600v dc traction motor mud pump made in china

•This drilling rig mainly consists of crown block, traveling block, hook, swivel, rotary table, drawworks, mud pumps, mast and substructure that all are in compliance with API specifications.

自动送钻装置Automatic driller consists of motor, reducer , cluth,etc, which can raise mast and substruture independently.  Atomatic  driller also can be driven by its own motor, not driven by drawworks motor.                                                           specification of automatic driller motor.                                               •Rated Power  : 45 kW

中速离心机•Capacity: 40m³/h;                                                                         • Rotary speed:3200 RPM                                                     • Main motor power: 30kW                                                        • Auxiliary motor power: 7.5kW                                                    • Dimension:2900*1800*1320LW450-842NA1set

高速离心机•Capacity: 40m³/h;                                                                         • Rotary speed:1650-2200 RPM                                                     • Main motor power: 18.5kW                                                        • Auxiliary motor power: 5.5kW                                                    • Dimension:2440*1740*1300GLW355-1250NA1set

6.1.14Brake resistance• 6*400kW                                                                    • Including brake resistance of mud pump, drawwoks, rotary table and auto-driling1set

井电including the following power supply : solid control( mud tank),mast,substructure,drill floor,oil tank,water tank, and relevant lightings                                                                                   •Rated voltage: 380V/220V;                                                     •Rated frequency:  50HZ;                                                        •Ambient temperature: -20℃-+50℃;                                  •Relative Humidity: 20℃(≤90%)

7.2Cable tray 电缆槽cable tray are as follows:                                                        •between generator and mud pump;                                    •solid contro area;                                                               •from ground to drill floor;1set

8.4Communication system 通讯系统Communication system                                                         •mainly includes the following intercom system: racking board, driller control room, pump room, mud tank area, and supervisor, which consists of public address system, microphone, telephonel, UPS, etc.                                               including 6interphones and 5 proof-telephones without host.1set

液压站It is fixed in the dog house,and can proivde hydraulic pressure for the following equipments: hydraulic power tongs, winch, buffer cylinder, hydraulic cathead,etc.It can be also power source for other hydeaulic facilities.                                   Specification:                                                                        Main pump unit:                                                                     •Rated flow: 120L/min;                                                         •Rated pressure: 20Mpa;                                                             •Engine power:37kW;                                                           Petrol pump unit                                                                  •Rated flow: 40-60L/min;                                                                  •Rated pressure:16.6Mpa;                                                                •Engine power:3kW;YZBS-120LD-31set

We supply a full line of AC and DC drilling motors for SCR and VFD electric drilling rigs. Our model SDM-800DC DC drilling motor is an identical match of GE752 traction motor.

It has the same footprint and is interchangeable with it. Our AC drilling motors are similar with GEB22 drilling motors but with more models and options. The typical application of our traction motors in drilling industry includes mud pumps, drawworks, and rotary tables.

In the drilling industry where time truly does mean money, design and efficiency are hand-in-hand with business success. BREUER solutions and mainly the new VFM (Variable Frequency Motor), a motor with integrated VFD, bringing this advantage for your land and offshore drilling operations. For decades, BREUER has specialized in finding easier, more cost-efficient and more efficient ways for their customers to minimize downtimes and make drilling rigs as intelligent, productive and profitable as they can be.

BREUER’s Made in Germany motors get the job done all over the world in a wide variety of sectors. Over 800 of BREUER’s Variable Frequency Motors (ecoVert VFM) have stood the mining test since the turn of the century. Moreover, in oil and gas drilling, over 1,800 AC motors and more than 400 AC TopDrive motors from the Bochum, Germany plant are currently in use. BREUER is combining the advantages of its company’s own VFD technology with the strengths of the oilfield AC motors in one VFM. Take advantage of this innovation for your oil and gas drilling work.

