) 337 (1274) 306 (1158) 275 (1042) 245 (927) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.479 (9.381) 297 (1126) 273 (1032) 248 (938) 223 (844) 198 (751) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-1714 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 14 (355.6) Gear Ratio: 4.84 Rated hp (kW): 1700 (1268) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating 1 1700 (1268) 1545 (1152) 1391 (1037) 1236 (922) 1082 (807) 927 (691) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 7-1/2 (190.5)4 2968 (208.7) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824) 7 (177.8) 3407 (239.5) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589) 6-1/2 (165.1) 3951 (277.8) 6.033 (22.836) 664 (2512) 603 (2284) 543 (2055) 483 (1827) 422 (1599) 362 (1370) 6 (152.4) 4637 (326.0) 5.141 (19.458) 565 (2141) 514 (1946) 463 (1751) 411 (1557) 360 (1362) 308 (1168) 5-1/2 (139.7) 5519 (388.0) 4.320 (16.350) 475 (1799) 432 (1635) 389 (1472) 346 (1308) 302 (1145) 259 (981) 5 (127.0) 6678 (469.5) 3.570 (13.512) 393 (1486) 357 (1351) 321 (1216) 286 (1081) 250 (946) 214 (811) 4-1/2 (114.3) 7500 (527.3) 2.892 (10.945) 318 (1204) 289 (1095) 260 (985) 231 (876) 202 (766) 174 (657)1 Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Pressures greater than 5000 psi require high-pressure fluid ends4 Liner is induction-hardened, therefore liner life is reducedAll specifications are subject to change. Information important to a particular application should be verified by Cameron.

W-2214 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 14 (355.6) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 2667 (187.5) 11.567 (43.780) 1272 (4816) 1157 (4378) 1041 (3941) 925 (3503) 810 (3065) 694 (2627) 8-1/2 (215.9)3 2990 (210.2) 10.317 (39.051) 1135 (4296) 1032 (3905) 929 (3515) 825 (3124) 722 (2734) 619 (2343) 8 (203.2) 3376 (237.3) 9.139 (34.592) 1005 (3805) 914 (3459) 823 (3114) 731 (2768) 640 (2422) 548 (2076) 7-1/2 (190.5) 3841 (270.0) 8.032 (30.403) 884 (3345) 803 (3041) 723 (2737) 643 (2432) 562 (2128) 482 (1824) 7 (177.8) 4409 (310.0) 6.997 (26.484) 770 (2914) 700 (2649) 630 (2384) 560 (2119) 490 (1854) 420 (1589) 6-1/2 (165.1) 5114 (359.5) 6.033 (22.837) 664 (2513) 603 (2283) 543 (2055) 483 (1828) 422 (1597) 362 (1370) 6 (152.4) 6001 (421.9) 5.141 (19.460) 565 (2139) 514 (1948) 463 (1753) 411 (1556) 360 (1363) 308 (1166) 5-1/2 (139.7) 7142 (502.1) 4.320 (16.353) 475 (1798) 432 (1635) 389 (1472) 346 (1310) 302 (1143) 259 (980) 5 (127.0) 7500 (527.3) 3.570 (13.510) 393 (1487) 357 (1351) 321 (1215) 286 (1083) 250 (946) 214 (810) Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced 1

