lubi mud pump catalogue price

Established in the year 1971 at Ahmedabad (Gujarat, India), we “Paras Engineering Company” are a renowned Authorized Wholesale Dealer of an excellent quality range of Submersible Pump, Monoblock Pump, etc. We are a Sole Proprietorship firm and we source products from the reliable market vendors which can be availed from us at reasonable prices. Under the guidance of our mentor “Mr. Ashish Shah”, who holds profound knowledge and experience in this domain, we have been able to aptly satisfy our clients.

Product data The Lubi LBM series are self-priming, horizontal, single-stage, centrifugal, end-suction pumps. Pumps are available from 0.75 to 2.2 kW in single-phase and from 0.75 to 7.5 kW in three-phase power supply. Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. They are also available as bare pump unit which are suitable for coupling with motor / engine. The pump is fitted with a gland packing and single piece pump-motor shaft (in close coupled version). Mechanical shaft seal is available in 0.75 kW models. The pumps have...

Product data Operating conditions Head range The pump is fitted with a Totally Enclosed Fan Cooled, 2-pole or4-pole induction motors which performance Liquid temperature range: 0°C to +90°C Total suction lift : Up to 8 metres Pumped liquids These pumps are designed for liquids which are non- aggressive and non-explosive, muddy water, with or without solids up to 20 mm grain size or fibres. Pump location The pumps have been designed to operate in a non- aggressive and non-explosive atmosphere. The relative humidity should not exceed 95%. Curve conditions The conditions below apply to the...

Base frames Base frames The dimensional sketches below show the dimensions of the base frames fitted to LBS pumps. The type number of the base frame is stated for each LBS pump mentioned in the Technical data. Base frame type No. Base frame

Lubi Electricals Limited. Near Kalyan Mills, Naroda Road, Ahmedabad-380 025, INDIA. Sales Enquiries: mktsales@lubipumps.com, expsasles@lubipumps.com Product Improvement is a continuous process at "LUBI". The data given in this publication is therefore subject to revision.

Performance Range Flow rate up to 2500 l/min. (150 m3/h) For clean liquids without abrasives, which are non - aggressive for the pump materials. For Irrigation of Fields / Farms. For civil and industrial applications. For fire fighting applications. For heating, cooling, air - conditioning and circulation plants. Special Features on Request Higher liquid or ambient temperatures. Available in mechanical seal. 2 - pole induction motor Three phase : Constructed in accordance with IEC 34. Operating Conditions Total suction lift up to 8mts. NOTE : For Bronze impeller please add a subscript "B" to model no. For Ex. : LBH-18 for Grey Iron impeller, LBH-18B for Bronze impeller.

The pump volute shall be of cast Iron as per grade FG 260 of IS 210/ISO 186 with vertical discharge port. The pumps shall have non clog semi open impeller with material of construction of Cast Iron (standard supply), CF8 and CF8M, suitable for pumping liquids up to 50 deg. C.

The Pump shaft sealing shall be accomplished with double mechanical shaft seal of material Carbon /Ceramic/NBR/AISI 304 Up to 1 Hp and above 1 Hp the mechanical shaft seal material shall be Sic/Sic /Viton /AISI 316 on the pump side.

The pump shall be close coupled with a dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, epoxy sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged application.

Lubi PumpsOffering you a complete choice of products which include end-suction centrifugal monoblock pumps, multi stage multi outlet fire pumps, horizontal split case fire pumpset, hpn pressure booster systems, lcrh series high-pressure vertical multistage centrifugal pumps and lubi long coupled end suction centrifugal pump.

The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), Bronze LTB2, CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, stainless steel shaft sleeve.

The Pump shaft sealing shall be by mechanical shaft seal of Carbon/Ceramic/NBR/AISI 304 construction suitable for 10 bar pressure rating and water temperature from 0 to +90 deg. C.

The pump shall be close coupled with a totally enclosed fan cooled type (TEFC) Induction motor, with F class insulation, S1 duty and IP55 protection, suitable for 3 phase 415 volts, 1 phase, 230 volts power supply.

The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.

The pump casing shall have threaded ports near suction and delivery flanges for installing suction and discharge pressure gauges. The pump shall also have a threaded drain port at the bottom of casing for draining the pump during maintenance.

