7500 psi mud pump nov pricelist

The NOV FC-1600 Triplex Mud Pump is made of rugged Fabriform construction and designed for optimum performance under extreme drilling conditions. It is compact and occupies less space, yet delivers unequaled performance. The pumps are backed by several decades of design and manufacturing experience, and are considered leaders in the field.

NOV FC-1600 Triplex Mud Pump is conservatively rated at relatively low rpm. This reduces the number of load reversals in heavily stressed components and increases the life of the fluid end parts through conservative speeds and valve operation.

The NOV FC-1600 Triplex Mud Pump design provides an inherently balanced assembly. No additional counterbalancing is required for smooth operation. No inertia forces are transmitted to the pumps’ mountings.

A Triplex Mud Pump sometimes referred to as a drilling mud pump or mud drilling pump. NOV FC-1600 Triplex Mud Pump is a reciprocating piston/plunger pump designed to circulate drilling fluid under high pressure (up to 7,500 psi) down the drill string and back up the annulus. A mud pump is an important part of the equipment used for oil well drilling.

Choose a used Emsco FB-1600 Triplex Mud Pump from our inventory selection and save yourself some money on your next shallow drilling oilfield project. This Emsco FB-1600 Triplex Mud Pump is used and may show some minor wear.

We offer wholesale pricing on new Emsco FB-1600 Triplex Mud Pump and pass the savings on to you. Contact us to compare prices of different brands of Mud Pump. This equipment is brand new and has never been used.

Our large network often has surplus Emsco FB-1600 Triplex Mud Pump that go unused from a surplus purchase or a project that was not completed. Contact us to see what Emsco FB-1600 Triplex Mud Pump we have in inventory. The surplus Emsco FB-1600 Triplex Mud Pump are considered new but may have some weathering depending on where it was stored. Surplus oilfield equipment is usually stored at a yard or warehouse.

We have refurbished Mud Pumpthat have been used and brought up to functional standards. It is considered a ready to use, working Mud Pump. Please contact us for more information about our refurbished Emsco FB-1600 Triplex Mud Pump. These Mud Pump have been used and brought up to functional standards. It is considered a working Mud Pump. Please contact us for more information about the product.

The combination of Rig 44’s high hook load, AC-power, 1,600 HP direct-drive mud pumps, and 7,500 PSI circulating system make it unique to our Canadian fleet. It’s also equipped with bi-fuel engines and a walking system capable of moving the rig with full setback (meaning the drill pipe is left in the derrick during the move).

Want to see more of our 2017 upgrades in action? Check out Trinidad Rig 100, the first ever rig in our US fleet, with its new 1,000,000 lb. hook load, walking system, 25,000 foot racking system with 5 inch drill pipe, and 7,500 PSI capabilities.

14 P-220 Mud Pumps 3 available completely overhauled. The pumps have been machine inspected and all data will be provided. These 2200 HP pumps complete with Southwest fluid end modules which have been reworked and pressure tested by Southwest and P-QUIP liner retention systems. The drives can be set up for AC or DC power. All Master Rig equipment meets or exceeds O.E.M. standards and a complete data pack is furnished with purchase. Please call if you have any questions.

READY TO SHIP - Three (3) completely refurbished 1600 HP Continental Emsco 7500 PSI Mud Pump Packages - liner spray system, suction manifold and dampener, discharge strainer cross, reset relief valve, 20 gallon pulsation dampener, 75 HP charge pump, two (2) GE 752 1000 HP rear mounted motors, 10 HP blower, mounted on a 3 runner skid with loading hitches and much more. Units come with complete data books and have been tested. MRI is a API facility and units comply with API standards.

Duplex mud pump package completely refurbished and never operated. Tri-Services Manufacturing TSM-500 pump, CAT engine. Data book provided with complete refurbishment details.

Mud-Pump Gear Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

14-P-220 Triplex Mud Pump Specifications LINER SIZE (INCHES) 9 8 7½ 7 6½ 6 5½ 5 MAX DISCH. PRESSURE, PSI OF 14-P-220 WITH HIGH PRESSURE FLUID END 2795 3535 4025 4615 5360 6285 7475 7500 SPEED (SPM) INPUT (HP) **HYD (HP) GALLONS PER MINUTE *105 *2200 1980 1215 960 843 735 633 540 454 375 80 1676 1509 925 731 643 560 483 411 346 286 60 1257 1131 694 548 482 420 362 308 259 214 40 838 754 462 366 321 280 241 206 173 143 VOLUME/STROKE (GALLONS) 11.57 9.14 8.03 7 6.03 5.14 4.32 3.57

TECHNICAL SPECIFICATIONS:Rated input at 105 SPM ..........................2200 HPSingle acting Triplex, rated ......................105 SPMStroke .............................................................14"Gear ratio ....................................................3.969Pinion speed ..........................................417 RPMHydro. Test Pressure14-P-220 ............................................10,000 PSI14-P-220 withHigh Pressure Fluid End .......................11,250 PSI

10000 Richmond AvenueHouston, Texas 77042 NATIONAL OILWELL VARCOUnited StatesPhone: 713 346 7500Fax: 713 435 219514-P-220 Triplex Mud Pump

10000 Richmond AvenueHouston, Texas 77042 NATIONAL OILWELL VARCOUnited States © 2006 National Oilwell VarcoPhone: 713 346 7500 PP010000734 Rev. 02

The CMP 1600 mud pump is a single-acting reciprocating triplex mud pump that delivers increased reliability, improved maintainability, and reduced weight and footprint.

Built on the success of the WH-Series 1612 onshore mud pump, the CMP 1600 mud pump accommodates discharge pressure up to 7,500 psi and fluid flow up to 826 galUS/min.

Strategic placement and improved serviceability of the mud pump’s critical components enable much safer and easier access during maintenance and inspection. The two-piece, quick-release piston rod enables piston removal without disturbing the liner; for added simplicity, all sensors, monitoring devices, and optional instruments are wired to a single junction box.