THE PERFECT ALL-IN-ONE SOLUTION When the Oilfield ecoVert VFM is used, a Power Control Room (PCR) is, for the most part, not needed. The motor is suitable for existing rigs with a third Mudpump as well as for converting rigs from DC to AC technology. During the retrofit process, work in the Power Control Room is not or only minimal required.

VFM IS ALWAYS INTERCHANGEABLE WITH EXISTING MOTOR TECHNOLOGY. The ecoVert VFM is ideally suited for retrofitting. It replaces old components with ones that are structurally identical but better. The water and air-cooled motors for onshore and offshore drilling rigs are compatible with every type of equipment and can be easily maintained and replaced. As a result, investment, commissioning, and operating costs can be considerably reduced.

Cameron AC electric motors improve the performance of your mud pumps, drawworks, and rotary tables. Custom configuration is available, and ATEX, ABS, and DNV certification can be provided for new motors. Our flexible design offers you a choice between a tapered shaft or BullShaft to meet specific application requirements.

Cameron AC traction motors are designed and manufactured to handle deep drilling applications. Available in 400-hp, 550/600-hp, 1,150-hp, and 1,500/1,600-hp models, these inverter motors are designed specifically for 460-V to 690-V duty and deliver maximum efficiency. To meet varying installation requirements, our AC motors are available in vertical or horizontal designs.

Unlike conventional traction motors, Cameron AC motors have a unique design that meets the requirements of oil and gas applications. A key characteristic of the motor is the ability to provide a high level of torque at speeds ranging from 0 to 800 rpm (select motors can achieve a maximum speed up to 3,000 rpm). The torque generated at a wide range of speeds can enhance the performance of a broad array of drilling equipment driven by these motors.

Liquid Mud - Active/Reserve Storage Capacity Drill Water Storage Capacity Potable Water Storage Capacity Diesel Fuel Storage Capacity No. of Truck loads for all equipment and camp 146 Min. 2700 bbls 1200 bbls 325 bbls 700 bbls 2773 /2232 bbl 1006 bbl 400 bbls 730 bbls

MAST Make and Type Clear Height Base Width Gross Nominal Capacity Hook Load with 12 lines Hook Load with 10 lines Hook Load with 8 lines Max. windload - No setback Max. windload - With setback Crown Block Capacity Number of sheaves Size of sheave grooves Racking Board Make, Type, and Capacity Number of Standpipes Standpipe size Standpipe Pressure 100 mph 84 mph 500 ton 6 sheave cluster + fast line 1 - 3/8" For 14,400 ft 5 DP & 61/2 DC stands 1 5" Minimum 5000 psi Should be self-elevating, drawing required 147 ft is preferred 30 ft 1,100,000 lbs 880,000 lbs Yes 149 Ft 32.8 Ft 1,010,000 lbs 1,010,000 lbs 841,666 lbs 673,333 lbs 107 mph 80.5 mph 500 Ton 6 Sheaves +1 fast line 1 ZYZJ, 17,000 Ft (5 DP, 6 DC) Dual Stand Pipe, H Type Manifold 5 OD, 4 ID 5000 psi

2.3 DRAW WORKS Make and Type Length overall Width overall Weight HP Rating Hoisting Drum Size Brake Rim Size Number of Hoisting gears No/Make/Type/Rating of DC Traction Motors No/Make/Type of Catheads Make/Type of Electric Brake Electric Brake rating 95,000 ft-lb at 50 rpm ACR/SCR/Electric al/Mechanical 25 ft 10 ft 9 inch 72,000 lbs 2,000 BHP 30" x 56" 54" x 10" 4 2/ / / 1000 BHP at 1000 rpm 2/ / / JC 70DB/VFD AC Electric Drawworks 29.44 Ft 10 Ft 115,522 lbs 2000 BHP 30 3/8" X 56 3/4" 63 X 3 Disc Brake DBS-75 Step less speed regulator 2 / YJ13X5/6 / 800 KW at 741 rpm AC motors (VFD controlled) 3/China/Hydraulic Cathead Eaton 436WCB 98,333 ft.lb Independent slick line unit available for taking survey, however, if required, will provide independent sand line unit for swabbing operations. Independent Sandline, 16 OD 23,000 ft x 1/2" dia. IWRC cable. 23,000 x 5/16 Braided Wire 16 Brake Rim