The pumps shall be non-self-priming, vertical multistage centrifugal pumps. The pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tiebolts. The base has suction and discharge connections on the same level (in-line). All pumps shall be equipped with a maintenance-free mechanical shaft seal.

The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection, 3 phase, 415 volts, 1 phase, 230 volts, 50 and 60 Hz power supply.

The pump casing shall have material of construction of Cast Iron FG 260 (standard supply) or CF8 (AISI 304), inline suction and discharge port, closed type impeller, stainless steel shaft.

The pump suction and delivery flange connection shall be as per PN 16 standard up to 16 bar pump shut off pressure and as per PN25 for pumps with shut off pressure above 16 bar.

The pump shall be coupled with a Totally Enclosed Fan Cooled (TEFC) type induction motor, with F class insulation, S1 duty and IP55 protection, 3 phase, 415volts, 50 Hz and 60 Hz power supply.

The Pump shaft sealing shall be by mechanical shaft seal of Carbon/Ceramic/NBR/AISI 304 construction suitable for 10 bar pressure rating and water temperature from 0 to +90 deg. C.

The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection. 1 phase, 230 volts, 50 Hz (Standard Supply), 3 phase, 415 volts, 50 Hz.

A water detector is provided in the seal chamber. In case of seal failure if water enters the seal chamber, a signal can be sent to the control panel so that the pump operator is made aware of a potential seal leakage problem.

These pumps shall be available in Noryl or Polypropylene material of construction and closed coupled with standard TEFC motor. They are also available as long-coupled with standard TEFC as well as Flame Proof motor.

The pumps are made of non-metallic, glass-filled Polypropylene construction offering chemical resistance to most acids, alkalis, and inorganic solvents as does the Noryl series.

The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection. 1 phase, 230 volts, 50 Hz (Standard Supply), 3 phase, 415 volts, 50 Hz

The pump shall be designed for muddy water or liquids or effluents with solids or fibers. The liquid shall be compatible with material of construction of the pump.

Waste treatment: Pumping polluted, hot or corrosive waste water containing sand, mud or solids, in suspension, dosing neutralizing liquid, pumping out settled sludge.

The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.

In LCR The pump base and head cover shall be of Cast Iron grade FG 260 as per IS 210/ ISO 186 with inline suction and discharge connection. In LCRI the pump base shall be made of CF8 material, the pump head shall be of Cast Iron grade FG 260, pump head cover shall be of CF8M material. In LCRN The pump base and head cover shall be made of investment cast CF8M Stainless steel.

The pump shall be close coupled with a totally enclosed fan cooled type, 2900 rpm Induction motor with F class insulation, S1 duty and IP55 protection, 3 phase, 415 volts, 1 phase, 230 volts, 50 and 60 Hz power supply

Welcome to the home of water pumps and pumping technology. Our top brand  will not disappoint with their long-lasting top of the line submersible, mono block and domestic pumps and motors for handling liquids, particularly water for agriculture, domestic and industrial uses and other applications like sewerage and sludge and others.

Our range of products include dharani ss sewage pump, lubi heavy duty sewage / effluent pumps, lubi drainage pumps, las series construction drainage pumps and lubi submersible drainage pump.

Part Name Material Motor Housing SS 304 Pump Casing SS 304 Impeller SS 304 - Vortex Shaft SS 304 Mechanical Seal Carbon Vs. Ceramic Silicon Carbide Vs. Silicon Carbide

The pumps shall have non clog, semi open or closed type impeller with material of construction of Cast Iron FG260 (standard supply), CF8 and CF8M, stainless steel shaft, suitable for pumping liquid up to 50 deg. C.

The pump shall be close coupled with dry submersible motor, having class F insulation, IP 68 protection, epoxy sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged, suitable for 3 phase, 415volts, 50 Hz power supply.

The pump shaft shall be made of stainless steel as per ASTM A582 and grade of AISI 410. The Pump shall be supplied with mechanical shaft seal with material of construction of Carbon/ceramic/NBR/SS304.

