mud pump 1 hp single phase manufacturer

V-Guard Sewage Pumps from 1hp-2hp, are specifically designed for lifitng water from, Septik Tanks, Flooded Basements, underground tanks. With Pump Size of 2 inch (50mm) it can provide a discharge of upto 45000 LPH, and can work upto a head of 15m. This Pump comes with a Floating Switch, that Automatically Turn ON/OFF the pump when Water Level fluctuates. With an Experience of more than Four Decades, V-Guard has lived upto expectation of Consumers with a dedicated All India Service Network. The products are specifically Engineered to woek efficiently and last a lifetime. V-Guard Domestic pumps are designed specially to ensure s smooth and silent solution to modern households in India. Long Lasting, Sturdy, Lightweight and Compact, the pumps Guarantee a Satisfactory Experience to your family.

Mud Pumps come in both electric and gas / diesel engine drive along with air motors. Most of these pumps for mud, trash and sludge or other high solids content liquid dewatering, honey wagon and pumper trucks. Slurry and mud pumps are often diaphragm type pumps but also include centrifugal trash and submersible non-clog styles.

WARNING: Do not use in explosive atmosphere or for pumping volatile flammable liquids. Do not throttle or restrict the discharge. Recommend short lengths of discharge hose since a diaphragm mud pump is a positive displacement type and they are not built with relief valves.

The pump volute shall be of cast Iron as per grade FG 260 of IS 210/ISO 186 with vertical discharge port. The pumps shall have non clog semi open impeller with material of construction of Cast Iron (standard supply), CF8 and CF8M, suitable for pumping liquids up to 50 deg. C.

The Pump shaft sealing shall be accomplished with double mechanical shaft seal of material Carbon /Ceramic/NBR/AISI 304 Up to 1 Hp and above 1 Hp the mechanical shaft seal material shall be Sic/Sic /Viton /AISI 316 on the pump side.

The pump shall be close coupled with a dry submersible motor, having class F insulation, IP 68 protection, 2900 rpm, epoxy sealed cable entry, with S1 duty for fully submerged and S3 duty for partially submerged application.

Offering you a complete choice of products which include 2 hp horizontal open well pump, 1 hp borewell submersible pump without panel, 1 hp single phase openwell submersible pumps, 5hp 50 stage submersible pump, 2hp borewell submersible pump without panel board and v6 5hp 10stage submersible pump.

Our clients can avail from us Self Priming Mud Pump that comes with self priming action, which ensures easy maintenance. These are durable, cost effective and also provided with non-clogging impeller to handle suspended solids. Designed using latest technology, these pump optimum performance and are used in steel & thermal plants.

The crank gear and connecting rods drive a rotary movement that is transferred by the motor transmission. The pressure is produced by the piston in the cylinder due to which the mud is sucked. Following the operation, the suction valve is closed when it moves to left. As the pressure increase in the pipeline, the valve is forced to open and mud is released.

In accordance with the operating liquid displacer type being incorporated, the pumps are subdivided into piston units and plunger-type units. The liquid discharge uniformity is independent of head. The pumping plants are used actively for the processes with the liquids containing solid inclusions in high amounts. Incorporating the self-suction function in piston unit, the liquid is sucked and discharged twice in mud pumps during the single shaft turn, making themselves the double-action pumps whereas, the mud plunger pumps are single-action pumps where the liquid is sucked and discharged only once during a shaft turn.

The single direct-action three-piston pumps prove to be better than other types of drilling. These pumps demonstrate much more uniformity in mud delivery, lesser weight, and easy mounting when compared with two-cylinder units.

Depending on the number of cylinders, the pumping plants are classified into the following categories, single-cylinder, double-cylinder, three-cylinder and multi-cylinder pumping plants. These cylinders may be vertical or horizontal. Comparatively, the multi-cylinder pumping plants will cost higher but don’t feature any significant advantages other than the single-cylinder.

When drilling, there might occur the necessity of mud pumping out- and flushing-out, so there are various types of pumps available for such operations which are required to be installed on drilling rigs.

Sucker-rod pumps: In sucker-rod pumps, the pumpjack is a driver. This pump is installed at the bottom of the well. The reciprocating movements of the pumpjack are converted into liquid flow by the pump, which results in delivery of liquid on the surface. These pumps move oil with various admixtures demonstrating high level of capacity.

