weatherford t425 mud pump factory

Qingdao Hongbo Petroleum Machinery Co., Ltd. (HB) as one of the leading Asia-based global providers in petroleum machinery, are specializing manufacture in mud pump and mud pump spare parts used for onshore & offshore oil & gas well drilling, workover and water well drilling.

Today, HB has gone through API inspection. Additionally, our products in quality are equivalent & interchangeable with those of OEM mud pumps including EMSCO, Gardner-Denver, National, Oilwell, IDECO, Skytop Brewster, OPI, Wirth and Wilson, and also they are not limited within those categories.

Meanwhile, we dedicate precious resources in researching and developing. The products for triplex and duplex mud pumps we manufactured are referring as below:

Premium chrome Liner, Chrome-plated Liner, Hardened Steel Liner, Ceramic Liner, 3-web Valve and Seat, 4-web valve and seat, Full-open Valve and Seat (KQ/G2/FO), Rubber Renewable Piston, Urethane Renewable Piston, Rubber Bonded Piston, Urethane Bonded Piston, Piston Rod, Piston Rod Clamp, Upper and Lower valve Guide, Extension Rod, Threaded Ring, Liner End Cover, Valve Pot Cover, Cylinder Head, Cylinder Head Plug, Liner Seal, Valve Cover Gasket, Cylinder Head Gasket, Module (Fluid ends), Hammer Union, Centrifugal pump, etc..

Weatherford’s Horizontal Multiplex Pump is a traditional horizontal, packed plunger pump designed to basic compliance of API 674. It features pressure ranges from 500 psi to 10,000 psi and flow ranges to 20,000 BFPD. This reciprocating pump line has over 25 input horsepower ratings from 5 to 950 HP.

With an extensive range of capabilities, this pump was designed as an “all purpose” fluid handling solution for most industrial & oilfield applications.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Weatherford products and services are subject to the Company’s standard terms and conditions, available on request or at weatherford.com. For more information contact an authorized Weatherford representative. Unless noted

otherwise, trademarks and service marks herein are the property of Weatherford. Specifications are subject to change without notice. Weatherford sells its products and services in accordance with the terms and conditions set

OEE is specialized in those equipments and spares for drilling rigs and mud system. All exported products will be approved by API or/and ISO. A reliable quality is guaranteed first.

Shale Shaker, Shaler Shaker screens(Derrick, Swaco, Brandt), Degasser, Mud Cleaner, Desander, Desilter, Decanter Centrifuge, Jet Mud Mixer, Mud Hopper, Mud Agitator, Mud Gun, Mud Tanks, Rig Mats,etc.

Mud Gate Valves, Mud butterfly valves, Mud tank Unions, Hammer Unions, Air Grip Unions, Drill Pipe Wiper, Mud Pressure Gauges, Gates V-belts, Air Flex Clutch, etc.

The SA400 is a high-pressure mud pump powered by a Tier 4i (EU Stage IIIB) or Tier 3 (EU Stage IIIA) engine. It features an engine-mounted lubrication pump to provide constant flow through the system at any pump speed. During drill rod makeup/breakout, a clutch with continuous duty throw-out bearing allows extended clutch disengagement and a suction inlet valve suspends charged flow.

Merit Pump and Equipment Company is your direct Weatherford pump distributor. We offer you the complete line of Weatherford reciprocating pumps, including triplex and quintuplex. We can assist you in all your pump service needs. If you are looking for Weatherford pump repair or supplies, we are the specialist team you can count on every time.

Established in 1990, our facility in Wooster, Ohio includes a complete pump repair service center for your major or minor repairs. We also have a knowledgeable sales department ready to answer any of your questions and supply you with the right Weatherford pump equipment and guidance. Our highly trained specialists will work with you to understand your requirements and match you to a specific pump application. We will size the right pump for you and provide ongoing support.

We are a dependable, experienced Weatherford pump service and supply center, & an official Weatherford pump distributor. We are ready to assist you with any inquiry.

Weatherford T-Series and W-Series are versatile pumps, offered in a variety of material and design options that enable them to be used in a wide range of applications. The Weatherford pumps cast iron power frame ensures robust, fatigue-free durability and excellent wear resistance of moving surfaces. The fluid cylinders are made from either forged 4140 carbon steel, 2205 duplex stainless-steel, or 955 cast nickel-aluminum-bronze materials for increased durability and extended life.

Critical components like the crankshaft, connecting rods, crossheads, and bearings are larger than the industry-standards. This enables them to withstand continuous duty service and harsh operating conditions. Weatherford provides tungsten-carbide, coated plungers as standard.

Weatherford offers optional solid ceramic, or ceramic-coated plungers on request for special applications with pumping abrasive or corrosive fluids for superior durability. The oil trough is designed to evenly lubricate the crossheads and wrist-pin bearings during operation to reduce wear and extend component life. A variety of packing arrangements are available to meet the requirements of any application. Weatherford pumps are API-674 compliant upon request.

The Weatherford W-Series triplex and quintuplex plunger pumps are rated for flows from 6 GPM to as high as 688 GPM intermittent duty (533 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI.

The Weatherford’s T-Series triplex plunger pumps are smaller pumps rated for flows from 0.50 GPM to 85 GPM intermittent duty (or 56 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI.

The Weatherford’s T-Series triplex plunger pumps are smaller pumps rated for flows from 0.50 GPM to 85 GPM intermittent duty (or 56 GPM continuous duty) with pressure ranges from 600 up to 5,000 PSI. These pumps are offered with carbon steel or duplex stainless-steel fluid end cylinders.

If you need Weatherford pump services, including repair and equipment, please contact us today. We will provide you with decades worth of guidance on your current Weatherford pump or help with your future product. Our specialists are eager to work with you. Call us today at 800-700-8265.