The pump shall be close coupled with dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, rubber sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged, 1 phase, 240 volts, 3 phase, 415 volts

The pump shall be close coupled with a dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, epoxy sealed cable entry with S1 duty, 3 phase, 415 volts, 1 phase, 240 volts.

Leading Wholesale Distributor of kirloskar self priming mud pump - bare pump, lubi dewatering mud pump, crompton dewatering mud pump and kirloskar dewatering mud pump from Mumbai.

Browse through the extensive list of Submersible Pumps at Moglix. Shop online for other Lubi Submersible Pumpsavailable at Moglix in the lowest price range.

Pumps play a major role in pumping up the fluids. Lubi LBM355 5HP Three Phase Swimming Pool Pump is an ideal choice when you are looking for an efficient one. This is a Three Phase pump. This submersible pump is connected with motors for proper ejacuation of water. This pump is known for its durability and high performance. The submersible pump is very compact, thus the installation process gets easy. Moreover, it is made from premium quality materials. This pump is certified and has passed all quality tests. Lubi brings you one of the best submersible pump available in the market.

Our range of products include non clog mud sewage pump, iron submersible sewage pump, submersible sewage pumps, self priming monoblock mud sewage pump, sewage submersible cutter pumps and self priming pump.

Solid Handle SizeUp to 50 mmWe facilitate our clients with Iron Submersible Sewage Pump, which is best in quality and excellent in performance. Impeller of these portable pumps is mounted directly onto the extended shaft of the motor. To give signal against ingress of water into the oil chamber, the pumps are also provided with sensing device. Manufactured using stainless steel and other alloys, these are durable and resistant to wear & tear. If the client demand for motor protection, sensors are provided in windings which trip the circuit on reaching a preset temperature.

Delivery Size32 mm to 100 mmWe facilitate our clients with Submersible Sewage Pumps, which is best in quality and excellent in performance. Impeller of these portable pumps is mounted directly onto the extended shaft of the motor. To give signal against ingress of water into the oil chamber, the pumps are also provided with sensing device. Manufactured using stainless steel and other alloys, these are durable and resistant to wear & tear. If the client demand for motor protection, sensors are provided in windings which trip the circuit on reaching a preset temperature.

We deal in Sewage Submersible Cutter Pumps.It is used in wastewater treatment plant, medical waste disposal, industrial waste disposal, mud treatment plant, hotel waste management, ext.

PressureUp to 5.5 kg/cm2We deal in different series in Self Priming Mud Sewage Pumps. This is also known as Self-Priming Non-Clog mud/sewage Pump; Self-Priming Non-Clog mud/sewage pump with Mechanical seal and also it is in self-priming mud mono block pump. These are mainly used in loading mud/sewage, effluent etc.

Sewage PumpWe are a leading Manufacturer of submersible sewage pump, submersible sewage cutter pump, submersible cutter sewage pump, submersible sewage pumps, stainless steel sewage pump and abs sewage pump from Coimbatore, India.

Our Submersible Sewage Cutter Pump are ideal for waste water treatment of chemical industry, medical, industry, hospital. Laboratory, electronics industries, drainage of food market, waste water treatment of animal husbandry, water refining tank waste water plant, drainage of building basement, waste water treatment of food industry, pulp and paper industry, steel mill, and other industries.

Speed of flow is superiorly designed and can be applied within big pump housing and impeller to achieve high efficiency and high performance for any waste water

Designed for draining abrasive water from construction sites, mines, docks, flooded areas, basement dewatering etc. These easy-to-install pumps are often used in tunneling and mining where the reliability of the equipment is a crucial parameter. These pumps have an excellent performance capacity with high motor power combined with compact light weight design. It is portable and self priming with bottom suction which enables the pump to dewater up to the lowest level.

We are a highly acclaimed name to offer a gamut of superior quality Submersible Sewage Pump. Submersible sewage pumps are directly driven by an air filled electric motor cooled by surrounding sewage. This ensures that the pumps are fabricated from high grade raw material using state-of the-art machines to offer optimum performance at users end. Equipped with an automatic reset motor protector / heavy duty bearing high efficiency copper wound motor / in-built lip seal to prevent ingress of silt & sand / with / without float switch.