ROTARY TABLE/TOP 2.5 DRIVE (BOTH REQUIRED) Make and Type of Rotary Table Size/Minimum opening Static Load Maximum Torque Maximum speed Number of Transmission speeds Make/Type/Rating of DC Traction Motor Accessories Make and Type of Top Drive Hoist capacity

Must be independently driven and powered capable of switching to top drive operation. ZYZJ, ZP-375 37-1/2 inches 500 tons 37 645 Ton 23.,870 Ft lbs 300 rpm 2 Step less transmission YJ 31D/720KW/AC Motor Master Bushing and 1,2 and 3 insert bowls. Tesco / Varco TDS - 9S or equiv. 500 ton total, API8C, PSL-1, SR-1 350 ton topsub, 273 ton API 5000 psi CWP 0-225 rpm cont. Max 32,500 ft. lb. 700 max. cont. 35000 ft. lb. 2 x 350 HP Yes as specified BPM/TDS-500, DQ 70BSC 500T as per API -8C 350 T top sub 273 ton API 5000 psi CWP 0-220 rpm 55,300 Ft-lb 800 KW 36,900 Ft-lb 2 X 400 KW

ss of Lower Middle rams Make/Type/Size/Pre ss of Lower rams Number of sets of blind and/orshear rams Number of sets and sizes of pipe rams 13-5/8", 10,000 psi 1 set blind, 1 set shear 1 set 3-1/2" pipe rams 1 set 5-1/2" casing rams 2 sets 5" pipe rams 1 set 7" casing rams 1 set 9-5/8" casing rams VBR rams Number and sizes of Kill Line inlets Number and sizes of Choke Line outlets Kill Line valves Choke Line valves Mud Cross Adaptor Spools 2 sets 4-1/2" - 9-5/8" 10,000 psi 10,000 psi 10,000 psi 10,000 psi To conform to above Bidders to list all available types Rongsheng/Single/135/8, 10,000 psi 2 Set Shear-Blind Ram for 5 DP 2 set 3-1/2" pipe rams 2 set 5-1/2" casing rams 4 Sets 5 Pipe rams 2 set 7" casing rams 2 set 9-5/8" casing rams Not Available 1, 4 1/16, 10,000 psi 1, 4 1/16, 10,000 psi Yes, 10,000 psi Yes, 10,000 psi 13-5/8, 10,000 psi Yes, as specified

Make and Type Capacity of reservoir tank No/Size of Accumulator Bottles Master Control Set No/Type of pressure gauges No/Make/Type of air driven charge pumps No/Make/Type of electric driven charge pumps No/Type of Remote Control Stations No/Type/Length of control hoses No/Size of control line suitcases Alarm System Emergency Air Compressor

All mud pumps to be equipped for service. Combined output 1300 gpm @ 2500 psi ZYZS Model ZY11600 Triplex only 1600 HP 5000 psi Triplex 1600 HP 5000 psi

Pressure Maximum SPM Stroke Length Liner sizes available Suction manifold Spare Suction and discharge modules No/Type/Rating of DC Traction motors Make/Type/Press of Pulsation Dampener Make/Type of Suction Damper Make/Type/Size of Centrifugal charge pump Make/Type/Size of charge pump electric motor Length/Size/WP of Vibrator Hose 12 ft/ 4" / x 6" / HP /5" /60 /5000 psi WP 2 ea/ Bidders to list stock to be supplied 1 ea 1 of each /1,300 HP at 1000 rpm 120 SPM 12 7, 6-1/2, and 6 1 ea 1 ea 2 ea /AC VFD Motors/ 720KW K-20, 5,000 psi Suction Strainer China / Centrifugal 5 x 6 Electric Motor 60 HP 14.5 / 4 / 5,000 psi

b Pump No 2 Make and Type Rated HP Maximum Working Pressure Maximum SPM Stroke Length Triplex only 1600 HP 5000 psi Triplex 1600 HP 5000 psi 120 spm 12

