lubi mud pump catalogue quotation

Established in the year 1971 at Ahmedabad (Gujarat, India), we “Paras Engineering Company” are a renowned Authorized Wholesale Dealer of an excellent quality range of Submersible Pump, Monoblock Pump, etc. We are a Sole Proprietorship firm and we source products from the reliable market vendors which can be availed from us at reasonable prices. Under the guidance of our mentor “Mr. Ashish Shah”, who holds profound knowledge and experience in this domain, we have been able to aptly satisfy our clients.

Established in year 2008, Neelkantheshwar Engineering And Rewinding Works enganged in Authorised Wholesale Dealing and Service Providing ofPipe Fittings, Cast Iron Pumps, Submersible Pump and many more. The range of products offered by us is of premium quality that boasts of client’s confidence. We consider passing each and every finished product through stringent product inspection processes, in order to ensure that deliveries made at our client’s end, are absolutely flawless.

Product data The Lubi LBM series are self-priming, horizontal, single-stage, centrifugal, end-suction pumps. Pumps are available from 0.75 to 2.2 kW in single-phase and from 0.75 to 7.5 kW in three-phase power supply. Motor and pump are close coupled in a convenient and compact design for quick installation in limited space. They are also available as bare pump unit which are suitable for coupling with motor / engine. The pump is fitted with a gland packing and single piece pump-motor shaft (in close coupled version). Mechanical shaft seal is available in 0.75 kW models. The pumps have...

Product data Operating conditions Head range The pump is fitted with a Totally Enclosed Fan Cooled, 2-pole or4-pole induction motors which performance Liquid temperature range: 0°C to +90°C Total suction lift : Up to 8 metres Pumped liquids These pumps are designed for liquids which are non- aggressive and non-explosive, muddy water, with or without solids up to 20 mm grain size or fibres. Pump location The pumps have been designed to operate in a non- aggressive and non-explosive atmosphere. The relative humidity should not exceed 95%. Curve conditions The conditions below apply to the...

Base frames Base frames The dimensional sketches below show the dimensions of the base frames fitted to LBS pumps. The type number of the base frame is stated for each LBS pump mentioned in the Technical data. Base frame type No. Base frame

Lubi Electricals Limited. Near Kalyan Mills, Naroda Road, Ahmedabad-380 025, INDIA. Sales Enquiries: mktsales@lubipumps.com, expsasles@lubipumps.com Product Improvement is a continuous process at "LUBI". The data given in this publication is therefore subject to revision.

Welcome to the home of water pumps and pumping technology. Our top brand  will not disappoint with their long-lasting top of the line submersible, mono block and domestic pumps and motors for handling liquids, particularly water for agriculture, domestic and industrial uses and other applications like sewerage and sludge and others.

Water PumpOur range of products include hydropneumatic booster system - hypn series, pressure booster pump - sh/scm series, lubi sewage submersible pumps, centrifugal water pumps, lubi vertical multistage pump and single shaft vertical multistage pump - ro series.

The pump volute casing shall be of cast Iron grade FG260 as per IS 210/ISO 186 with vertical discharge port suitable for pumping liquids upto 50 deg. C.The pumps shall have semi open impeller with material of construction of Cast Iron grade FG260 as per IS 210/ ISO 186.The pump shaft shall be made of stainless steel as per ASTM A582 and grade of AISI 410. The Pump shall be supplied with mechanical shaft seal with material of construction of Carbon/Ceramic/NBR/AISI 304.The pump shall be close coupled with dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, rubber sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged, 1 phase, 240 volts, 3 phase, 415 volts.All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.

Lubi Group of Industries, established in 1965, today Lubi employs 3500 People who are our strength, in Research & Development, Manufacturing Quality Assurance and Quality Sales. We are thus to achieve Annual Turnover of 120 Mio. USD company. The group is not only well placed in India but also has a wide presence in International Market. At present we are exporting our products to Middle East, North Africa and SE Asia including some 60Hz countries like Saudi Arabia, Korea & Philippines.

The LCR, LCRI, LCRN pumps are non-self-priming Pressure Booster Pump. The vertical in-line design enables the pump to be installed in a horizontal plane single system where the suction and discharge connections are in the same horizontal plane (in-line) and have the same pipe sizes. This design provides a more compact pump design saving space and easy pipe work. Pressure Booster Pump consists of a base and a pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tie bolts. All pumps are equipped with a maintenance-free mechanical shaft seal of the bellow type as standard. These pumps are available in various material versions according to the pumped liquid.

The pump volute casing shall be of cast Iron grade FG260 as per IS 210/ISO 186 with vertical discharge port suitable for pumping liquids upto 50 deg. C.

The pump shaft shall be made of stainless steel as per ASTM A582 and grade of AISI 410. The Pump shall be supplied with mechanical shaft seal with material of construction of Carbon/Ceramic/NBR/AISI 304.

The pump shall be close coupled with dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, rubber sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged, 1 phase, 240 volts, 3 phase, 415 volts.

The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, stainless steel shaft sleeve.

The pump shaft sealing will be by either gland packing or mechanical shaft seal suitable for 16 bar or 25 bar pressure rating based on shut off pressure of the pump.

The pump shall be close coupled with a totally enclosed fan cooled type (TEFC) Induction motor, with F class insulation, S1 duty and IP55 protection, suitable for 3 phase, 415 volts, 50 and 60 Hz power supply.

The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.

All cast iron parts shall be CED (cathode electrode deposition) coated for corrosion resistance with uniform coating and controlled deposition thickness of 20-30 microns.Applications:The pump shall be designed for clear, clean liquids which are non-aggressive to the wetted parts and non-explosive, without any solids or fibers.

LVI pumps are non-self priming, single-stage, vertical in-line, close- coupled type centrifugal pumps having radial suction and radial discharge port. Vertical in line pump is designed for non explosive liquids which are clean, and thin without any solid particles. A viscous liquid affects the pump performance in the following ways.

The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.

The pump volute shall be of cast Iron as per grade FG 260 of IS 210/ISO 186 with vertical discharge port. The pumps shall have non clog semi open impeller with material of construction of Cast Iron (standard supply), CF8 and CF8M, suitable for pumping liquids up to 50 deg. C.

The Pump shaft sealing shall be accomplished with double mechanical shaft seal of material Carbon /Ceramic/NBR/AISI 304 Up to 1 Hp and above 1 Hp the mechanical shaft seal material shall be Sic/Sic /Viton /AISI 316 on the pump side.

The pump shall be close coupled with a dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, epoxy sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged application.

Selecting the right pump type can be challenging. Azcue Pumps has a variety of pump types to choose from including variations in orientation, priming capabilities, motor configuration, suction method to name a few. In addition to the variety in pump capabilities, Azcue Pumps offers different metal construction to fit your needs. Browse the selection of pumps below or contact usand let one of our experts assist you in finding the right pump for your needs.