Sewage Pump Cutter Series - We are reputed for supplying the Submersible Cutter Sewage Pump. These have been perfectly made and are equipped with machinery components that will only improve their performances. As far as installing and operating them are concerned, it is quite hassle-free. All-Flow will continue to grow and develop at a rapid speed and we will be one of the best pumps distributing in this field. Whenever and wherever the customers are, we are always there to help.

we are one of the leading manufacturers of various types of Sewage Submersible Pumps for wastewater and industrial applications. With our commitment to quality and customer satisfaction, we have grown multifold with dealer network all over India and esteem clients in all sectors.

We excel in offering a wide range of Stainless Steel Sewage Pump. Our pumps are available in various range, dimensions and thickness as per the exact requirements and demands of clients. Manufactured using top quality components and following the international market trend, these Stainless Steel Sewage Pumps are acclaimed for durability.

Matching up with the ever growing demands of the customers, we are involved in offering high quality assortment of ABS Sewage Pump. Our product range is known for its rugged construction, longer service life and easy installation. To attain the maximum satisfaction of clients, we are providing these products at industrial leading rate.

Being a quality oriented organization in this business, our company is involved in offering a supreme quality range of Cast Iron Sewage Pump to our clients. This product is made with high quality of material and enriched with sharp edge technology. Our products are tested on different quality parameter before dispatching to the market.

We are a precursor in manufacturing and supplying an extensive range of Clean Water Submersible Pump. We have implemented leading technology to design the pumps and installed an induction motor that is insulated with a high grade protective coating to prevent over heating conditions.Features:

With the help of our professionals, we are able to offer excellent quality Cutter Sewage Pumps. The offered sewage pumps are highly demanded in agricultural industry. These sewage pumps are precisely engineered in adherence to the industry quality standards using supreme quality components and contemporary technology by our vendors’ experienced professionals. Our valuable clients can avail these sewage pumps from us in varied technical specifications at most reasonable price.

Our company is well known for offering Sewage Pump of top quality at highly reasonable rates. We provide these items with the help of the most trusted vendors available in the industry. The skilled supply team of our firm makes sure that these vendors hold the necessary certification and authorization. Besides this, our vast distribution network makes sure that these items are provided to the customer within the scheduled time frame without any hassles. We are eminent leaders in the industry and offer our clients some of the best quality Drainage Pump.Of premium brands these products are obtained by us from reputed vendors in the industry. These vendors ensure their fabrication from top-notch material using innovative technology. Customers value these products for their modern design, sturdy construction, tough structure, wearing resistance and smooth operation. Featuring these outstanding properties these products can be availed from us at competitive rates that suit client budgets

We offer our prestigious clients the premium range of Sludge Pump. In synchronization with the set industry standards, our provided pump is well-manufactured using high grade components and latest technology. Owing to its durability and less maintenance, this pump is widely appreciated by our precious clients. Moreover, to ensure the best quality, the offered pump is stringently checked by our quality experts against different quality parameters.

Backed by our team of experts in this domain, we are instrumental in offering Mud Sewage Pumps. Our Submersible Pump is a single stage, the submersible and centrifugal pump of closed coupled construction. Our pump range is extensively used for handling of municipal and industrial waste water. We avail this pump to our client in very affordable rates.

We offer this innovative range Submersible Slurry Pump which finds extensive applications in Agriculture irrigation, drainage of fishing ponds, aqua farm, subway, flood control, water supply for landscape.

Our Sewage Chopper Pumps are ideal for waste water treatment of chemical industry, medical, industry, hospital. Laboratory, electronics industries, drainage of food market, waste water treatment of animal husbandry, water refining tank waste water plant, drainage of building basement, waste water treatment of food industry, pulp and paper industry, steel mill, and other industries.

We are engaged in offering our valuable clients a premium quality assortment ofSewage Grinder Pumps. At our vendor"s end, provided pumps are manufactured under the vigilance of skilled professionals making use of quality assured components with the aid of innovative technology. Our offered pumps are widely used in bath tubs, washing machines for management of waste water. To ensure their functionality, these pumps are precisely inspected by the quality examiners as per the preset guidelines of the industry.