Liner sizes available Suction Manifold Spare suction and discharge modules No/Type/Rating of DC Traction motors Make/Type/Press of Pulsation Dampener Make/Type of Suction Damper Make/Type/Size of Centrifugal charge pump Make/Type/Size of charge pump electric motor Length/Size/WP of Vibrator Hose c Pump No 3 Make and Type Rated HP Maximum Working Pressure Maximum SPM Stroke Length Liner sizes available Suction Manifold Spare suction and discharge modules No/Type/Rating of DC

Traction motors Make/Type/Press of Pulsation Dampener Make/Type of Suction Damper Make/Type/Size of Centrifugal charge pump Make/Type/Size of charge pump electric motor Length/Size/WP of Vibrator Hose d Pump No 4 Make and Type Rated HP Maximum Working Pressure Maximum SPM Stroke Length Liner sizes available Suction Manifold Spare suction and discharge modules No/Type/Rating of DC Traction motors Make/Type/Press of Pulsation Dampener Make/Type of Suction Damper Make/Type/Size of Centrifugal charge / 2 ea/ 6" HP 12 ft/ 4"

All mud tanks have roofs and suitable for oil base and water base fluids. All equipment suitable for high temperature service. Tanks are equipped with agitators

fluids. All equipment to be suitable for high temperature service. Tanks are to be equipped with agitators suitable for use with 18.0 ppg mud a Degassing and Solids Control Tank(s) Number of tanks required Length Width Height Capacity No. of compartments Equipment installed Drawing(s) to be provided 1 Tank(s) to have sufficient capacity and be properly designed for efficient degassing and solids control. 330 bbls 6 Shale Shakers and Sand Trap Mud Laboratory Degassing and solids control pits Drilling Degasser Mud Coolers Desander, Desilter Mud Cleaner(s)

Drawings provided 1 10.6 m 3.3 m 3.2 m 340 bbls 6 1 1 1 Ea Vacuum Degasser/HZCQ-240 Portable Mud Cooler/Water and Air Cooling system/500 GPM Integrated with Derrick Mud Cleaner Mud Cleaner/Derrick FLC

2000 Charging pumps, suction & discharge & transfer lines Dump and equalization valves Mud trough, utilities Stairs, walkways, handrails etc. Mixing, Storage, b and Suction Tank(s) Number of tanks Drawing(s) to be provided 3 Active system (a & b) to have a min. cap. of 1500 bbls and be properly designed for well circulation and the isolation, mixing, transfer and storage of different fluids. 2 unit Charging pumps, suction & discharge & transfer lines Dump and equalization valves Mud trough, utilities Stairs, walkways, handrails etc. Drawings provided 3

Width Height Capacity No. of compartments Equipment installed Agitators, Mudguns, pumps, Mixing hoppers, mixing and transfer lines, Mud Trough Dump and equalization valves Utilities

(power, water and diesel lines), Stairs, walkways, handrails etc. c Reserve Mud Tanks Number of tanks Length Width Height Capacity No. of compartments Drawing(s) to be provided 3 Reserve system to have a min. cap. of 1200 bbls and be properly designed for the isolation, mixing, transfer and storage of different fluids Agitators, Mudguns, pumps, Mixing hoppers, mixing and transfer lines, Mud Trough Dump and equalization valves Utilities (power, water and diesel lines) Stairs, walkways, handrails etc. Suitable for use with 18.0 ppg drilling mud Agitators to be capable of being electrically isolated in SCR room To come off flowline direct to waste pit Drawings provided 3 10.6 m 3.3 m 3.2 m 3 X 350 bbls