W-2215 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 15 (381.0) Gear Ratio: 4.82 Rated hp (kW): 2200 (1641) @ 110 Spm PUMP SPEED (Spm) 110 100 90 80 70 60 MAXIMUM INPUT HP (kW) rating 1 2200 (1641) 2000 (1491) 1800 (1342) 1600 (1193) 1400 (1044) 1200 (895) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 2489 (175.0) 12.393 (46.907) 1363 (5160) 1239 (4691) 1115 (4222) 991 (3753) 868 (3284) 744 (2815) 8-1/2 (215.9)3 2791 (196.2) 11.054 (41.840) 1216 (4603) 1105 (4184) 995 (3766) 884 (3348) 774 (2929) 663 (2511) 8 (203.2) 3151 (221.5) 9.792 (37.063) 1077 (4077) 979 (3707) 881 (3336) 783 (2965) 685 (2595) 588 (2224) 7-1/2 (190.5) 3585 (252.0) 8.606 (32.575) 947 (3584) 861 (3258) 775 (2932) 688 (2606) 602 (2280) 516 (1955) 7 (177.8) 4115 (289.3) 7.497 (28.376) 825 (3122) 750 (2838) 675 (2554) 600 (2270) 525 (1986) 450 (1703) 6-1/2 (165.1) 4773 (335.6) 6.464 (24.467) 711 (2692) 646 (2447) 582 (2202) 517 (1958) 452 (1713) 388 (1468) 6 (152.4) 5601 (393.8) 5.508 (20.848) 606 (2293) 551 (2085) 496 (1876) 441 (1668) 386 (1459) 330 (1251) 5-1/2 (139.7) 6666 (468.7) 4.628 (17.518) 509 (1927) 463 (1752) 417 (1577) 370 (1402) 324 (1226) 278 (1051) 5 (127.0) 7500 (527.3) 3.825 (14.478) 421 (1593) 382 (1448) 344 (1303) 306 (1158) 268 (1014) 229 (869) Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced 1

W-3000 Triplex Piston Model – Continuous Duty Performance Data Stroke, in (mm): 16 (406.4) Gear Ratio: 4.36 Rated hp (kW): 3000 (2237) @ 100 Spm PUMP SPEED (Spm) 100 90 80 70 60 50 MAXIMUM INPUT HP (kW) rating1 3000 (2237) 2700 (2013) 2400 (1790) 2100 (1566) 1800 (1342) 1500 (1119) MAX VOLUME/ LINER SIZE DISCHARGE STROKE OUTPUT gal(l)/min2 in (mm) PRESSURE gal (l) psi (kg/cm2)3 per revolution 9 (228.6)3 3501 (246.1) 13.219 (50.035) 1322 (5004) 1190 (4504) 1058 (4003) 925 (3503) 793 (3002) 661 (2502) 8-1/2 (215.9) 3925 (275.9) 11.791 (44.630) 1179 (4463) 1061 (4017) 943 (3571) 825 (3124) 707 (2678) 590 (2232) 8 (203.2) 4431 (311.5) 10.445 (39.533) 1044 (3954) 940 (3558) 836 (3163) 731 (2768) 627 (2372) 522 (1977) 7-1/2 (190.5) 5041 (354.4) 9.180 (34.746) 918 (3475) 826 (3127) 734 (2780) 643 (2432) 551 (2085) 459 (1737) 7 (177.8) 5787 (406.9) 7.997 (30.268) 800 (3027) 720 (2724) 640 (2422) 560 (2119) 480 (1816) 400 (1514) 6-1/2 (165.1) 6712 (471.9) 6.895 (26.098) 690 (2610) 621 (2349) 552 (2088) 483 (1827) 414 (1566) 345 (1305) 6 (152.4) 7500 (527.3) 5.875 (22.238) 588 (2224) 529 (2002) 470 (1779) 411 (1557) 353 (1334) 294 (1112)Based on 90% mechanical efficiency 2Based on 100% volumetric efficiency 3Requires special retention system; liner is induction-hardened, therefore liner life is reduced1

lewco w2215 mud <a href='https://www.ruidapetroleum.com/product/49'>pump</a> price

SINCE 1997, HNA has been an integrated engineering & manufacturing specialist recognized worldwide for its unique World Leading HIGH PRESSURE Technology and high quality products in the O&G industry, by designing and fabricating HNA Duplex, Triplex and Quintuplex pumps, which are 100% interchangeable to most of the global famous brands: Bomco, Honghua, TSC, Weatherford, Ellis Williams, Gardner Denver, Emsco , National, Oilwell, Ideco, Drillmec & other major types of models, and customized design and production available.