With an increased proportion of technology, we are offering a qualitative assortment ofSubmersible Wastewater Pump. Backed by a team of experts, this is manufactured using high grade raw material and advance technology by our skilled professionals. Used for pumping clean or muddy water from low pressure to high pressure. Furthermore, offered pump is availed in various capacity and specifications, as per the varied needs of our valuable clients.

With our expertise in this domain, we offer Drainage Pump that are easy to maintain and resistant to wear & tear. These are durable and mainly used in steel plants and for agriculture purposes. We make use of quality components and spare parts in manufacturing process to ensure long working life and outstanding performance of Sewage Pumps.

With our expertise in this domain, we offer Mud Pumps that are easy to maintain and resistant to wear & tear. These are durable and mainly used in steel plants and for agriculture purposes. We make use of quality components and spare parts in manufacturing process to ensure long working life and outstanding performance of Sewage Pumps.

Our Chopper Pumps are ideal for Civil engineering, drainage of subway / tunnel for solid sediment, water treatment of ironworks, mobile use for drainage of public facilities, removal of sludge at harbor / river, other drainage of slurry in the industries.

Pump housing and stress eliminating plate are both made of high wear-resisting cast iron for durability, and an innovative design between pump housing bracket and mechanical seal lid to reduce flow stress and last the life of seals longer

With an increased proportion of technology, we are offering a qualitative assortment ofDrainage Pump. Backed by a team of experts, this is manufactured using high grade raw material and advance technology by our skilled professionals. Used for pumping clean or muddy water from low pressure to high pressure. Furthermore, offered pump is availed in various capacity and specifications, as per the varied needs of our valuable clients.

Wastewater Pumps available in series from 1.5 Hp to 50 Hp with high discharge head from 2 mtr to 60 mtr. The pump outer body is completely Stainless Steel 304 with twins tungsten carbide mechanical seal for long life and for rotor shaft SS 431 for the better magnetic result. The pumps are utilized in building construction, steel plants, mines, power stations, sites etc.

Portable Dewatering Pumps, light weight, handy, compact, devoted to design and manufacturing for application in Steel Plants, Power Plants, Irrigation Projects, River water Pumping, Construction sites and all types of drainage applications.

A Slurry Pump is a type of centrifugal pump, lobe pump or peristaltic hose pump in physics principle that increases the pressure of liquid and solid particle mixture (aka slurry), through centrifugal force (a rotating impeller) and converts electrical energy into slurry potential and kinetic energy.

A Grinder Pump is a wastewater conveyance device. Waste from water-using household appliances (toilets, bathtubs, washing machines, etc.) flows through the home"s pipes into the grinder pump"s holding tank.

Backed by immense knowledge and industry-experience, we are able to offer a wide range of Waste Water Lifting Pumps. Offered sewage pump is manufactured with well-tested material and leading technology in adherence with set industry norms. This sewage pump is applauded for its salient features. Moreover, our customers can avail this sewage pump at nominal rates.

The relatively small size and weight make these pumps specially suitable for temporary services like of construction sites and for emergency services in case of flooding

Other Details: Abrasive resistance SS 316 vertex impeller Stainless steel outer casing and strainer Double mechanical seal High cooling effect due to the side discharge channel Continuous Operation Applications: Residential, Commercial, & Industrial Dewatering Construction Sites Civil engineering project Operation Conditions: Flow range (Q ): 100 LPM ~ 4000 LPM Liquid temperature: 5C ~+40C Pressure:60 M Head (Maximum) Frequency: 50/60 Hz MOC: Pump casing NBR/FC200,Cast iron body, Outer Casing & Strainer SS 304, Impeller SS316 Spherical clearance: 20 MM

By keeping track of latest developments, we are offering a wide range Septic Tank Pump. This pump is robustly constructed using high grade raw material and advanced techniques. Widely used for the dewatering from construction sites. To meet the diverse requirements of our esteemed clients, offered range is availed in different capacities and dimensions. Furthermore, clients can avail the offered product from us at the most reasonable prices.We provide following range 1.5HP to 15HP.

The Sewage Cutter Pump are specifically designed for pumping untreated wastewater from domestic, commercial or municipal sources. The high discharge pressure enables transfer of wastewater over longer distances.