600v dc traction motor mud pump manufacturer

We supply a full line of AC and DC drilling motors for SCR and VFD electric drilling rigs. Our model SDM-800DC DC drilling motor is an identical match of GE752 traction motor.

It has the same footprint and is interchangeable with it. Our AC drilling motors are similar with GEB22 drilling motors but with more models and options. The typical application of our traction motors in drilling industry includes mud pumps, drawworks, and rotary tables.

Grade Safety IP44 of Motor is force-ventilated motor, which blower motor has two poles and is blast motor (EX Ⅱ BT4), which should use in no acetylene environment.

The Joliet C76YLB Series Wound New Drilling Motor delivers a continuous ratin for mud pump and rotarty table applications of 600 HP and intermittent rating for drawworks applications of 700 HP.  Continuous rating is at 750 VDC, 640 Amperes, 1200 RPM, 40°C Ambient.

The Joliet C76YLE Shunt Wound New Drilling Motor delivers a continuous rating for mud pump and rotary table applications of 600 HP and intermittent rating for drawworks applications of 700 HP.  Continuous rating is at 750 VDC, 640 Amperes, 1400 RPM, 40°C Ambient.

In the drilling industry where time truly does mean money, design and efficiency are hand-in-hand with business success. BREUER solutions and mainly the new VFM (Variable Frequency Motor), a motor with integrated VFD, bringing this advantage for your land and offshore drilling operations. For decades, BREUER has specialized in finding easier, more cost-efficient and more efficient ways for their customers to minimize downtimes and make drilling rigs as intelligent, productive and profitable as they can be.

BREUER’s Made in Germany motors get the job done all over the world in a wide variety of sectors. Over 800 of BREUER’s Variable Frequency Motors (ecoVert VFM) have stood the mining test since the turn of the century. Moreover, in oil and gas drilling, over 1,800 AC motors and more than 400 AC TopDrive motors from the Bochum, Germany plant are currently in use. BREUER is combining the advantages of its company’s own VFD technology with the strengths of the oilfield AC motors in one VFM. Take advantage of this innovation for your oil and gas drilling work.

THE PERFECT ALL-IN-ONE SOLUTION When the Oilfield ecoVert VFM is used, a Power Control Room (PCR) is, for the most part, not needed. The motor is suitable for existing rigs with a third Mudpump as well as for converting rigs from DC to AC technology. During the retrofit process, work in the Power Control Room is not or only minimal required.

VFM IS ALWAYS INTERCHANGEABLE WITH EXISTING MOTOR TECHNOLOGY. The ecoVert VFM is ideally suited for retrofitting. It replaces old components with ones that are structurally identical but better. The water and air-cooled motors for onshore and offshore drilling rigs are compatible with every type of equipment and can be easily maintained and replaced. As a result, investment, commissioning, and operating costs can be considerably reduced.

Cameron AC electric motors improve the performance of your mud pumps, drawworks, and rotary tables. Custom configuration is available, and ATEX, ABS, and DNV certification can be provided for new motors. Our flexible design offers you a choice between a tapered shaft or BullShaft to meet specific application requirements.

Cameron AC traction motors are designed and manufactured to handle deep drilling applications. Available in 400-hp, 550/600-hp, 1,150-hp, and 1,500/1,600-hp models, these inverter motors are designed specifically for 460-V to 690-V duty and deliver maximum efficiency. To meet varying installation requirements, our AC motors are available in vertical or horizontal designs.

Unlike conventional traction motors, Cameron AC motors have a unique design that meets the requirements of oil and gas applications. A key characteristic of the motor is the ability to provide a high level of torque at speeds ranging from 0 to 800 rpm (select motors can achieve a maximum speed up to 3,000 rpm). The torque generated at a wide range of speeds can enhance the performance of a broad array of drilling equipment driven by these motors.

E1700 Drawworks Ideco, with Two (2) 752 Type series wound DC traction motors with 7040 Baylor Auxiliary Elmagco Eddy Current brake. Rotary Skid (Drawworks Driven Rotary)

Mud Pumps Three (3) Continental Emsco 1600 HP packages each with master skid, two (2) 752 series wound DC traction motors, drive sheaves, belts, belt guards, charge pump and liner wash system as seen in pics.

Mud System 2500 BBL., mud system complete with agitators, centrifugal pumps, Three (3) Swaco 4 Panel Shakers, Desander, Desilter, Vacuum Degasser and mixing hoppers. Tanks & Houses Two (2) Water Tanks (1x Round, 1x Square Crimp) One (1) Trip Tank One (1) Diesel Fuel Tank One (1) Parts/Change House One (1) Doghouse

Miscellaneous Gardner Denver 500T Block w/Mast Raising Beckett 27.5” Ideco K Rotary Table, Mud/Gas Separator, Koomey BOP Closing Unit, Drill line spooler, Two (2) Air hoisting winches. Two (2) Junk Bin Skids w/ Misc Handling Tools, etc.

Our DC systems are based on an industry standard design and inherit the dependability, reliability and ease of maintenance of this concept. Our AC systems are built around ABB drive and control technology. Enhanced systems, PLC control and serial links to the Drill Floor are available to reduce rig-uptime for land rigs.

We also have the expertise to source replacements for obsolete spare parts, and re-engineer older systems with new equipment, including adding extra SCR sections for third Mud Pumps or Top Drives, and additional generator sections for additional rig power.

As to the electric system, we compared the DC drive rigs and AC converterdrive rigs deeply, we recommend AC (AC-VFD-AC)converter drive rigs due to the following advantage of AC Converter drive rigs.

MUD PUMPS:Two (2) Gardner Denver PZ-11"s (1600 hp each) With 7500 PSI Southwest fluid ends, powered by (4) AMD 800 hp DC Traction Motors. 5x6 Charge Pumps, Belts, Belt Guard.