provided Specifications Bidders to specify for each Shale Shaker: Dimensions Weight Screen Area Drive Power G Force / Adjustable or not? Drive Angle / Adjustable or not? Deck Angle / Adjustable or not? Screen sizes to be made available A range of screen sizes from 20 mesh to 220 mesh should be available. Bidders to list stock B Desander(s) Number Make and Type Capacity Number/Size of cones Centrifugal Pump/Impeller size Electric Motor size C Desilter(s) Number Make and Type 2 ea 1 Ea Flo-Line cleaner 2000-3 panel (Derrick) 6" x 8" 75 HP 1200 gpm at 80 ft of head 1 ea 1 Ea Flo-Line cleaner 2000-3 panel (Derrick) 1500 GPM max 3 / 10 cones 6 x 8 75 HP Derrik Flo-line2000-3 panel Shale shaker 2m X 1.1m X 1.7m 3450 Kg PMD Pyramid Screens 2.5 HP Adjustable 2 Super G vibrating motor Adjustable Adjustable Sizes up to 250 mesh screens

Capacity Number/Size of cones Centrifugal Pump/Impeller size Electric Motor size d Mudcleaner(s) Number Make and Type Capacity Number/Size of cones Centrifugal Pump/Impeller size Electric Motor size Screen sizes to be made available

b Drilling Degasser Make/Type Power Source Specifications Bidder to supply complete set of 280-350 mmHg vacuum, 2.23 KW vacuum motor power HZCQ240, Vacuum Degasser Motor Power 15 KW

run 3 Mud Pump Together , 1040 KW, 1500 rpm, 600 V VFD 9 set AC Drilling Motor, rated power 800 kW / 741 RPM, rate torque 10,303 Nm, 2ea for 3 mud pumps, 2 ea for drawworks and 1 for rotary table.

Installed UPS / Battery g Emergency Power System Make/Type Rating Usage h Rig Lighting Make/Type of main Explosion Proof Lights Numbers/locations Mast Rig floor Substructure Accumulator Unit Choke Manifold Mud Pump Area Solids Control System Active Mud System Reserve Mud System AC Generator House SCR House Rig Utilities House Fuel and Water Tanks Rig floor Substructure Accumulator Unit Choke Manifold Mud Pump Area Solids Control System Active Mud System Reserve Mud System AC Generator House VFD House Rig Utilities House Fuel and Water Tanks The Rig is equipped with 220 V lighting system at all specified locations Above engine is battery start

Sular/ 50 HP, 380 volt, 50 Hz TEFC motors, air cooled oil and after cooler 1 / SCR-240 / 145 psi / 212 CFM Compressor House/ connected with battery operated engine

INSTRUMENTATIO N Driller"s Console Display Make/Type of Weight Indicator Make/Type of Rotary RPM meter Make/Type of Rotary Torque meter Make/Type of Top Drive Torque Make/Type of Top Drive RPM indicator Make/Type of Pump Pressure indicator Make/Type of Pump Stroke counter Make/Type of Pump Stroke totaliser Make/Type of Pit Level indicator Make/Type of Mud Flow indicator Make/Type of Tong Torque indicator Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type Yes, China / Digital type

Drilling b Operations Recorder Make/Type Location Drilling Parameters recorder Hook Load Rotary RPM Rotary Torque Pump Pressure Pump Stroke Counters Top Drive Torque Top Drive RPM c Directional Survey Equipment No/Make/Type of Recorders No/Make/Type of Angle units No/Make/Type of Clocks No/Make/Type of Survey Barrels No/Make/Type of Overshots No/Make/Type of 1 complete set of Totco Equipment

Digital Recording System Yes, China / SZJ type Drillers console Hook Load Rotary RPM Rotary Torque Pump Pressure Pump Stroke Counters Top Drive Torque Top Drive RPM