Screw pumps:The screw pumps are small-sized and are generally used to deliver mud into a centrifuge. These pumps have the rotor and stator as the major structural components and the material used to manufacture these components suit right for smooth pumping of liquids with solid inclusions and high level of viscosity. The pumped liquid flows with stable pressure, shaft slowly and the flow is free of vortexes. These pumps comparatively require minimum service.

Well pumps: These pumps are submerged into wells. The ground part of the plant is a transformer substation equipped for start and adjustment. The pump has a vertical structure, with a fixed cylinder and single-action. A plunger and valve are moving parts. The pumped liquid may contain water content of up to 99% at the temperature as high as 130ºC.

All the mud pumps have few general advantages that include the capability to process liquids and substances with high level of viscosity and with admixtures. Also, enabling the smooth flow of substances, free of pulsations or suspensions mixing are counted under the major advantages of incorporating mud pumps. The pumps have high suction power and small weight, easing out the transportation and installation at remote oil fields. They are highly reliable and also affordable.

There are various types of mud pumps available for different purposes. So, it is important to incorporate the right one for your purpose. A Professional help in getting the right mud pump would be a good and safe option.

We are providing our customers with a very high quality Crompton Greaves Selfpriming Dewatering Mud Pumps. They are manufactured using very high quality raw material procured from the reliable vendors of the industry. It is a cost effective product and is easily available to our clients. The product is manufactured under the surveillance of our expert professionals keeping in mind the latest market trends.

We sell our commercial and residential pumps via an extensive distributor network. If you’re a contractor, you can purchase our products at well-known national industrial supply outlets like W.W. Grainger, Ferguson, and WinSupply. To find a distribution partner near you, visit our Distributor Search page and fill in your zip code. You can also check out the companies’ websites for additional information.

If you’re new to these systems, you may need assistance setting up and installing one of our pumps, and both contractors and product owners may need timely service on occasion. If you’re looking for a qualified installer for Zoeller pump products or need help with maintenance and repairs, you can find one quickly and easily by visiting our Service Locator page. We’ll direct you to a company that can respond to your needs.

If you ever need to replace worn or damaged pump parts, you can order what you need directly from us. Visit our Service Parts page, select the product and specific components you require, and complete the easy, convenient checkout process.

Feel free to contact us to learn more about our broad pump selection and service offerings. We can also help you find a distributor or service provider near you.

Single Phase Mud Dewatering Pump, Industrial, Electric Motor Phase Single Phase Power Source Electric Type of End Use Industrial Motor Horsepower 1 to 2 HP Power 750 watt (1 HP) & 2 HP heavy duty motor with all copper winding Max head 14.5 m Max Disc...

Sewage submersible pump 1 hp price is reasonable. 1 hp industrial sewage pump adopts unique impeller structure and new mechanical seal. 0.75 kW sewage pump with 380V voltage and 10 m3/h rated flow, has excellent overflow.

Double guide rail automatic coupling installation system, to the sewage water submersible pump installation and maintenance has brought great convenience.

Large flow channel anti-clogging hydraulic parts design, greatly improve the ability of sewage through, can effectively through the sewage pump diameter of 5 times the fiber material and the diameter of about 50% of the dirty water sewage pump diameter solid particles.

Mechanical seal adopts double series seal, material is hard corrosion resistant tungsten carbide, durable, wear-resistant, can make the pump safe continuous operation for more than 8000 hours.

Effluent pumps. These pumps are usually in a small on-site system. They pump effluent flowing out of the septic tanks. The effluent is a clear liquid. It has solid developing out of the septic tank. It"s able to pump more efficiently and higher levels when compare it to other sewage pumps.

Solid handling pumps. They are also known as sewage ejector pumps, they propel raw sewage. When it comes to raw sewage, it contains a lot of solids for most pumps to handle.

Grinder pumps. This pump is more like the solid handling pump. It is able to propel raw sewage. The grinder pump is different from the solid handling pump as it has rotating blades. The rotating blades are like the garbage grinders which grind and cut solids into smaller particles before pumping the sewage.