Chart Reader Tool Box Make/Type of Measuring Line Unit Size/Amount/Strengt h of line Prime Mover d Miscellaneous Describe All pumps, compressors, engines, generators, solids control equipt, degassing equipt, and other machines should have their own instruments as per manufacturers recommendations and as required for safe operation Special e Requirement 2 ea Digital Pressure Gauges for Well Control Purposes (0,-10,000 psi) 2 ea Digital Pressure 10,000 psi Yes, as specified Yes, as specified Model / CJ6000(F)/ Hydraulic 2.5mm / 1 / 4077 KN 7,5 KW

Grapples (basket & spiral) Make/Size/Type for 5" & 6-3/4" DP & DC"s Grapples (basket & spiral) Make/Size/Type for 3-1/2" DP & 4-3/4" DC"s Grapples (basket & spiral) Oversize Lip Guides b Spears

c Taper Taps Make/Size/Type for 27/8", 3-1/2" & 5" DP d Safety Joints Make/Size/Type for 8" Drill Collars Make/Size/Type for 6-3/4" Drill Collars e Fishing Bumper Subs 1 ea Bowen or equiv. 1 ea Bowen or equiv. 1 ea, China safety joint for 8 DC 1 ea, China safety joint for 6-3/4 DC 1 ea Bowen or equiv. China / 2 ea / 3 to 4 and 1 to 3 1/3

Gauge 18-1/2" Bit Breaker & Ring Gauge 17-1/2" Bit Breaker & Ring Gauge 12-1/4" Bit Breaker & Ring Gauge 8-1/2" Bit Breaker & Ring Gauge 6" Bit Breaker & Ring Gauge b Drill Collar Lift Subs Lift Subs for 9" Drill Collars Lift Subs for 8" Drill Collars Lift Subs for 6-3/4" Drill Collars Lift Subs for 4-3/4" Drill Collars c Safety Clamps Make/Type/Size for 9" Drill Collars Make/Type/Size for 8" 1 Varco or equiv. 1 Varco or equiv. 1 ea China Safety Clamp for 9 DC 1 ea China Safety 2 ea 5 ea 5 ea 3 ea 3 ea lifting sub for 9 DC 5 ea lifting sub for 8 DC 5 ea lifting sub for 6-3/4 DC 5 ea lifting sub for 4-3/4 DC 1 ea 1 ea 18-1/2" Bit Breaker & Ring Gauge 1 ea 17-1/2" Bit Breaker & Ring Gauge 1 ea 12-1/4" Bit Breaker & Ring Gauge 1 ea 8-1/2" Bit Breaker & Ring Gauge 1 ea 6" Bit Breaker & Ring Gauge

Drill Collars Make/Type/Size for 63/4" Drill Collars Make/Type/Size for 43/4" Drill Collars d Elevators Centre Latch Elevators for: 8"/6-3/4"/4-3/4" DC"s 1 ea Centre Latch Elevators for: 5"/3-1/2" DP (250 tons) Centre Latch Type Elevators for: 3-1/2" & 27/8" tubing Make/Type/Size e Rotary Slips Make/Type/Size fo r: 9"/8"/6-1/2"/4-3/4" DC Make/Type/Size for: 5"/3-1/2" DP Make/Type/Size for: 31/2" & 2-7/8" TBG 1 ea, Varco or equiv. 2 ea, Varco or equiv. 1 ea, Varco or equiv. 1 Varco or equiv.

2 set China center latch elevator available for each size DC 2 set China center latch elevator available for each size DP 1 set China center latch elevator available for each size tubing

The system should comprise the following: (a) A fixed system with monitors to detect combustible gases and H2S. (b) Portable detectors for combustible gases and H2S. d Fire Extinguishers List and describe the Numbers/Makes/Sizes/ Contractor to supply sufficient fire extinguishers of an appropriate class/size for both the rig and camp. All units are to be regularly inspected and tagged. 10 x 12 fire extinguisher located at all important places in rig site and camp office 4 Gas detectors, located at bell nipple, shale shaker and mud tank

available and used as per IADC and good oilfield practice. List and describe Contractor is to ensure that hardhats, safety boots, gloves, safety glasses and other personal protective equipment are available and used as per IADC and good oilfield practice.